Pin control

Macros
#define	DT_PINCTRL_BY_IDX(node_id, pc_idx, idx)    DT_CAT6(node_id, _P_pinctrl_, pc_idx, _IDX_, idx, _PH)
	Get a node identifier for a phandle in a pinctrl property by index.
#define	DT_PINCTRL_0(node_id, idx)   DT_PINCTRL_BY_IDX(node_id, 0, idx)
	Get a node identifier from a pinctrl-0 property.
#define	DT_PINCTRL_BY_NAME(node_id, name, idx)    DT_CAT6(node_id, _PINCTRL_NAME_, name, _IDX_, idx, _PH)
	Get a node identifier for a phandle inside a pinctrl node by name.
#define	DT_PINCTRL_NAME_TO_IDX(node_id, name)    DT_CAT4(node_id, _PINCTRL_NAME_, name, _IDX)
	Convert a pinctrl name to its corresponding index.
#define	DT_PINCTRL_IDX_TO_NAME_TOKEN(node_id, pc_idx)    DT_CAT4(node_id, _PINCTRL_IDX_, pc_idx, _TOKEN)
	Convert a pinctrl property index to its name as a token.
#define	DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(node_id, pc_idx)    DT_CAT4(node_id, _PINCTRL_IDX_, pc_idx, _UPPER_TOKEN)
	Like DT_PINCTRL_IDX_TO_NAME_TOKEN(), but with an uppercased result.
#define	DT_NUM_PINCTRLS_BY_IDX(node_id, pc_idx)    DT_CAT4(node_id, _P_pinctrl_, pc_idx, _LEN)
	Get the number of phandles in a pinctrl property.
#define	DT_NUM_PINCTRLS_BY_NAME(node_id, name)    DT_NUM_PINCTRLS_BY_IDX(node_id, DT_PINCTRL_NAME_TO_IDX(node_id, name))
	Like DT_NUM_PINCTRLS_BY_IDX(), but by name instead.
#define	DT_NUM_PINCTRL_STATES(node_id)   DT_CAT(node_id, _PINCTRL_NUM)
	Get the number of pinctrl properties in a node.
#define	DT_PINCTRL_HAS_IDX(node_id, pc_idx)    IS_ENABLED(DT_CAT4(node_id, _PINCTRL_IDX_, pc_idx, _EXISTS))
	Test if a node has a pinctrl property with an index.
#define	DT_PINCTRL_HAS_NAME(node_id, name)    IS_ENABLED(DT_CAT4(node_id, _PINCTRL_NAME_, name, _EXISTS))
	Test if a node has a pinctrl property with a name.
#define	DT_INST_PINCTRL_BY_IDX(inst, pc_idx, idx)    DT_PINCTRL_BY_IDX(DT_DRV_INST(inst), pc_idx, idx)
	Get a node identifier for a phandle in a pinctrl property by index for a DT_DRV_COMPAT instance.
#define	DT_INST_PINCTRL_0(inst, idx)    DT_PINCTRL_BY_IDX(DT_DRV_INST(inst), 0, idx)
	Get a node identifier from a pinctrl-0 property for a DT_DRV_COMPAT instance.
#define	DT_INST_PINCTRL_BY_NAME(inst, name, idx)    DT_PINCTRL_BY_NAME(DT_DRV_INST(inst), name, idx)
	Get a node identifier for a phandle inside a pinctrl node for a DT_DRV_COMPAT instance.
#define	DT_INST_PINCTRL_NAME_TO_IDX(inst, name)    DT_PINCTRL_NAME_TO_IDX(DT_DRV_INST(inst), name)
	Convert a pinctrl name to its corresponding index for a DT_DRV_COMPAT instance.
#define	DT_INST_PINCTRL_IDX_TO_NAME_TOKEN(inst, pc_idx)    DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_DRV_INST(inst), pc_idx)
	Convert a pinctrl index to its name as an uppercased token.
#define	DT_INST_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(inst, pc_idx)    DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(DT_DRV_INST(inst), pc_idx)
	Convert a pinctrl index to its name as an uppercased token.
#define	DT_INST_NUM_PINCTRLS_BY_IDX(inst, pc_idx)    DT_NUM_PINCTRLS_BY_IDX(DT_DRV_INST(inst), pc_idx)
	Get the number of phandles in a pinctrl property for a DT_DRV_COMPAT instance.
#define	DT_INST_NUM_PINCTRLS_BY_NAME(inst, name)    DT_NUM_PINCTRLS_BY_NAME(DT_DRV_INST(inst), name)
	Like DT_INST_NUM_PINCTRLS_BY_IDX(), but by name instead.
#define	DT_INST_NUM_PINCTRL_STATES(inst)    DT_NUM_PINCTRL_STATES(DT_DRV_INST(inst))
	Get the number of pinctrl properties in a DT_DRV_COMPAT instance.
#define	DT_INST_PINCTRL_HAS_IDX(inst, pc_idx)    DT_PINCTRL_HAS_IDX(DT_DRV_INST(inst), pc_idx)
	Test if a DT_DRV_COMPAT instance has a pinctrl property with an index.
#define	DT_INST_PINCTRL_HAS_NAME(inst, name)    DT_PINCTRL_HAS_NAME(DT_DRV_INST(inst), name)
	Test if a DT_DRV_COMPAT instance has a pinctrl property with a name.

