TF-M Hello World

The TF-M Hello World sample is based on Hello World that demonstrates adding Trusted Firmware-M (TF-M) to an application.

Requirements

The sample supports the following development kits:

Hardware platforms

PCA

Board name

Build target

nRF5340 DK

PCA10095

nrf5340dk_nrf5340

nrf5340dk_nrf5340_cpuapp_ns

nRF9160 DK

PCA10090

nrf9160dk_nrf9160

nrf9160dk_nrf9160_ns

Overview

This sample uses the Platform Security Architecture (PSA) API to calculate a SHA-256 digest and the TF-M platform read service to read two FICR registers. The PSA API call is handled by the TF-M secure firmware.

Building and running

This sample can be found under samples/tfm/tfm_hello_world in the nRF Connect SDK folder structure.

See Building and programming an application for information about how to build and program the application.

Testing

After programming the sample, the following output is displayed in the console:

Hello World! nrf5340dk_nrf5340_cpuapp
Generating random number
0x8aefe6b7473f2e2c170bbd3eb39aa7679bc1e7693a11030b0a4c1c8ba41eb457
Reading some secure memory that NS is allowed to read
FICR->INFO.PART: 0x00005340
FICR->INFO.VARIANT: 0x514b4141
Hashing 'Hello World! nrf5340dk_nrf5340_cpuapp'
SHA256 digest:
0x12f0c84eecba8497cc0bec1ebc5a785df2ae027a2545921d6cdc0920c5aaefd7
Configuring MCU selection for LFXO

Dependencies

This sample uses the TF-M module that can be found in the following location in the nRF Connect SDK folder structure:

  • modules/tee/tfm/

This sample uses the following libraries: