CONFIG_PSA_WANT_ECC_MONTGOMERY_448
PSA ECC Curve448 support
PSA ECC Curve448 support
PSA ECC Curve448 support
PSA ECC Curve448 support
Type: bool
Direct dependencies
(PSA_HAS_ECC_SUPPORT
&& MBEDTLS
) || BUILD_WITH_TFM
|| (PSA_HAS_ECC_SUPPORT
&& MBEDTLS
) || (PSA_HAS_ECC_SUPPORT
&& MBEDTLS_PSA_CRYPTO_C
&& NRF_SECURITY
) || (PSA_HAS_ECC_SUPPORT
&& MBEDTLS
&& 0)
(Includes any dependencies from ifs and menus.)
Defaults
n
n
n
n
n
Symbols that select this symbol
Kconfig definitions
At <Zephyr>/modules/mbedtls/Kconfig.psa:373
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:33
→ <Zephyr>/modules/Kconfig:6
→ <nRF>/doc/_build/kconfig/Kconfig.modules:14
→ <Zephyr>/modules/mbedtls/Kconfig:176
Menu path: (Top) → Modules → mbedtls (/home/runner/work/sdk-nrf/sdk-nrf/ncs/mbedtls) → mbed TLS Support → PSA Assymetric support → Elliptic Curve type support
config PSA_WANT_ECC_MONTGOMERY_448
bool "PSA ECC Curve448 support"
default n
depends on PSA_HAS_ECC_SUPPORT && MBEDTLS
At <nRF>/modules/trusted-firmware-m/Kconfig.psa.defconfig:134
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:33
→ <Zephyr>/modules/Kconfig:6
→ <nRF>/doc/_build/kconfig/Kconfig.modules:20
→ <nRF>/modules/trusted-firmware-m/Kconfig:109
Menu path: (Top) → Modules → trusted-firmware-m (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/tee/tf-m/trusted-firmware-m)
config PSA_WANT_ECC_MONTGOMERY_448
bool
default n
depends on BUILD_WITH_TFM
At <Zephyr>/modules/mbedtls/Kconfig.psa:373
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:33
→ <Zephyr>/modules/Kconfig:6
→ <nRF>/doc/_build/kconfig/Kconfig.modules:68
→ <Zephyr>/modules/mbedtls/Kconfig:176
Menu path: (Top) → Modules → mbedtls (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/crypto/mbedtls) → mbed TLS Support → PSA Assymetric support → Elliptic Curve type support
config PSA_WANT_ECC_MONTGOMERY_448
bool "PSA ECC Curve448 support"
default n
depends on PSA_HAS_ECC_SUPPORT && MBEDTLS
At <Zephyr>/modules/mbedtls/Kconfig.psa:373
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:33
→ <Zephyr>/modules/Kconfig:6
→ <nRF>/doc/_build/kconfig/Kconfig.modules:92
→ <nrfxlib>/Kconfig.nrfxlib:13
→ <nrfxlib>/nrf_security/Kconfig:108
→ <nrfxlib>/nrf_security/Kconfig.psa:20
Menu path: (Top) → Modules → nrfxlib (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrfxlib) → Nordic nrfxlib → nrf_security module → Enable PSA crypto APIs → PSA Assymetric support → Elliptic Curve type support
config PSA_WANT_ECC_MONTGOMERY_448
bool "PSA ECC Curve448 support"
default n
depends on PSA_HAS_ECC_SUPPORT && MBEDTLS_PSA_CRYPTO_C && NRF_SECURITY
At <Zephyr>/modules/mbedtls/Kconfig.psa:373
Included via <Zephyr>/Kconfig:8
→ <Zephyr>/Kconfig.zephyr:33
→ <Zephyr>/modules/Kconfig:80
→ <Zephyr>/modules/mbedtls/Kconfig:176
Menu path: (Top) → Modules → mbed TLS Support → PSA Assymetric support → Elliptic Curve type support
config PSA_WANT_ECC_MONTGOMERY_448
bool "PSA ECC Curve448 support"
default n
depends on PSA_HAS_ECC_SUPPORT && MBEDTLS && 0
(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)