Detailed Description

Macro Definition Documentation

DT_INST_NUM_PINCTRL_STATES

#define DT_INST_NUM_PINCTRL_STATES

(

inst

)

DT_NUM_PINCTRL_STATES(DT_DRV_INST(inst))

#include <zephyr/devicetree/pinctrl.h>

Get the number of pinctrl properties in a DT_DRV_COMPAT instance.

This is equivalent to DT_NUM_PINCTRL_STATES(DT_DRV_INST(inst)).

Parameters

inst	instance number

Returns

number of pinctrl properties in the instance

DT_INST_NUM_PINCTRLS_BY_IDX

#define DT_INST_NUM_PINCTRLS_BY_IDX	(		inst,
			pc_idx
	)		DT_NUM_PINCTRLS_BY_IDX(DT_DRV_INST(inst), pc_idx)

#include <zephyr/devicetree/pinctrl.h>

Get the number of phandles in a pinctrl property for a DT_DRV_COMPAT instance.

This is equivalent to DT_NUM_PINCTRLS_BY_IDX(DT_DRV_INST(inst), pc_idx).

Parameters

inst	instance number
pc_idx	index of the pinctrl property itself

Returns

number of phandles in the property with that index

DT_INST_NUM_PINCTRLS_BY_NAME

#define DT_INST_NUM_PINCTRLS_BY_NAME	(		inst,
			name
	)		DT_NUM_PINCTRLS_BY_NAME(DT_DRV_INST(inst), name)

#include <zephyr/devicetree/pinctrl.h>

Like DT_INST_NUM_PINCTRLS_BY_IDX(), but by name instead.

This is equivalent to DT_NUM_PINCTRLS_BY_NAME(DT_DRV_INST(inst), name).

Parameters

inst	instance number
name	lowercase-and-underscores name of the pinctrl property

Returns

number of phandles in the property with that name

DT_INST_PINCTRL_0

#define DT_INST_PINCTRL_0	(		inst,
			idx
	)		DT_PINCTRL_BY_IDX(DT_DRV_INST(inst), 0, idx)

#include <zephyr/devicetree/pinctrl.h>

Get a node identifier from a pinctrl-0 property for a DT_DRV_COMPAT instance.

This is equivalent to:

DT_PINCTRL_BY_IDX(DT_DRV_INST(inst), 0, idx)

It is provided for convenience since pinctrl-0 is commonly used.

Parameters

inst	instance number
idx	index into the pinctrl-0 property

Returns

node identifier for the phandle at index idx in the pinctrl-0 property of that instance

DT_INST_PINCTRL_BY_IDX

#define DT_INST_PINCTRL_BY_IDX	(		inst,
			pc_idx,
			idx
	)		DT_PINCTRL_BY_IDX(DT_DRV_INST(inst), pc_idx, idx)

#include <zephyr/devicetree/pinctrl.h>

Get a node identifier for a phandle in a pinctrl property by index for a DT_DRV_COMPAT instance.

This is equivalent to DT_PINCTRL_BY_IDX(DT_DRV_INST(inst), pc_idx, idx).

Parameters

inst	instance number
pc_idx	index of the pinctrl property itself
idx	index into the value of the pinctrl property

Returns

node identifier for the phandle at index 'idx' in 'pinctrl-'pc_idx''

DT_INST_PINCTRL_BY_NAME

#define DT_INST_PINCTRL_BY_NAME	(		inst,
			name,
			idx
	)		DT_PINCTRL_BY_NAME(DT_DRV_INST(inst), name, idx)

#include <zephyr/devicetree/pinctrl.h>

Get a node identifier for a phandle inside a pinctrl node for a DT_DRV_COMPAT instance.

This is equivalent to DT_PINCTRL_BY_NAME(DT_DRV_INST(inst), name, idx).

