Bluetooth Mesh SAR Configuration Client Model

Bluetooth Mesh. More...

Data Structures
struct	bt_mesh_sar_cfg_cli
	Mesh SAR Configuration Client Model Context. More...

Macros
#define	BT_MESH_MODEL_SAR_CFG_CLI(_cli)
	SAR Configuration Client model composition data entry.

Functions
int	bt_mesh_sar_cfg_cli_transmitter_get (uint16_t net_idx, uint16_t addr, struct bt_mesh_sar_tx *rsp)
	Get the SAR Transmitter state of the target node.
int	bt_mesh_sar_cfg_cli_transmitter_set (uint16_t net_idx, uint16_t addr, const struct bt_mesh_sar_tx *set, struct bt_mesh_sar_tx *rsp)
	Set the SAR Transmitter state of the target node.
int	bt_mesh_sar_cfg_cli_receiver_get (uint16_t net_idx, uint16_t addr, struct bt_mesh_sar_rx *rsp)
	Get the SAR Receiver state of the target node.
int	bt_mesh_sar_cfg_cli_receiver_set (uint16_t net_idx, uint16_t addr, const struct bt_mesh_sar_rx *set, struct bt_mesh_sar_rx *rsp)
	Set the SAR Receiver state of the target node.
int32_t	bt_mesh_sar_cfg_cli_timeout_get (void)
	Get the current transmission timeout value.
void	bt_mesh_sar_cfg_cli_timeout_set (int32_t timeout)
	Set the transmission timeout value.

Detailed Description

Bluetooth Mesh.

Macro Definition Documentation

BT_MESH_MODEL_SAR_CFG_CLI

#define BT_MESH_MODEL_SAR_CFG_CLI

(

_cli

)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Value:

        BT_MESH_MODEL_CB(BT_MESH_MODEL_ID_SAR_CFG_CLI,                         \
                         _bt_mesh_sar_cfg_cli_op, _cli.pub, _cli,                  \
                         &_bt_mesh_sar_cfg_cli_cb)

SAR Configuration Client model composition data entry.

Parameters

[in]

_cli

Pointer to a Bluetooth Mesh SAR Configuration Client Model instance.

Function Documentation

bt_mesh_sar_cfg_cli_receiver_get()

int bt_mesh_sar_cfg_cli_receiver_get	(	uint16_t	net_idx,
		uint16_t	addr,
		struct bt_mesh_sar_rx *	rsp
	)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Get the SAR Receiver state of the target node.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
rsp	Status response parameter.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_sar_cfg_cli_receiver_set()

int bt_mesh_sar_cfg_cli_receiver_set	(	uint16_t	net_idx,
		uint16_t	addr,
		const struct bt_mesh_sar_rx *	set,
		struct bt_mesh_sar_rx *	rsp
	)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Set the SAR Receiver state of the target node.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
set	New SAR Receiver state to set on the target node.
rsp	Status response parameter.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_sar_cfg_cli_timeout_get()

int32_t bt_mesh_sar_cfg_cli_timeout_get

(

void

)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Get the current transmission timeout value.

Returns

The configured transmission timeout in milliseconds.

bt_mesh_sar_cfg_cli_timeout_set()

void bt_mesh_sar_cfg_cli_timeout_set

(

int32_t

timeout

)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Set the transmission timeout value.

Parameters

timeout

The new transmission timeout.

bt_mesh_sar_cfg_cli_transmitter_get()

int bt_mesh_sar_cfg_cli_transmitter_get	(	uint16_t	net_idx,
		uint16_t	addr,
		struct bt_mesh_sar_tx *	rsp
	)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Get the SAR Transmitter state of the target node.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
rsp	Status response parameter.

Returns

0 on success, or (negative) error code on failure.

bt_mesh_sar_cfg_cli_transmitter_set()

int bt_mesh_sar_cfg_cli_transmitter_set	(	uint16_t	net_idx,
		uint16_t	addr,
		const struct bt_mesh_sar_tx *	set,
		struct bt_mesh_sar_tx *	rsp
	)

#include <zephyr/bluetooth/mesh/sar_cfg_cli.h>

Set the SAR Transmitter state of the target node.

Parameters

net_idx	Network index to encrypt with.
addr	Target node address.
set	New SAR Transmitter state to set on the target node.
rsp	Status response parameter.

Returns

0 on success, or (negative) error code on failure.