WAVESHARE e-Paper Raw Panel Shield

Overview

The WAVESHARE e-Paper Raw Panel Shield is a universal driver shield. The shield can be used to drive various Electrophoretic (electronic ink) Display (EPD) with a SPI interface. This shield includes a 23LC1024 1Mb SPI Serial SRAM that is not currently supported by the Zephyr RTOS.

More information about the shield can be found at the Universal e-Paper Raw Panel Driver Shield website 1.

Pins Assignment of the e-Paper Shield

Shield Connector Pin

Function

D5

RAM CSn

RAM Chip Select

D6

SD CSn

EPD SD Card Chip Select

D7

EPD BUSY

EPD Busy Output

D8

EPD RESETn

EPD Reset Input

D9

EPD DC

EPD Data/Command Input

D10

EPD CSn

EPD Chip Select Input

D11

SPI MOSI

Serial Data Input

D12

SPI MISO

Serial Data Out

D13

SPI SCK

Serial Clock Input

Current supported displays

Display

Ribbon Cable Label

Controller / Driver

Shield Designation

Good Display GDEH0213B1

HINK-E0213

SSD1673 / ssd16xx

waveshare_epaper_gdeh0213b1

Good Display GDEH0213B72

HINK-E0213A22

IL3897 / ssd16xx

waveshare_epaper_gdeh0213b72

Good Display GDEH029A1

E029A01

IL3820 / ssd16xx

waveshare_epaper_gdeh029a1

Good Display GDEW075T7

WFT0583CZ61

GD7965 / gd7965

waveshare_epaper_gdew075t7

Good Display GDEH0154D67

HINK-E0154A07

SSD1681 / ssd16xx

waveshare_epaper_gdeh0154a07

Good Display GDEW042T2

WFT0420CZ15

UC8176 / gd7965

waveshare_epaper_gdew042t2

Requirements

This shield can only be used with a board that provides a configuration for Arduino connectors and defines node aliases for SPI and GPIO interfaces (see Shields for more details).

Programming

Correct shield designation (see the table above) for your display must be entered when you invoke west build. For example:

# From the root of the zephyr repository
west build -b nrf52840dk_nrf52840 samples/subsys/display/lvgl -- -DSHIELD=waveshare_epaper_gdeh0213b1

References

1

https://www.waveshare.com/e-paper-shield.htm