BSD Sockets

Overview
Secure Sockets
API Reference
- BSD Sockets
- TLS Credentials

Overview 

Zephyr offers an implementation of a subset of the BSD Sockets API (a part of the POSIX standard). This API allows to reuse existing programming experience and port existing simple networking applications to Zephyr.

Here are the key requirements and concepts which governed BSD Sockets compatible API implementation for Zephyr:

Has minimal overhead, similar to the requirement for other Zephyr subsystems.
Is namespaced by default, to avoid name conflicts with well-known names like close(), which may be part of libc or other POSIX compatibility libraries. If enabled by CONFIG_NET_SOCKETS_POSIX_NAMES, it will also expose native POSIX names.

BSD Sockets compatible API is enabled using CONFIG_NET_SOCKETS config option and implements the following operations: socket(), close(), recv(), recvfrom(), send(), sendto(), connect(), bind(), listen(), accept(), fcntl() (to set non-blocking mode), getsockopt(), setsockopt(), poll(), select(), getaddrinfo(), getnameinfo().

Based on the namespacing requirements above, these operations are by default exposed as functions with zsock_ prefix, e.g. zsock_socket() and zsock_close(). If the config option CONFIG_NET_SOCKETS_POSIX_NAMES is defined, all the functions will be also exposed as aliases without the prefix. This includes the functions like close() and fcntl() (which may conflict with functions in libc or other libraries, for example, with the filesystem libraries).

Another entailment of the design requirements above is that the Zephyr API aggressively employs the short-read/short-write property of the POSIX API whenever possible (to minimize complexity and overheads). POSIX allows for calls like recv() and send() to actually process (receive or send) less data than requested by the user (on SOCK_STREAM type sockets). For example, a call recv(sock, 1000, 0) may return 100, meaning that only 100 bytes were read (short read), and the application needs to retry call(s) to receive the remaining 900 bytes.

The BSD Sockets API uses file descriptors to represent sockets. File descriptors are small integers, consecutively assigned from zero, shared among sockets, files, special devices (like stdin/stdout), etc. Internally, there is a table mapping file descriptors to internal object pointers. The file descriptor table is used by the BSD Sockets API even if the rest of the POSIX subsystem (filesystem, stdin/stdout) is not enabled.

Secure Sockets 

Zephyr provides an extension of standard POSIX socket API, allowing to create and configure sockets with TLS protocol types, facilitating secure communication. Secure functions for the implementation are provided by mbedTLS library. Secure sockets implementation allows use of both TLS and DTLS protocols with standard socket calls. See net_ip_protocol_secure type for supported secure protocol versions.

To enable secure sockets, set the CONFIG_NET_SOCKETS_SOCKOPT_TLS option. To enable DTLS support, use CONFIG_NET_SOCKETS_ENABLE_DTLS option.

TLS credentials subsystem 

TLS credentials must be registered in the system before they can be used with secure sockets. See tls_credential_add() for more information.

When a specific TLS credential is registered in the system, it is assigned with numeric value of type sec_tag_t, called a tag. This value can be used later on to reference the credential during secure socket configuration with socket options.

The following TLS credential types can be registered in the system:

TLS_CREDENTIAL_CA_CERTIFICATE
TLS_CREDENTIAL_SERVER_CERTIFICATE
TLS_CREDENTIAL_PRIVATE_KEY
TLS_CREDENTIAL_PSK
TLS_CREDENTIAL_PSK_ID

An example registration of CA certificate (provided in ca_certificate array) looks like this:

ret = tls_credential_add(CA_CERTIFICATE_TAG, TLS_CREDENTIAL_CA_CERTIFICATE,
                         ca_certificate, sizeof(ca_certificate));

By default certificates in DER format are supported. PEM support can be enabled in mbedTLS settings.

Secure Socket Creation 

A secure socket can be created by specifying secure protocol type, for instance:

sock = socket(AF_INET, SOCK_STREAM, IPPROTO_TLS_1_2);

Once created, it can be configured with socket options. For instance, the CA certificate and hostname can be set:

sec_tag_t sec_tag_opt[] = {
        CA_CERTIFICATE_TAG,
};

ret = setsockopt(sock, SOL_TLS, TLS_SEC_TAG_LIST,
                 sec_tag_opt, sizeof(sec_tag_opt));

char host[] = "google.com";

ret = setsockopt(sock, SOL_TLS, TLS_HOSTNAME, host, sizeof(host) - 1);

Once configured, socket can be used just like a regular TCP socket.

