BeagleV Starlight JH7100

Overview

The BeagleV Starlight is an 64-bit open-source RISC-V development board with a StarFive JH7100 SoC.

Programming and debugging

Building

Applications for the beaglev_starlight_jh7100 board configuration can be built as usual (see Building an Application) using the corresponding board name:

west build -b beaglev_starlight_jh7100

The bootloader expects size information at the start of the binary file, so the bin file needs to be processed first to include that information. Download the helper script from starfive-tech github repo here

./fsz.sh build/zephyr/zephyr.bin

This will create a new file build/zephyr/zephyr.bin.out that can be flashed.

Flashing

Note

The following steps use minicom for serial communication, feel free to use any other serial terminal that supports xmodem based file transfers.

BeagleV Starlight uses uart for flashing. Refer to BeagleV Getting Started to connect your serial-to-usb converter. Now power on the board and using minicom access board’s serial.
```
minicom -D /dev/ttyUSB0 -b 115200
```

Press any key to stop the boot sequence. This will output a menu

***************************************************
*************** FLASH PROGRAMMING *****************
***************************************************

0:update uboot
1:quit
select the function:

Select 0 to flash a new image.
Press Ctrl+A and then press s to enter upload mode
Select xmodem and press Enter
Select Goto from the bottom tab menu and press Enter
Enter the directory path and press Enter
Select zephyr.bin.out by navigating using arrow keys, press Space and press Enter
Once uploaded hit any key to continue and reset the board to boot the zephyr binary

References

Update bootloader, ddr init boot, u-boot and Recover bootloader