stm32-pinctrl.h File Reference

#include <zephyr/dt-bindings/pinctrl/stm32-pinctrl-common.h>

Go to the source code of this file.

Macros
#define	STM32_AF0   0x0
	Pin modes.
#define	STM32_AF1   0x1
#define	STM32_AF2   0x2
#define	STM32_AF3   0x3
#define	STM32_AF4   0x4
#define	STM32_AF5   0x5
#define	STM32_AF6   0x6
#define	STM32_AF7   0x7
#define	STM32_AF8   0x8
#define	STM32_AF9   0x9
#define	STM32_AF10   0xa
#define	STM32_AF11   0xb
#define	STM32_AF12   0xc
#define	STM32_AF13   0xd
#define	STM32_AF14   0xe
#define	STM32_AF15   0xf
#define	STM32_ANALOG   0x10
#define	STM32_GPIO   0x11
#define	STM32_MODE_SHIFT   0U
	Macro to generate pinmux int using port, pin number and mode arguments This is inspired from Linux equivalent st,stm32f429-pinctrl binding.
#define	STM32_MODE_MASK   0x1FU
#define	STM32_LINE_SHIFT   5U
#define	STM32_LINE_MASK   0xFU
#define	STM32_PORT_SHIFT   9U
#define	STM32_PORT_MASK   0xFU
#define	STM32_PINMUX(port, line, mode)
	Pin configuration configuration bit field.
#define	STM32_MODER_INPUT_MODE   (0x0 << STM32_MODER_SHIFT)
	PIN configuration bitfield.
#define	STM32_MODER_OUTPUT_MODE   (0x1 << STM32_MODER_SHIFT)
#define	STM32_MODER_ALT_MODE   (0x2 << STM32_MODER_SHIFT)
#define	STM32_MODER_ANALOG_MODE   (0x3 << STM32_MODER_SHIFT)
#define	STM32_MODER_MASK   0x3
#define	STM32_MODER_SHIFT   4
#define	STM32_OTYPER_PUSH_PULL   (0x0 << STM32_OTYPER_SHIFT)
#define	STM32_OTYPER_OPEN_DRAIN   (0x1 << STM32_OTYPER_SHIFT)
#define	STM32_OTYPER_MASK   0x1
#define	STM32_OTYPER_SHIFT   6
#define	STM32_OSPEEDR_LOW_SPEED   (0x0 << STM32_OSPEEDR_SHIFT)
#define	STM32_OSPEEDR_MEDIUM_SPEED   (0x1 << STM32_OSPEEDR_SHIFT)
#define	STM32_OSPEEDR_HIGH_SPEED   (0x2 << STM32_OSPEEDR_SHIFT)
#define	STM32_OSPEEDR_VERY_HIGH_SPEED   (0x3 << STM32_OSPEEDR_SHIFT)
#define	STM32_OSPEEDR_MASK   0x3
#define	STM32_OSPEEDR_SHIFT   7
#define	STM32_PUPDR_NO_PULL   (0x0 << STM32_PUPDR_SHIFT)
#define	STM32_PUPDR_PULL_UP   (0x1 << STM32_PUPDR_SHIFT)
#define	STM32_PUPDR_PULL_DOWN   (0x2 << STM32_PUPDR_SHIFT)
#define	STM32_PUPDR_MASK   0x3
#define	STM32_PUPDR_SHIFT   9
#define	STM32_ODR_0   (0x0 << STM32_ODR_SHIFT)
#define	STM32_ODR_1   (0x1 << STM32_ODR_SHIFT)
#define	STM32_ODR_MASK   0x1
#define	STM32_ODR_SHIFT   11

Macro Definition Documentation

STM32_AF0

#define STM32_AF0   0x0

Pin modes.

STM32_AF1

#define STM32_AF1   0x1

STM32_AF10

#define STM32_AF10   0xa

STM32_AF11

#define STM32_AF11   0xb

STM32_AF12

#define STM32_AF12   0xc

STM32_AF13

#define STM32_AF13   0xd

STM32_AF14

#define STM32_AF14   0xe

STM32_AF15

#define STM32_AF15   0xf

STM32_AF2

#define STM32_AF2   0x2

STM32_AF3

#define STM32_AF3   0x3

STM32_AF4

#define STM32_AF4   0x4

STM32_AF5

#define STM32_AF5   0x5

STM32_AF6

#define STM32_AF6   0x6

STM32_AF7

#define STM32_AF7   0x7

STM32_AF8

#define STM32_AF8   0x8

STM32_AF9

#define STM32_AF9   0x9

STM32_ANALOG

#define STM32_ANALOG   0x10

STM32_GPIO

#define STM32_GPIO   0x11

STM32_LINE_MASK

#define STM32_LINE_MASK   0xFU

STM32_LINE_SHIFT

#define STM32_LINE_SHIFT   5U

STM32_MODE_MASK

#define STM32_MODE_MASK   0x1FU

STM32_MODE_SHIFT

#define STM32_MODE_SHIFT   0U

Macro to generate pinmux int using port, pin number and mode arguments This is inspired from Linux equivalent st,stm32f429-pinctrl binding.