Several samples in Zephyr use secure sockets for communication. For a sample use see e.g. echo-server sample application or HTTP GET sample application.

Secure Sockets options 

Secure sockets offer the following options for socket management:

group secure_sockets_options

Defines

TLS_SEC_TAG_LIST: Socket option to select TLS credentials to use. It accepts and returns an array of sec_tag_t that indicate which TLS credentials should be used with specific socket.

TLS_HOSTNAME: Write-only socket option to set hostname. It accepts a string containing the hostname (may be NULL to disable hostname verification). By default, hostname check is enforced for TLS clients.

TLS_CIPHERSUITE_LIST: Socket option to select ciphersuites to use. It accepts and returns an array of integers with IANA assigned ciphersuite identifiers. If not set, socket will allow all ciphersuites available in the system (mebdTLS default behavior).

TLS_CIPHERSUITE_USED: Read-only socket option to read a ciphersuite chosen during TLS handshake. It returns an integer containing an IANA assigned ciphersuite identifier of chosen ciphersuite.

TLS_PEER_VERIFY

Write-only socket option to set peer verification level for TLS connection. This option accepts an integer with a peer verification level, compatible with mbedTLS values:

0 - none
1 - optional
2 - required

If not set, socket will use mbedTLS defaults (none for servers, required for clients).

TLS_DTLS_ROLE

Write-only socket option to set role for DTLS connection. This option is irrelevant for TLS connections, as for them role is selected based on connect()/listen() usage. By default, DTLS will assume client role. This option accepts an integer with a TLS role, compatible with mbedTLS values:

0 - client
1 - server

TLS_ALPN_LIST: Socket option for setting the supported Application Layer Protocols. It accepts and returns a const char array of NULL terminated strings representing the supported application layer protocols listed during the TLS handshake.

TLS_DTLS_HANDSHAKE_TIMEOUT_MIN: Socket option to set DTLS handshake timeout. The timeout starts at min, and upon retransmission the timeout is doubled util max is reached. Min and max arguments are separate options. The time unit is ms.

TLS_DTLS_HANDSHAKE_TIMEOUT_MAX

TLS_CERT_NOCOPY: Socket option for preventing certificates from being copied to the mbedTLS heap if possible. The option is only effective for DER certificates and is ignored for PEM certificates.

API Reference 

BSD Sockets 

group bsd_sockets

BSD Sockets compatible API.

Defines

ZSOCK_POLLIN: zsock_poll: Poll for readability

ZSOCK_POLLPRI: zsock_poll: Compatibility value, ignored

ZSOCK_POLLOUT: zsock_poll: Poll for writability

ZSOCK_POLLERR: zsock_poll: Poll results in error condition (output value only)

ZSOCK_POLLHUP: zsock_poll: Poll detected closed connection (output value only)

ZSOCK_POLLNVAL: zsock_poll: Invalid socket (output value only)

ZSOCK_MSG_PEEK: zsock_recv: Read data without removing it from socket input queue

ZSOCK_MSG_TRUNC: zsock_recv: return the real length of the datagram, even when it was longer than the passed buffer

ZSOCK_MSG_DONTWAIT: zsock_recv/zsock_send: Override operation to non-blocking

ZSOCK_MSG_WAITALL: zsock_recv: block until the full amount of data can be returned

ZSOCK_SHUT_RD: zsock_shutdown: Shut down for reading

ZSOCK_SHUT_WR: zsock_shutdown: Shut down for writing

ZSOCK_SHUT_RDWR: zsock_shutdown: Shut down for both reading and writing

SOL_TLS: Protocol level for TLS. Here, the same socket protocol level for TLS as in Linux was used.

TLS_PEER_VERIFY_NONE: Peer verification disabled.

TLS_PEER_VERIFY_OPTIONAL: Peer verification optional.

TLS_PEER_VERIFY_REQUIRED: Peer verification required.

TLS_DTLS_ROLE_CLIENT: Client role in a DTLS session.

