Remote Provisioning Client model

Data Structures
struct	bt_mesh_rpr_scan_status
	Scan status response. More...
struct	bt_mesh_rpr_caps
	Remote Provisioning Server scanning capabilities. More...
struct	bt_mesh_rpr_cli
	Remote Provisioning Client model instance. More...

Macros
#define	BT_MESH_RPR_SCAN_MAX_DEVS_ANY   0
	Special value for the max_devs parameter of bt_mesh_rpr_scan_start.
#define	BT_MESH_MODEL_RPR_CLI(_cli)
	Remote Provisioning Client model composition data entry.

Functions
int	bt_mesh_rpr_scan_caps_get (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, struct bt_mesh_rpr_caps *caps)
	Get scanning capabilities of Remote Provisioning Server.
int	bt_mesh_rpr_scan_get (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, struct bt_mesh_rpr_scan_status *status)
	Get current scanning state of Remote Provisioning Server.
int	bt_mesh_rpr_scan_start (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, const uint8_t uuid[16], uint8_t timeout, uint8_t max_devs, struct bt_mesh_rpr_scan_status *status)
	Start scanning for unprovisioned devices.
int	bt_mesh_rpr_scan_start_ext (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, const uint8_t uuid[16], uint8_t timeout, const uint8_t *ad_types, size_t ad_count)
	Start extended scanning for unprovisioned devices.
int	bt_mesh_rpr_scan_stop (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, struct bt_mesh_rpr_scan_status *status)
	Stop any ongoing scanning on the Remote Provisioning Server.
int	bt_mesh_rpr_link_get (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, struct bt_mesh_rpr_link *rsp)
	Get the current link status of the Remote Provisioning Server.
int	bt_mesh_rpr_link_close (struct bt_mesh_rpr_cli *cli, const struct bt_mesh_rpr_node *srv, struct bt_mesh_rpr_link *rsp)
	Close any open link on the Remote Provisioning Server.
int32_t	bt_mesh_rpr_cli_timeout_get (void)
	Get the current transmission timeout value.
void	bt_mesh_rpr_cli_timeout_set (int32_t timeout)
	Set the transmission timeout value.

Detailed Description

Macro Definition Documentation

BT_MESH_MODEL_RPR_CLI

#define BT_MESH_MODEL_RPR_CLI

(

_cli

)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Value:

        BT_MESH_MODEL_CB(BT_MESH_MODEL_ID_REMOTE_PROV_CLI,                     \
                         _bt_mesh_rpr_cli_op, NULL, _cli, &_bt_mesh_rpr_cli_cb)

Remote Provisioning Client model composition data entry.

Parameters

_cli	Pointer to a Remote Provisioning Client model instance.

BT_MESH_RPR_SCAN_MAX_DEVS_ANY

#define BT_MESH_RPR_SCAN_MAX_DEVS_ANY   0

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Special value for the max_devs parameter of bt_mesh_rpr_scan_start.

Tells the Remote Provisioning Server not to put restrictions on the max number of devices reported to the Client.

Function Documentation

bt_mesh_rpr_cli_timeout_get()

int32_t bt_mesh_rpr_cli_timeout_get

(

void

)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Get the current transmission timeout value.

Returns

The configured transmission timeout in milliseconds.

bt_mesh_rpr_cli_timeout_set()

void bt_mesh_rpr_cli_timeout_set

(

int32_t

timeout

)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Set the transmission timeout value.

The transmission timeout controls the amount of time the Remote Provisioning Client models will wait for a response from the Server.

Parameters

timeout

The new transmission timeout.

bt_mesh_rpr_link_close()

int bt_mesh_rpr_link_close	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		struct bt_mesh_rpr_link *	rsp
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Close any open link on the Remote Provisioning Server.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
rsp	Link status response buffer.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_rpr_link_get()

int bt_mesh_rpr_link_get	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		struct bt_mesh_rpr_link *	rsp
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Get the current link status of the Remote Provisioning Server.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
rsp	Link status response buffer.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_rpr_scan_caps_get()

int bt_mesh_rpr_scan_caps_get	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		struct bt_mesh_rpr_caps *	caps
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Get scanning capabilities of Remote Provisioning Server.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
caps	Capabilities response buffer.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_rpr_scan_get()

int bt_mesh_rpr_scan_get	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		struct bt_mesh_rpr_scan_status *	status
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Get current scanning state of Remote Provisioning Server.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
status	Scan status response buffer.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_rpr_scan_start()

int bt_mesh_rpr_scan_start	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		const uint8_t	uuid[16],
		uint8_t	timeout,
		uint8_t	max_devs,
		struct bt_mesh_rpr_scan_status *	status
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Start scanning for unprovisioned devices.

Tells the Remote Provisioning Server to start scanning for unprovisioned devices. The Server will report back the results through the bt_mesh_rpr_cli::scan_report callback.

Use the uuid parameter to scan for a specific device, or leave it as NULL to report all unprovisioned devices.

The Server will ignore duplicates, and report up to max_devs number of devices. Requesting a max_devs number that's higher than the Server's capability will result in an error.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
uuid	Device UUID to scan for, or NULL to report all devices.
timeout	Scan timeout in seconds. Must be at least 1 second.
max_devs	Max number of devices to report, or 0 to report as many as possible.
status	Scan status response buffer.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_rpr_scan_start_ext()

int bt_mesh_rpr_scan_start_ext	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		const uint8_t	uuid[16],
		uint8_t	timeout,
		const uint8_t *	ad_types,
		size_t	ad_count
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Start extended scanning for unprovisioned devices.

Extended scanning supplements regular unprovisioned scanning, by allowing the Server to report additional data for a specific device. The Remote Provisioning Server will use active scanning to request a scan response from the unprovisioned device, if supported. If no UUID is provided, the Server will report a scan on its own OOB information and advertising data.

Use the ad_types array to specify which AD types to include in the scan report. Some AD types invoke special behavior:

• BT_DATA_NAME_COMPLETE Will report both the complete and the shortened name.
• BT_DATA_URI If the unprovisioned beacon contains a URI hash, the Server will extend the scanning to include packets other than the scan response, to look for URIs matching the URI hash. Only matching URIs will be reported.

The following AD types should not be used:

• BT_DATA_NAME_SHORTENED
• BT_DATA_UUID16_SOME
• BT_DATA_UUID32_SOME
• BT_DATA_UUID128_SOME

Additionally, each AD type should only occur once.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
uuid	Device UUID to start extended scanning for, or NULL to scan the remote server.
timeout	Scan timeout in seconds. Valid values from BT_MESH_RPR_EXT_SCAN_TIME_MIN to BT_MESH_RPR_EXT_SCAN_TIME_MAX. Ignored if UUID is NULL.
ad_types	List of AD types to include in the scan report. Must contain 1 to CONFIG_BT_MESH_RPR_AD_TYPES_MAX entries.
ad_count	Number of AD types in ad_types.

Returns

0 on success, or (negative) error code otherwise.

bt_mesh_rpr_scan_stop()

int bt_mesh_rpr_scan_stop	(	struct bt_mesh_rpr_cli *	cli,
		const struct bt_mesh_rpr_node *	srv,
		struct bt_mesh_rpr_scan_status *	status
	)

#include <zephyr/bluetooth/mesh/rpr_cli.h>

Stop any ongoing scanning on the Remote Provisioning Server.

Parameters

cli	Remote Provisioning Client.
srv	Remote Provisioning Server.
status	Scan status response buffer.

Returns

0 on success, or (negative) error code otherwise.