nrf_modem_dect_phy_err

enum nrf_modem_dect_phy_err

#include <nrf_modem/include/nrf_modem_dect_phy.h>

DECT PHY errors.

Enumerator
NRF_MODEM_DECT_PHY_SUCCESS	Success.
NRF_MODEM_DECT_PHY_ERR_LBT_CHANNEL_BUSY	TX operation canceled because LBT channel was busy.
NRF_MODEM_DECT_PHY_ERR_UNSUPPORTED_OP	Operation is not an RX operation; only RX operations may be stopped.
NRF_MODEM_DECT_PHY_ERR_NO_ONGOING_OP	Operation is not executing; it cannot be stopped.
NRF_MODEM_DECT_PHY_ERR_NO_MEMORY	Modem out of memory.
NRF_MODEM_DECT_PHY_ERR_NOT_ALLOWED	Request not possible in current state.
NRF_MODEM_DECT_PHY_OK_WITH_HARQ_RESET	HARQ feedback transmission successful. Out of memory for HARQ processes, HARQ reset requested with feedback format 6.
NRF_MODEM_DECT_PHY_ERR_OP_START_TIME_LATE	Operation start time is in the past.
NRF_MODEM_DECT_PHY_ERR_LBT_START_TIME_LATE	Listen-before-talk start time is in the past.
NRF_MODEM_DECT_PHY_ERR_RF_START_TIME_LATE	RF start time is in the past.
NRF_MODEM_DECT_PHY_ERR_INVALID_START_TIME	Another operation is executing; operation cannot start immediately.
NRF_MODEM_DECT_PHY_ERR_OP_SCHEDULING_CONFLICT	Another operation is scheduled to be executed at the specified time.
NRF_MODEM_DECT_PHY_ERR_OP_TIMEOUT	Operation start time missed and can't be executed.
NRF_MODEM_DECT_PHY_ERR_NO_ONGOING_HARQ_RX	No ongoing HARQ RX; unable to transmit a HARQ response.
NRF_MODEM_DECT_PHY_ERR_PARAMETER_UNAVAILABLE	Could not copy parameters in time.
NRF_MODEM_DECT_PHY_ERR_PAYLOAD_UNAVAILABLE	Could not copy payload in time.
NRF_MODEM_DECT_PHY_ERR_OP_CANCELED	Operation canceled.
NRF_MODEM_DECT_PHY_ERR_COMBINED_OP_FAILED	Operation not executed because combined operation failed.
NRF_MODEM_DECT_PHY_ERR_UNSUPPORTED_CARRIER	Unsupported carrier.
NRF_MODEM_DECT_PHY_ERR_UNSUPPORTED_DATA_SIZE	Unsupported TBS size.
NRF_MODEM_DECT_PHY_ERR_INVALID_NETWORK_ID	Invalid network ID.
NRF_MODEM_DECT_PHY_ERR_INVALID_PHY_HEADER	Invalid physical header format or type.
NRF_MODEM_DECT_PHY_ERR_INVALID_DURATION	Operation duration out of allowed range.
NRF_MODEM_DECT_PHY_ERR_INVALID_PARAMETER	Invalid parameter.
NRF_MODEM_DECT_PHY_ERR_MODEM_ERROR	Modem error.
NRF_MODEM_DECT_PHY_ERR_MODEM_ERROR_RF_STATE	Modem error, invalid RF state.
NRF_MODEM_DECT_PHY_ERR_TEMP_HIGH	Modem temperature is equal or higher than the critical temperature limit.
NRF_MODEM_DECT_PHY_ERR_PROD_LOCK	Failed to lock device after production.