Parameters

inst	instance number
name	lowercase-and-underscores pinctrl property name
idx	index into the value of the named pinctrl property

Returns

node identifier for the phandle at that index in the pinctrl property

DT_INST_PINCTRL_HAS_IDX

#define DT_INST_PINCTRL_HAS_IDX	(		inst,
			pc_idx
	)		DT_PINCTRL_HAS_IDX(DT_DRV_INST(inst), pc_idx)

#include <zephyr/devicetree/pinctrl.h>

Test if a DT_DRV_COMPAT instance has a pinctrl property with an index.

This is equivalent to DT_PINCTRL_HAS_IDX(DT_DRV_INST(inst), pc_idx).

Parameters

inst	instance number
pc_idx	index of a pinctrl property whose existence to check

Returns

1 if the property exists, 0 otherwise

DT_INST_PINCTRL_HAS_NAME

#define DT_INST_PINCTRL_HAS_NAME	(		inst,
			name
	)		DT_PINCTRL_HAS_NAME(DT_DRV_INST(inst), name)

#include <zephyr/devicetree/pinctrl.h>

Test if a DT_DRV_COMPAT instance has a pinctrl property with a name.

This is equivalent to DT_PINCTRL_HAS_NAME(DT_DRV_INST(inst), name).

Parameters

inst	instance number
name	lowercase-and-underscores pinctrl property name to check

Returns

1 if the property exists, 0 otherwise

DT_INST_PINCTRL_IDX_TO_NAME_TOKEN

#define DT_INST_PINCTRL_IDX_TO_NAME_TOKEN	(		inst,
			pc_idx
	)		DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_DRV_INST(inst), pc_idx)

#include <zephyr/devicetree/pinctrl.h>

Convert a pinctrl index to its name as an uppercased token.

This is equivalent to DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_DRV_INST(inst), pc_idx).

Parameters

inst	instance number
pc_idx	index of the pinctrl property itself

Returns

name of the pin control property as a token

DT_INST_PINCTRL_IDX_TO_NAME_UPPER_TOKEN

#define DT_INST_PINCTRL_IDX_TO_NAME_UPPER_TOKEN	(		inst,
			pc_idx
	)		DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(DT_DRV_INST(inst), pc_idx)

#include <zephyr/devicetree/pinctrl.h>

Convert a pinctrl index to its name as an uppercased token.

This is equivalent to DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN(DT_DRV_INST(inst), idx).

Parameters

inst	instance number
pc_idx	index of the pinctrl property itself

Returns

name of the pin control property as an uppercase token

DT_INST_PINCTRL_NAME_TO_IDX

#define DT_INST_PINCTRL_NAME_TO_IDX	(		inst,
			name
	)		DT_PINCTRL_NAME_TO_IDX(DT_DRV_INST(inst), name)

#include <zephyr/devicetree/pinctrl.h>

Convert a pinctrl name to its corresponding index for a DT_DRV_COMPAT instance.

This is equivalent to DT_PINCTRL_NAME_TO_IDX(DT_DRV_INST(inst), name).

Parameters

inst	instance number
name	lowercase-and-underscores name of the pinctrl whose index to get

Returns

integer literal for the index of the pinctrl property with that name

DT_NUM_PINCTRL_STATES

#define DT_NUM_PINCTRL_STATES

(

node_id

)

DT_CAT(node_id, _PINCTRL_NUM)

#include <zephyr/devicetree/pinctrl.h>

Get the number of pinctrl properties in a node.

This expands to 0 if there are no pinctrl-i properties. Otherwise, it expands to the number of such properties.

Example devicetree fragment:

n1: node-1 {
        pinctrl-0 = <...>;
        pinctrl-1 = <...>;
};

n2: node-2 {
};

Example usage:

DT_NUM_PINCTRL_STATES(DT_NODELABEL(n1)) // 2
DT_NUM_PINCTRL_STATES(DT_NODELABEL(n2)) // 0

Parameters

node_id

node identifier; may or may not have any pinctrl properties

Returns

number of pinctrl properties in the node

DT_NUM_PINCTRLS_BY_IDX

#define DT_NUM_PINCTRLS_BY_IDX	(		node_id,
			pc_idx
	)		DT_CAT4(node_id, _P_pinctrl_, pc_idx, _LEN)

#include <zephyr/devicetree/pinctrl.h>

Get the number of phandles in a pinctrl property.

