Working with nRF54H Series

Note

All software for the nRF54H20 SoC is experimental, and hardware availability is restricted to the participants in the customer sampling program.

Zephyr and the nRF Connect SDK provide support and contain board definitions for developing on the following nRF54H Series device:

DK	PCA number	Build target
nRF54H20 DK	PCA10175	nrf54h20dk_nrf54h20_cpuapp nrf54h20dk_nrf54h20_cpurad nrf54h20dk_nrf54h20_cpuppr

Subpages:

• Getting started with the nRF54H20 DK
  • Minimum requirements
  • Installing the required software
  • Installing the nRF Connect SDK v2.7.0 and its toolchain
  • Installing the Terminal application
  • Installing nRF Util and its commands
  • nRF54H20 DK bring-up
  • Programming the sample
  • Reading the logs
  • Next steps
• Architecture of nRF54H20
  • nRF54H20 Domains
  • nRF54H20 Memory Layout
  • Interprocessor Communication in nRF54H20
  • nRF54H20 Boot Sequence
  • nRF54H20 lifecycle states
• Configuring the nRF54H20 DK
  • DTS file scheme
  • Customizing the DTS configuration
  • Generated HEX files
• Device Firmware Update using SUIT
  • Introduction to SUIT
  • SUIT manifest overview
  • Customize SUIT DFU quick start guide
  • How to customize the SUIT DFU process
  • How to fetch payloads
  • Firmware upgrade with external memory
  • SUIT components
  • Hierarchical manifests
  • DFU and bootloader comparison
• nRF54H20 debugging
  • Debug configuration
  • Debug configurations
  • Debugging single-core applications
  • Debugging multi-core applications
  • Using GDB as an external debugger
  • Debug logging
  • Debugging stack overflows
• Configuring your application for a custom PCB
  • Prepare your PCB
  • Prepare the configuration files for your custom board in the nRF Connect SDK
  • Configure, generate, and flash BICR
  • Verify the LCS and transition to RoT
  • Create or modify your application for your custom board