BBRAM Interface

BBRAM Interface. More...

Data Structures
struct	bbram_driver_api

Typedefs
typedef int(*	bbram_api_check_invalid_t) (const struct device *dev)
	API template to check if the BBRAM is invalid.
typedef int(*	bbram_api_check_standby_power_t) (const struct device *dev)
	API template to check for standby power failure.
typedef int(*	bbram_api_check_power_t) (const struct device *dev)
	API template to check for V CC1 power failure.
typedef int(*	bbram_api_get_size_t) (const struct device *dev, size_t *size)
	API template to check the size of the BBRAM.
typedef int(*	bbram_api_read_t) (const struct device *dev, size_t offset, size_t size, uint8_t *data)
	API template to read from BBRAM.
typedef int(*	bbram_api_write_t) (const struct device *dev, size_t offset, size_t size, const uint8_t *data)
	API template to write to BBRAM.

Functions
int	bbram_check_invalid (const struct device *dev)
	Check if BBRAM is invalid.
int	bbram_check_standby_power (const struct device *dev)
	Check for standby (Volt SBY) power failure.
int	bbram_check_power (const struct device *dev)
	Check for V CC1 power failure.
int	bbram_get_size (const struct device *dev, size_t *size)
	Get the size of the BBRAM (in bytes).
int	bbram_read (const struct device *dev, size_t offset, size_t size, uint8_t *data)
	Read bytes from BBRAM.
int	bbram_write (const struct device *dev, size_t offset, size_t size, const uint8_t *data)
	Write bytes to BBRAM.
int	bbram_emul_set_invalid (const struct device *dev, bool is_invalid)
	Set the emulated BBRAM driver's invalid state.
int	bbram_emul_set_standby_power_state (const struct device *dev, bool failure)
	Set the emulated BBRAM driver's standby power state.
int	bbram_emul_set_power_state (const struct device *dev, bool failure)
	Set the emulated BBRAM driver's power state.

Detailed Description

BBRAM Interface.

Typedef Documentation

bbram_api_check_invalid_t

bbram_api_check_invalid_t

#include <zephyr/drivers/bbram.h>

API template to check if the BBRAM is invalid.

See also

bbram_check_invalid

bbram_api_check_power_t

bbram_api_check_power_t

#include <zephyr/drivers/bbram.h>

API template to check for V CC1 power failure.

See also

bbram_check_power

bbram_api_check_standby_power_t

bbram_api_check_standby_power_t

#include <zephyr/drivers/bbram.h>

API template to check for standby power failure.

See also

bbram_check_standby_power

bbram_api_get_size_t

bbram_api_get_size_t

#include <zephyr/drivers/bbram.h>

API template to check the size of the BBRAM.

See also

bbram_get_size

bbram_api_read_t

bbram_api_read_t

#include <zephyr/drivers/bbram.h>

API template to read from BBRAM.

See also

bbram_read

bbram_api_write_t

bbram_api_write_t

#include <zephyr/drivers/bbram.h>

API template to write to BBRAM.

See also

bbram_write

Function Documentation

bbram_check_invalid()

int bbram_check_invalid

(

const struct device *

dev

)

#include <zephyr/drivers/bbram.h>

Check if BBRAM is invalid.

Check if "Invalid Battery-Backed RAM" status is set then reset the status bit. This may occur as a result to low voltage at the VBAT pin.

Parameters

[in]

dev

BBRAM device pointer.

Returns

0 if the Battery-Backed RAM data is valid, -EFAULT otherwise.

bbram_check_power()

int bbram_check_power

(

const struct device *

dev

)

#include <zephyr/drivers/bbram.h>

Check for V CC1 power failure.

This will return an error if the V CC1 power domain is turned on after it was off and reset the status bit.

Parameters

[in]

dev

BBRAM device pointer.

Returns

0 if the V CC1 power domain is in normal operation, -EFAULT otherwise.

bbram_check_standby_power()

int bbram_check_standby_power

(

const struct device *

dev

)

#include <zephyr/drivers/bbram.h>

Check for standby (Volt SBY) power failure.

Check if the V standby power domain is turned on after it was off then reset the status bit.

Parameters

[in]

dev

BBRAM device pointer.

Returns

0 if V SBY power domain is in normal operation.

bbram_emul_set_invalid()

int bbram_emul_set_invalid	(	const struct device *	dev,
		bool	is_invalid
	)

#include <zephyr/drivers/bbram.h>

Set the emulated BBRAM driver's invalid state.

Calling this will affect the emulated behavior of bbram_check_invalid().

Parameters

[in]	dev	The emulated device to modify
[in]	is_invalid	The new invalid state

Returns

0 on success, negative values on error.

bbram_emul_set_power_state()

int bbram_emul_set_power_state	(	const struct device *	dev,
		bool	failure
	)

#include <zephyr/drivers/bbram.h>

Set the emulated BBRAM driver's power state.

Calling this will affect the emulated behavior of bbram_check_power().

Parameters

[in]	dev	The emulated device to modify
[in]	failure	Whether or not a power failure should be emulated

Returns

0 on success, negative values on error.

bbram_emul_set_standby_power_state()

int bbram_emul_set_standby_power_state	(	const struct device *	dev,
		bool	failure
	)

#include <zephyr/drivers/bbram.h>

Set the emulated BBRAM driver's standby power state.

Calling this will affect the emulated behavior of bbram_check_standby_power().

Parameters

[in]	dev	The emulated device to modify
[in]	failure	Whether or not standby power failure should be emulated

Returns

0 on success, negative values on error.

bbram_get_size()

int bbram_get_size	(	const struct device *	dev,
		size_t *	size
	)

#include <zephyr/drivers/bbram.h>

Get the size of the BBRAM (in bytes).

Parameters

[in]	dev	BBRAM device pointer.
[out]	size	Pointer to write the size to.

Returns

0 for success, -EFAULT otherwise.

bbram_read()

int bbram_read	(	const struct device *	dev,
		size_t	offset,
		size_t	size,
		uint8_t *	data
	)

#include <zephyr/drivers/bbram.h>

Read bytes from BBRAM.

Parameters

[in]	dev	The BBRAM device pointer to read from.
[in]	offset	The offset into the RAM address to start reading from.
[in]	size	The number of bytes to read.
[out]	data	The buffer to load the data into.

Returns

0 on success, -EFAULT if the address range is out of bounds.

bbram_write()

int bbram_write	(	const struct device *	dev,
		size_t	offset,
		size_t	size,
		const uint8_t *	data
	)

#include <zephyr/drivers/bbram.h>

Write bytes to BBRAM.

Parameters

[in]	dev	The BBRAM device pointer to write to.
[in]	offset	The offset into the RAM address to start writing to.
[in]	size	The number of bytes to write.
[out]	data	Pointer to the start of data to write.

Returns

0 on success, -EFAULT if the address range is out of bounds.