Example devicetree fragment:

n1: node-1 {
        pinctrl-0 = <&foo &bar>;
};

n2: node-2 {
        pinctrl-0 = <&baz>;
};

Example usage:

DT_NUM_PINCTRLS_BY_IDX(DT_NODELABEL(n1), 0) // 2
DT_NUM_PINCTRLS_BY_IDX(DT_NODELABEL(n2), 0) // 1

Parameters

node_id	node identifier with a pinctrl property
pc_idx	index of the pinctrl property itself

Returns

number of phandles in the property with that index

DT_NUM_PINCTRLS_BY_NAME

#define DT_NUM_PINCTRLS_BY_NAME	(		node_id,
			name
	)		DT_NUM_PINCTRLS_BY_IDX(node_id, DT_PINCTRL_NAME_TO_IDX(node_id, name))

#include <zephyr/devicetree/pinctrl.h>

Like DT_NUM_PINCTRLS_BY_IDX(), but by name instead.

Example devicetree fragment:

n: node {
        pinctrl-0 = <&foo &bar>;
        pinctrl-1 = <&baz>
        pinctrl-names = "default", "sleep";
};

Example usage:

DT_NUM_PINCTRLS_BY_NAME(DT_NODELABEL(n), default) // 2
DT_NUM_PINCTRLS_BY_NAME(DT_NODELABEL(n), sleep)   // 1

Parameters

node_id	node identifier with a pinctrl property
name	lowercase-and-underscores name name of the pinctrl property

Returns

number of phandles in the property with that name

DT_PINCTRL_0

#define DT_PINCTRL_0	(		node_id,
			idx
	)		DT_PINCTRL_BY_IDX(node_id, 0, idx)

#include <zephyr/devicetree/pinctrl.h>

Get a node identifier from a pinctrl-0 property.

This is equivalent to:

DT_PINCTRL_BY_IDX(node_id, 0, idx)

It is provided for convenience since pinctrl-0 is commonly used.

Parameters

node_id	node with a pinctrl-0 property
idx	index into the pinctrl-0 property

Returns

node identifier for the phandle at index idx in the pinctrl-0 property of that node

DT_PINCTRL_BY_IDX

#define DT_PINCTRL_BY_IDX	(		node_id,
			pc_idx,
			idx
	)		DT_CAT6(node_id, _P_pinctrl_, pc_idx, _IDX_, idx, _PH)

#include <zephyr/devicetree/pinctrl.h>

Get a node identifier for a phandle in a pinctrl property by index.

Example devicetree fragment:

n: node {
        pinctrl-0 = <&foo &bar>;
        pinctrl-1 = <&baz &blub>;
}

Example usage:

DT_PINCTRL_BY_IDX(DT_NODELABEL(n), 0, 1) // DT_NODELABEL(bar)
DT_PINCTRL_BY_IDX(DT_NODELABEL(n), 1, 0) // DT_NODELABEL(baz)

Parameters

node_id	node with a pinctrl-'pc_idx' property
pc_idx	index of the pinctrl property itself
idx	index into the value of the pinctrl property

Returns

node identifier for the phandle at index 'idx' in 'pinctrl-'pc_idx''

DT_PINCTRL_BY_NAME

#define DT_PINCTRL_BY_NAME	(		node_id,
			name,
			idx
	)		DT_CAT6(node_id, _PINCTRL_NAME_, name, _IDX_, idx, _PH)

#include <zephyr/devicetree/pinctrl.h>

Get a node identifier for a phandle inside a pinctrl node by name.

Example devicetree fragment:

n: node {
        pinctrl-0 = <&foo &bar>;
        pinctrl-1 = <&baz &blub>;
        pinctrl-names = "default", "sleep";
};

Example usage:

DT_PINCTRL_BY_NAME(DT_NODELABEL(n), default, 1) // DT_NODELABEL(bar)
DT_PINCTRL_BY_NAME(DT_NODELABEL(n), sleep, 0) // DT_NODELABEL(baz)

Parameters

node_id	node with a named pinctrl property
name	lowercase-and-underscores pinctrl property name
idx	index into the value of the named pinctrl property

Returns

node identifier for the phandle at that index in the pinctrl property

DT_PINCTRL_HAS_IDX

#define DT_PINCTRL_HAS_IDX	(		node_id,
			pc_idx
	)		IS_ENABLED(DT_CAT4(node_id, _PINCTRL_IDX_, pc_idx, _EXISTS))

#include <zephyr/devicetree/pinctrl.h>

Test if a node has a pinctrl property with an index.

This expands to 1 if the pinctrl-'idx' property exists. Otherwise, it expands to 0.