TLS_DTLS_ROLE_SERVER: Server role in a DTLS session.

TLS_CERT_NOCOPY_NONE: Cert duplicated in heap

TLS_CERT_NOCOPY_OPTIONAL: Cert not copied in heap if DER

AI_PASSIVE: Address for bind() (vs for connect())

AI_CANONNAME: Fill in ai_canonname

AI_NUMERICHOST: Assume host address is in numeric notation, don’t DNS lookup

AI_V4MAPPED: May return IPv4 mapped address for IPv6

AI_ALL: May return both native IPv6 and mapped IPv4 address for IPv6

AI_ADDRCONFIG: IPv4/IPv6 support depends on local system config

AI_NUMERICSERV: Assume service (port) is numeric

NI_NUMERICHOST: zsock_getnameinfo(): Resolve to numeric address.

NI_NUMERICSERV: zsock_getnameinfo(): Resolve to numeric port number.

NI_NOFQDN: zsock_getnameinfo(): Return only hostname instead of FQDN

NI_NAMEREQD: zsock_getnameinfo(): Dummy option for compatibility

NI_DGRAM: zsock_getnameinfo(): Dummy option for compatibility

NI_MAXHOST: zsock_getnameinfo(): Max supported hostname length

IFNAMSIZ

SOL_SOCKET: sockopt: Socket-level option

SO_DEBUG: sockopt: Recording debugging information (ignored, for compatibility)

SO_REUSEADDR: sockopt: address reuse (ignored, for compatibility)

SO_TYPE: sockopt: Type of the socket

SO_ERROR: sockopt: Async error (ignored, for compatibility)

SO_DONTROUTE: sockopt: Bypass normal routing and send directly to host (ignored, for compatibility)

SO_BROADCAST: sockopt: Transmission of broadcast messages is supported (ignored, for compatibility)

SO_SNDBUF: sockopt: Size of socket socket send buffer (ignored, for compatibility)

SO_KEEPALIVE: sockopt: Enable sending keep-alive messages on connections (ignored, for compatibility)

SO_OOBINLINE: sockopt: Place out-of-band data into receive stream (ignored, for compatibility)

SO_REUSEPORT: sockopt: Allow multiple sockets to reuse a single port (ignored, for compatibility)

SO_RCVTIMEO: sockopt: Receive timeout Applies to receive functions like recv(), but not to connect()

SO_SNDTIMEO: sockopt: Send timeout

SO_BINDTODEVICE: sockopt: Bind a socket to an interface

SO_ACCEPTCONN: sockopt: Socket accepts incoming connections (ignored, for compatibility)

SO_TIMESTAMPING: sockopt: Timestamp TX packets

SO_PROTOCOL: sockopt: Protocol used with the socket

SO_DOMAIN: sockopt: Domain used with SOCKET (ignored, for compatibility)

TCP_NODELAY: End Socket options for SOL_SOCKET level sockopt: Disable TCP buffering (ignored, for compatibility)

IPV6_V6ONLY: sockopt: Don’t support IPv4 access (ignored, for compatibility)

SO_PRIORITY: sockopt: Socket priority

SO_TXTIME: sockopt: Socket TX time (when the data should be sent)

SCM_TXTIME

SO_SOCKS5: sockopt: Enable SOCKS5 for Socket

ZSOCK_FD_SETSIZE: Number of file descriptors which can be added to zsock_fd_set

zsock_timeval

Typedefs

typedef struct zsock_fd_set zsock_fd_set

Functions

void *zsock_get_context_object(int sock)

Obtain a file descriptor’s associated net context.

With CONFIG_USERSPACE enabled, the kernel’s object permission system must apply to socket file descriptors. When a socket is opened, by default only the caller has permission, access by other threads will fail unless they have been specifically granted permission.

This is achieved by tagging data structure definitions that implement the underlying object associated with a network socket file descriptor with ‘__net_socket`. All pointers to instances of these will be known to the kernel as kernel objects with type K_OBJ_NET_SOCKET.

This API is intended for threads that need to grant access to the object associated with a particular file descriptor to another thread. The returned pointer represents the underlying K_OBJ_NET_SOCKET and may be passed to APIs like k_object_access_grant().

