FTDI VM800C Embedded Video Engine Board
Overview
The VM800C is a development module for FTDI’s FT800, which is used to develop and demonstrate the functionality of the FT800 Embedded Video Engine, EVE. This module behaves as an SPI slave, and requires a SPI Master for proper microcontroller interfacing and system integration.
Pins Assignment of the Arduino Shield Modules
Pin |
Name |
Function |
|---|---|---|
D0 |
||
D1 |
||
D2 |
INT# |
GPIO - Interrupt |
D3 |
||
D4 |
||
D5 |
||
D6 |
||
D7 |
||
D8 |
||
D9 |
||
D10 |
CS# |
SPI Chip Select |
D11 |
MOSI |
SPI Master Out / Slave In |
D12 |
MISO |
SPI Master In / Slave Out |
D13 |
SCLK |
SPI Clock |
D14 |
||
D15 |
||
GND |
||
3.3V |
POWER +3.3V |
|
5V |
POWER +5.0V or +3.3V |
Requirements
This shield requires a board which provides a configuration that allows an SPI interface and an interrupt signal. (see Shields for more details).
Sample usage
You can try use FT800 with the Zephyr FT800 sample, which provides out-of-the-box configuration for FT800 Embedded Video engine. See FT800 for details.
Build and Programming
Set -DSHIELD=<shield designator> when you invoke west build.
west build -b nrf52840dk_nrf52840 samples/drivers/misc/ft800 -- -DSHIELD=ftdi_vm800c
west flash