Example devicetree fragment:

n1: node-1 {
        pinctrl-0 = <...>;
        pinctrl-1 = <...>;
};

n2: node-2 {
};

Example usage:

DT_PINCTRL_HAS_IDX(DT_NODELABEL(n1), 0) // 1
DT_PINCTRL_HAS_IDX(DT_NODELABEL(n1), 1) // 1
DT_PINCTRL_HAS_IDX(DT_NODELABEL(n1), 2) // 0
DT_PINCTRL_HAS_IDX(DT_NODELABEL(n2), 0) // 0

Parameters

node_id	node identifier; may or may not have any pinctrl properties
pc_idx	index of a pinctrl property whose existence to check

Returns

1 if the property exists, 0 otherwise

DT_PINCTRL_HAS_NAME

#define DT_PINCTRL_HAS_NAME	(		node_id,
			name
	)		IS_ENABLED(DT_CAT4(node_id, _PINCTRL_NAME_, name, _EXISTS))

#include <zephyr/devicetree/pinctrl.h>

Test if a node has a pinctrl property with a name.

This expands to 1 if the named pinctrl property exists. Otherwise, it expands to 0.

Example devicetree fragment:

n1: node-1 {
        pinctrl-0 = <...>;
        pinctrl-names = "default";
};

n2: node-2 {
};

Example usage:

DT_PINCTRL_HAS_NAME(DT_NODELABEL(n1), default) // 1
DT_PINCTRL_HAS_NAME(DT_NODELABEL(n1), sleep)   // 0
DT_PINCTRL_HAS_NAME(DT_NODELABEL(n2), default) // 0

Parameters

node_id	node identifier; may or may not have any pinctrl properties
name	lowercase-and-underscores pinctrl property name to check

Returns

1 if the property exists, 0 otherwise

DT_PINCTRL_IDX_TO_NAME_TOKEN

#define DT_PINCTRL_IDX_TO_NAME_TOKEN	(		node_id,
			pc_idx
	)		DT_CAT4(node_id, _PINCTRL_IDX_, pc_idx, _TOKEN)

#include <zephyr/devicetree/pinctrl.h>

Convert a pinctrl property index to its name as a token.

This allows you to get a pinctrl property's name, and "remove the quotes" from it.

DT_PINCTRL_IDX_TO_NAME_TOKEN() can only be used if the node has a pinctrl-'pc_idx' property and a pinctrl-names property element for that index. It is an error to use it in other circumstances.

Example devicetree fragment:

n: node {
        pinctrl-0 = <...>;
        pinctrl-1 = <...>;
        pinctrl-names = "default", "f.o.o2";
};

Example usage:

DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_NODELABEL(n), 0) // default
DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_NODELABEL(n), 1) // f_o_o2

The same caveats and restrictions that apply to DT_STRING_TOKEN()'s return value also apply here.

Parameters

node_id	node identifier
pc_idx	index of a pinctrl property in that node

Returns

name of the pinctrl property, as a token, without any quotes and with non-alphanumeric characters converted to underscores

DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN

#define DT_PINCTRL_IDX_TO_NAME_UPPER_TOKEN	(		node_id,
			pc_idx
	)		DT_CAT4(node_id, _PINCTRL_IDX_, pc_idx, _UPPER_TOKEN)

#include <zephyr/devicetree/pinctrl.h>

Like DT_PINCTRL_IDX_TO_NAME_TOKEN(), but with an uppercased result.

This does the a similar conversion as DT_PINCTRL_IDX_TO_NAME_TOKEN(node_id, pc_idx). The only difference is that alphabetical characters in the result are uppercased.

Example devicetree fragment:

n: node {
        pinctrl-0 = <...>;
        pinctrl-1 = <...>;
        pinctrl-names = "default", "f.o.o2";
};

Example usage:

DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_NODELABEL(n), 0) // DEFAULT
DT_PINCTRL_IDX_TO_NAME_TOKEN(DT_NODELABEL(n), 1) // F_O_O2

The same caveats and restrictions that apply to DT_STRING_UPPER_TOKEN()'s return value also apply here.

DT_PINCTRL_NAME_TO_IDX

#define DT_PINCTRL_NAME_TO_IDX	(		node_id,
			name
	)		DT_CAT4(node_id, _PINCTRL_NAME_, name, _IDX)

#include <zephyr/devicetree/pinctrl.h>

Convert a pinctrl name to its corresponding index.

Example devicetree fragment:

n: node {
        pinctrl-0 = <&foo &bar>;
        pinctrl-1 = <&baz &blub>;
        pinctrl-names = "default", "sleep";
};

Example usage:

DT_PINCTRL_NAME_TO_IDX(DT_NODELABEL(n), default) // 0
DT_PINCTRL_NAME_TO_IDX(DT_NODELABEL(n), sleep)   // 1

Parameters

node_id	node identifier with a named pinctrl property
name	lowercase-and-underscores name name of the pinctrl whose index to get

Returns

integer literal for the index of the pinctrl property with that name