Crypto Cipher APIs.
More...
|
typedef int(* | block_op_t) (struct cipher_ctx *ctx, struct cipher_pkt *pkt) |
|
typedef int(* | cbc_op_t) (struct cipher_ctx *ctx, struct cipher_pkt *pkt, uint8_t *iv) |
|
typedef int(* | ctr_op_t) (struct cipher_ctx *ctx, struct cipher_pkt *pkt, uint8_t *ctr) |
|
typedef int(* | ccm_op_t) (struct cipher_ctx *ctx, struct cipher_aead_pkt *pkt, uint8_t *nonce) |
|
typedef int(* | gcm_op_t) (struct cipher_ctx *ctx, struct cipher_aead_pkt *pkt, uint8_t *nonce) |
|
typedef void(* | cipher_completion_cb) (struct cipher_pkt *completed, int status) |
|
|
static int | cipher_begin_session (const struct device *dev, struct cipher_ctx *ctx, enum cipher_algo algo, enum cipher_mode mode, enum cipher_op optype) |
| Setup a crypto session.
|
|
static int | cipher_free_session (const struct device *dev, struct cipher_ctx *ctx) |
| Cleanup a crypto session.
|
|
static int | cipher_callback_set (const struct device *dev, cipher_completion_cb cb) |
| Registers an async crypto op completion callback with the driver.
|
|
static int | cipher_block_op (struct cipher_ctx *ctx, struct cipher_pkt *pkt) |
| Perform single-block crypto operation (ECB cipher mode).
|
|
static int | cipher_cbc_op (struct cipher_ctx *ctx, struct cipher_pkt *pkt, uint8_t *iv) |
| Perform Cipher Block Chaining (CBC) crypto operation.
|
|
static int | cipher_ctr_op (struct cipher_ctx *ctx, struct cipher_pkt *pkt, uint8_t *iv) |
| Perform Counter (CTR) mode crypto operation.
|
|
static int | cipher_ccm_op (struct cipher_ctx *ctx, struct cipher_aead_pkt *pkt, uint8_t *nonce) |
| Perform Counter with CBC-MAC (CCM) mode crypto operation.
|
|
static int | cipher_gcm_op (struct cipher_ctx *ctx, struct cipher_aead_pkt *pkt, uint8_t *nonce) |
| Perform Galois/Counter Mode (GCM) crypto operation.
|
|
Crypto Cipher APIs.
◆ block_op_t
◆ cbc_op_t
◆ ccm_op_t
◆ cipher_completion_cb
typedef void(* cipher_completion_cb) (struct cipher_pkt *completed, int status) |
◆ ctr_op_t
◆ gcm_op_t
◆ cipher_algo
◆ cipher_mode
#include <zephyr/crypto/cipher.h>
Possible cipher mode options.
More to be added as required.
Enumerator |
---|
CRYPTO_CIPHER_MODE_ECB | |
CRYPTO_CIPHER_MODE_CBC | |
CRYPTO_CIPHER_MODE_CTR | |
CRYPTO_CIPHER_MODE_CCM | |
CRYPTO_CIPHER_MODE_GCM | |
◆ cipher_op
#include <zephyr/crypto/cipher.h>
Cipher Operation.
Enumerator |
---|
CRYPTO_CIPHER_OP_DECRYPT | |
CRYPTO_CIPHER_OP_ENCRYPT | |
◆ cipher_begin_session()
#include <zephyr/crypto/crypto.h>
Setup a crypto session.
Initializes one time parameters, like the session key, algorithm and cipher mode which may remain constant for all operations in the session. The state may be cached in hardware and/or driver data state variables.
- Parameters
-
dev | Pointer to the device structure for the driver instance. |
ctx | Pointer to the context structure. Various one time parameters like key, keylength, etc. are supplied via this structure. The structure documentation specifies which fields are to be populated by the app before making this call. |
algo | The crypto algorithm to be used in this session. e.g AES |
mode | The cipher mode to be used in this session. e.g CBC, CTR |
optype | Whether we should encrypt or decrypt in this session |
- Returns
- 0 on success, negative errno code on fail.
◆ cipher_block_op()
#include <zephyr/crypto/crypto.h>
Perform single-block crypto operation (ECB cipher mode).
This should not be overloaded to operate on multiple blocks for security reasons.
- Parameters
-
ctx | Pointer to the crypto context of this op. |
pkt | Structure holding the input/output buffer pointers. |
- Returns
- 0 on success, negative errno code on fail.
◆ cipher_callback_set()
#include <zephyr/crypto/crypto.h>
Registers an async crypto op completion callback with the driver.
The application can register an async crypto op completion callback handler to be invoked by the driver, on completion of a prior request submitted via cipher_do_op(). Based on crypto device hardware semantics, this is likely to be invoked from an ISR context.
- Parameters
-
dev | Pointer to the device structure for the driver instance. |
cb | Pointer to application callback to be called by the driver. |
- Returns
- 0 on success, -ENOTSUP if the driver does not support async op, negative errno code on other error.
◆ cipher_cbc_op()
#include <zephyr/crypto/crypto.h>
Perform Cipher Block Chaining (CBC) crypto operation.
- Parameters
-
ctx | Pointer to the crypto context of this op. |
pkt | Structure holding the input/output buffer pointers. |
iv | Initialization Vector (IV) for the operation. Same IV value should not be reused across multiple operations (within a session context) for security. |
- Returns
- 0 on success, negative errno code on fail.
◆ cipher_ccm_op()
#include <zephyr/crypto/crypto.h>
Perform Counter with CBC-MAC (CCM) mode crypto operation.
- Parameters
-
ctx | Pointer to the crypto context of this op. |
pkt | Structure holding the input/output, Associated Data (AD) and auth tag buffer pointers. |
nonce | Nonce for the operation. Same nonce value should not be reused across multiple operations (within a session context) for security. |
- Returns
- 0 on success, negative errno code on fail.
◆ cipher_ctr_op()
#include <zephyr/crypto/crypto.h>
Perform Counter (CTR) mode crypto operation.
- Parameters
-
ctx | Pointer to the crypto context of this op. |
pkt | Structure holding the input/output buffer pointers. |
iv | Initialization Vector (IV) for the operation. We use a split counter formed by appending IV and ctr. Consequently ivlen = keylen - ctrlen. 'ctrlen' is specified during session setup through the 'ctx.mode_params.ctr_params.ctr_len' parameter. IV should not be reused across multiple operations (within a session context) for security. The non-IV part of the split counter is transparent to the caller and is fully managed by the crypto provider. |
- Returns
- 0 on success, negative errno code on fail.
◆ cipher_free_session()
static int cipher_free_session |
( |
const struct device * |
dev, |
|
|
struct cipher_ctx * |
ctx |
|
) |
| |
|
inlinestatic |
#include <zephyr/crypto/crypto.h>
Cleanup a crypto session.
Clears the hardware and/or driver state of a previous session.
- Parameters
-
dev | Pointer to the device structure for the driver instance. |
ctx | Pointer to the crypto context structure of the session to be freed. |
- Returns
- 0 on success, negative errno code on fail.
◆ cipher_gcm_op()
#include <zephyr/crypto/crypto.h>
Perform Galois/Counter Mode (GCM) crypto operation.
- Parameters
-
ctx | Pointer to the crypto context of this op. |
pkt | Structure holding the input/output, Associated Data (AD) and auth tag buffer pointers. |
nonce | Nonce for the operation. Same nonce value should not be reused across multiple operations (within a session context) for security. |
- Returns
- 0 on success, negative errno code on fail.