lte_lc_func_mode

enum lte_lc_func_mode

#include <include/modem/lte_lc.h>

Functional mode, used to control RF functionality in the modem.

Note

The values are mapped to modem functional modes as described in "nRF91 AT Commands - Command Reference Guide". Refer to the AT command guide to verify whether a functional mode is supported by a given modem firmware version.

Enumerator
LTE_LC_FUNC_MODE_POWER_OFF	Sets the device to minimum functionality. Disables both transmit and receive RF circuits and deactivates LTE and GNSS.
LTE_LC_FUNC_MODE_NORMAL	Sets the device to full functionality. Both LTE and GNSS will become active if the respective system modes are enabled.
LTE_LC_FUNC_MODE_RX_ONLY	Sets the device to receive only functionality. Can be used, for example, to evaluate connections with lte_lc_conn_eval_params_get(). Note This mode is only supported by modem firmware versions >= 1.3.0.
LTE_LC_FUNC_MODE_OFFLINE	Sets the device to flight mode. Disables both transmit and receive RF circuits and deactivates LTE and GNSS services.
LTE_LC_FUNC_MODE_DEACTIVATE_LTE	Deactivates LTE without shutting down GNSS services.
LTE_LC_FUNC_MODE_ACTIVATE_LTE	Activates LTE without changing GNSS.
LTE_LC_FUNC_MODE_DEACTIVATE_GNSS	Deactivates GNSS without shutting down LTE services.
LTE_LC_FUNC_MODE_ACTIVATE_GNSS	Activates GNSS without changing LTE.
LTE_LC_FUNC_MODE_DEACTIVATE_UICC	Deactivates UICC.
LTE_LC_FUNC_MODE_ACTIVATE_UICC	Activates UICC.
LTE_LC_FUNC_MODE_OFFLINE_UICC_ON	Sets the device to flight mode without shutting down UICC.