nxp_pint.h File Reference

#include <fsl_pint.h>

Go to the source code of this file.

Typedefs
typedef void(*	nxp_pint_cb_t) (uint8_t pin, void *user)

Enumerations
enum	nxp_pint_trigger {   NXP_PINT_NONE = kPINT_PinIntEnableNone , NXP_PINT_RISING = kPINT_PinIntEnableRiseEdge , NXP_PINT_FALLING = kPINT_PinIntEnableFallEdge , NXP_PINT_BOTH = kPINT_PinIntEnableBothEdges ,   NXP_PINT_LOW = kPINT_PinIntEnableLowLevel , NXP_PINT_HIGH = kPINT_PinIntEnableHighLevel }
	Driver for Pin interrupt and pattern match engine in NXP MCUs. More...

Functions
int	nxp_pint_pin_enable (uint8_t pin, enum nxp_pint_trigger trigger, bool wake)
	Enable PINT interrupt source.
void	nxp_pint_pin_disable (uint8_t pin)
	disable PINT interrupt source.
int	nxp_pint_pin_set_callback (uint8_t pin, nxp_pint_cb_t cb, void *data)
	Install PINT callback.
void	nxp_pint_pin_unset_callback (uint8_t pin)
	Remove PINT callback.

Typedef Documentation

nxp_pint_cb_t

typedef void(* nxp_pint_cb_t) (uint8_t pin, void *user)

Enumeration Type Documentation

nxp_pint_trigger

enum nxp_pint_trigger

Driver for Pin interrupt and pattern match engine in NXP MCUs.

The Pin interrupt and pattern match engine (PINT) supports sourcing inputs from any pins on GPIO ports 0 and 1 of NXP MCUs featuring the module, and generating interrupts based on these inputs. Pin inputs can generate separate interrupts to the NVIC, or be combined using the PINT's boolean logic based pattern match engine. This driver currently only supports the pin interrupt feature of the PINT.

Pin interrupt sources

Pin interrupt sources available for use.

Enumerator
NXP_PINT_NONE
NXP_PINT_RISING
NXP_PINT_FALLING
NXP_PINT_BOTH
NXP_PINT_LOW
NXP_PINT_HIGH

Function Documentation

nxp_pint_pin_disable()

void nxp_pint_pin_disable

(

uint8_t

pin

)

disable PINT interrupt source.

Parameters

pin	pin interrupt source to disable

nxp_pint_pin_enable()

int nxp_pint_pin_enable	(	uint8_t	pin,
		enum nxp_pint_trigger	trigger,
		bool	wake
	)

Enable PINT interrupt source.

Parameters

pin	pin to use as interrupt source 0-64, corresponding to GPIO0 pin 1 - GPIO1 pin 31)
trigger	one of nxp_pint_trigger flags
wake	indicates if the pin should wakeup the system

nxp_pint_pin_set_callback()

int nxp_pint_pin_set_callback	(	uint8_t	pin,
		nxp_pint_cb_t	cb,
		void *	data
	)

Install PINT callback.

Parameters

pin	interrupt source to install callback for
cb	callback to install
data	user data to include in callback

Returns

0 on success, or negative value on error

nxp_pint_pin_unset_callback()

void nxp_pint_pin_unset_callback

(

uint8_t

pin

)

Remove PINT callback.

Parameters

pin	interrupt source to remove callback for