STM32_MODER_ALT_MODE

#define STM32_MODER_ALT_MODE   (0x2 << STM32_MODER_SHIFT)

STM32_MODER_ANALOG_MODE

#define STM32_MODER_ANALOG_MODE   (0x3 << STM32_MODER_SHIFT)

STM32_MODER_INPUT_MODE

#define STM32_MODER_INPUT_MODE   (0x0 << STM32_MODER_SHIFT)

PIN configuration bitfield.

Pin configuration is coded with the following fields Alternate Functions [ 0 : 3 ] GPIO Mode [ 4 : 5 ] GPIO Output type [ 6 ] GPIO Speed [ 7 : 8 ] GPIO PUPD config [ 9 : 10 ] GPIO Output data [ 11 ]

STM32_MODER_MASK

#define STM32_MODER_MASK   0x3

STM32_MODER_OUTPUT_MODE

#define STM32_MODER_OUTPUT_MODE   (0x1 << STM32_MODER_SHIFT)

STM32_MODER_SHIFT

#define STM32_MODER_SHIFT   4

STM32_ODR_0

#define STM32_ODR_0   (0x0 << STM32_ODR_SHIFT)

STM32_ODR_1

#define STM32_ODR_1   (0x1 << STM32_ODR_SHIFT)

STM32_ODR_MASK

#define STM32_ODR_MASK   0x1

STM32_ODR_SHIFT

#define STM32_ODR_SHIFT   11

STM32_OSPEEDR_HIGH_SPEED

#define STM32_OSPEEDR_HIGH_SPEED   (0x2 << STM32_OSPEEDR_SHIFT)

STM32_OSPEEDR_LOW_SPEED

#define STM32_OSPEEDR_LOW_SPEED   (0x0 << STM32_OSPEEDR_SHIFT)

STM32_OSPEEDR_MASK

#define STM32_OSPEEDR_MASK   0x3

STM32_OSPEEDR_MEDIUM_SPEED

#define STM32_OSPEEDR_MEDIUM_SPEED   (0x1 << STM32_OSPEEDR_SHIFT)

STM32_OSPEEDR_SHIFT

#define STM32_OSPEEDR_SHIFT   7

STM32_OSPEEDR_VERY_HIGH_SPEED

#define STM32_OSPEEDR_VERY_HIGH_SPEED   (0x3 << STM32_OSPEEDR_SHIFT)

STM32_OTYPER_MASK

#define STM32_OTYPER_MASK   0x1

STM32_OTYPER_OPEN_DRAIN

#define STM32_OTYPER_OPEN_DRAIN   (0x1 << STM32_OTYPER_SHIFT)

STM32_OTYPER_PUSH_PULL

#define STM32_OTYPER_PUSH_PULL   (0x0 << STM32_OTYPER_SHIFT)

STM32_OTYPER_SHIFT

#define STM32_OTYPER_SHIFT   6

STM32_PINMUX

#define STM32_PINMUX	(		port,
			line,
			mode
	)

Value:

                (((((port) - 'A') & STM32_PORT_MASK) << STM32_PORT_SHIFT) |    \
                (((line) & STM32_LINE_MASK) << STM32_LINE_SHIFT) |             \
                (((STM32_ ## mode) & STM32_MODE_MASK) << STM32_MODE_SHIFT))

Pin configuration configuration bit field.

Fields:

• mode [ 0 : 4 ]
• line [ 5 : 8 ]
• port [ 9 : 12 ]

Parameters

port	Port ('A'..'K')
line	Pin (0..15)
mode	Mode (ANALOG, GPIO_IN, ALTERNATE).

STM32_PORT_MASK

#define STM32_PORT_MASK   0xFU

STM32_PORT_SHIFT

#define STM32_PORT_SHIFT   9U

STM32_PUPDR_MASK

#define STM32_PUPDR_MASK   0x3

STM32_PUPDR_NO_PULL

#define STM32_PUPDR_NO_PULL   (0x0 << STM32_PUPDR_SHIFT)

STM32_PUPDR_PULL_DOWN

#define STM32_PUPDR_PULL_DOWN   (0x2 << STM32_PUPDR_SHIFT)

STM32_PUPDR_PULL_UP

#define STM32_PUPDR_PULL_UP   (0x1 << STM32_PUPDR_SHIFT)

STM32_PUPDR_SHIFT

#define STM32_PUPDR_SHIFT   9