In a system like Linux which has the notion of threads running in processes in a shared virtual address space, this sort of management is unnecessary as the scope of file descriptors is implemented at the process level.

However in Zephyr the file descriptor scope is global, and MPU-based systems are not able to implement a process-like model due to the lack of memory virtualization hardware. They use discrete object permissions and memory domains instead to define thread access scope.

User threads will have no direct access to the returned object and will fault if they try to access its memory; the pointer can only be used to make permission assignment calls, which follow exactly the rules for other kernel objects like device drivers and IPC.

Parameters

sock – file descriptor

Returns

pointer to associated network socket object, or NULL if the file descriptor wasn’t valid or the caller had no access permission

int zsock_socket(int family, int type, int proto)

Create a network socket.

See POSIX.1-2017 article for normative description. This function is also exposed as socket() if CONFIG_NET_SOCKETS_POSIX_NAMES is defined.

If CONFIG_USERSPACE is enabled, the caller will be granted access to the context object associated with the returned file descriptor.

TLS Credentials 

group tls_credentials

TLS credentials management.

Typedefs

typedef int sec_tag_t

Secure tag, a reference to TLS credential

Secure tag can be used to reference credential after it was registered in the system.

Note

Some TLS credentials come in pairs:

TLS_CREDENTIAL_SERVER_CERTIFICATE with TLS_CREDENTIAL_PRIVATE_KEY,
TLS_CREDENTIAL_PSK with TLS_CREDENTIAL_PSK_ID. Such pairs of credentials must be assigned the same secure tag to be correctly handled in the system.

Enums

enum tls_credential_type

TLS credential types

Values:

enumerator TLS_CREDENTIAL_NONE: Unspecified credential.

enumerator TLS_CREDENTIAL_CA_CERTIFICATE: A trusted CA certificate. Use this to authenticate remote servers. Used with certificate-based ciphersuites.

enumerator TLS_CREDENTIAL_SERVER_CERTIFICATE: A public server certificate. Use this to register your own server certificate. Should be registered together with a corresponding private key. Used with certificate-based ciphersuites.

enumerator TLS_CREDENTIAL_PRIVATE_KEY: Private key. Should be registered together with a corresponding public certificate. Used with certificate-based ciphersuites.

enumerator TLS_CREDENTIAL_PSK: Pre-shared key. Should be registered together with a corresponding PSK identity. Used with PSK-based ciphersuites.

enumerator TLS_CREDENTIAL_PSK_ID: Pre-shared key identity. Should be registered together with a corresponding PSK. Used with PSK-based ciphersuites.

Functions

int tls_credential_add(sec_tag_t tag, enum tls_credential_type type, const void *cred, size_t credlen)

Add a TLS credential.

This function adds a TLS credential, that can be used by TLS/DTLS for authentication.

Parameters

tag – A security tag that credential will be referenced with.
type – A TLS/DTLS credential type.
cred – A TLS/DTLS credential.
credlen – A TLS/DTLS credential length.

Return values

0 – TLS credential successfully added.
-EACCES – Access to the TLS credential subsystem was denied.
-ENOMEM – Not enough memory to add new TLS credential.
-EEXIST – TLS credential of specific tag and type already exists.

int tls_credential_get(sec_tag_t tag, enum tls_credential_type type, void *cred, size_t *credlen)

Get a TLS credential.

This function gets an already registered TLS credential, referenced by tag secure tag of type.

Parameters

tag – A security tag of requested credential.
type – A TLS/DTLS credential type of requested credential.
cred – A buffer for TLS/DTLS credential.
credlen – A buffer size on input. TLS/DTLS credential length on output.

Return values

0 – TLS credential successfully obtained.
-EACCES – Access to the TLS credential subsystem was denied.
-ENOENT – Requested TLS credential was not found.
-EFBIG – Requested TLS credential does not fit in the buffer provided.

int tls_credential_delete(sec_tag_t tag, enum tls_credential_type type)

Delete a TLS credential.

This function removes a TLS credential, referenced by tag secure tag of type.

Parameters

tag – A security tag corresponding to removed credential.
type – A TLS/DTLS credential type of removed credential.

Return values

0 – TLS credential successfully deleted.
-EACCES – Access to the TLS credential subsystem was denied.
-ENOENT – Requested TLS credential was not found.