CONFIG_MBEDTLS_ECP_ALL_ENABLED

Enable all available elliptic curves

Type: bool

Direct dependencies

(!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = “config-tls-generic.h” && MBEDTLS) || (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = “config-tls-generic.h” && MBEDTLS) || !MBEDTLS_BUILTIN || (!(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = “config-tls-generic.h” && MBEDTLS && 0)

(Includes any dependencies from ifs and menus.)

Defaults

No defaults. Implicitly defaults to n.

Symbols selected by this symbol

Kconfig definitions

At <Zephyr>/modules/mbedtls/Kconfig.tls-generic:138

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:6 → <nRF>/doc/_build/kconfig/Kconfig.modules:14 → <Zephyr>/modules/mbedtls/Kconfig:67

Menu path: (Top) → Modules → mbedtls (/home/runner/work/sdk-nrf/sdk-nrf/ncs/mbedtls) → mbed TLS Support → TLS configuration → Ciphersuite configuration

config MBEDTLS_ECP_ALL_ENABLED
    bool "Enable all available elliptic curves"
    select MBEDTLS_ECP_DP_SECP192R1_ENABLED
    select MBEDTLS_ECP_DP_SECP192R1_ENABLED
    select MBEDTLS_ECP_DP_SECP224R1_ENABLED
    select MBEDTLS_ECP_DP_SECP256R1_ENABLED
    select MBEDTLS_ECP_DP_SECP384R1_ENABLED
    select MBEDTLS_ECP_DP_SECP521R1_ENABLED
    select MBEDTLS_ECP_DP_SECP192K1_ENABLED
    select MBEDTLS_ECP_DP_SECP224K1_ENABLED
    select MBEDTLS_ECP_DP_SECP256K1_ENABLED
    select MBEDTLS_ECP_DP_BP256R1_ENABLED
    select MBEDTLS_ECP_DP_BP384R1_ENABLED
    select MBEDTLS_ECP_DP_BP512R1_ENABLED
    select MBEDTLS_ECP_DP_CURVE25519_ENABLED
    select MBEDTLS_ECP_DP_CURVE448_ENABLED
    select MBEDTLS_ECP_NIST_OPTIM
    depends on !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS

At <Zephyr>/modules/mbedtls/Kconfig.tls-generic:138

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:6 → <nRF>/doc/_build/kconfig/Kconfig.modules:68 → <Zephyr>/modules/mbedtls/Kconfig:67

Menu path: (Top) → Modules → mbedtls (/home/runner/work/sdk-nrf/sdk-nrf/ncs/modules/crypto/mbedtls) → mbed TLS Support → TLS configuration → Ciphersuite configuration

config MBEDTLS_ECP_ALL_ENABLED
    bool "Enable all available elliptic curves"
    select MBEDTLS_ECP_DP_SECP192R1_ENABLED
    select MBEDTLS_ECP_DP_SECP192R1_ENABLED
    select MBEDTLS_ECP_DP_SECP224R1_ENABLED
    select MBEDTLS_ECP_DP_SECP256R1_ENABLED
    select MBEDTLS_ECP_DP_SECP384R1_ENABLED
    select MBEDTLS_ECP_DP_SECP521R1_ENABLED
    select MBEDTLS_ECP_DP_SECP192K1_ENABLED
    select MBEDTLS_ECP_DP_SECP224K1_ENABLED
    select MBEDTLS_ECP_DP_SECP256K1_ENABLED
    select MBEDTLS_ECP_DP_BP256R1_ENABLED
    select MBEDTLS_ECP_DP_BP384R1_ENABLED
    select MBEDTLS_ECP_DP_BP512R1_ENABLED
    select MBEDTLS_ECP_DP_CURVE25519_ENABLED
    select MBEDTLS_ECP_DP_CURVE448_ENABLED
    select MBEDTLS_ECP_NIST_OPTIM
    depends on !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS

At <nrfxlib>/nrf_security/Kconfig:147

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:6 → <nRF>/doc/_build/kconfig/Kconfig.modules:92 → <nrfxlib>/Kconfig.nrfxlib:13

Menu path: (Top) → Modules → nrfxlib (/home/runner/work/sdk-nrf/sdk-nrf/ncs/nrfxlib) → Nordic nrfxlib → nrf_security module → Zephyr legacy configurations

config MBEDTLS_ECP_ALL_ENABLED
    bool "Enable all available elliptic curves"
    select PSA_WANT_ECC_SECP_R1_192
    select PSA_WANT_ECC_SECP_R1_224
    select PSA_WANT_ECC_SECP_R1_256
    select PSA_WANT_ECC_SECP_R1_384
    select PSA_WANT_ECC_SECP_R1_521
    select PSA_WANT_ECC_SECP_K1_192
    select PSA_WANT_ECC_SECP_K1_224
    select PSA_WANT_ECC_SECP_K1_256
    select PSA_WANT_ECC_BRAINPOOL_P_R1_256
    select PSA_WANT_ECC_BRAINPOOL_P_R1_384
    select PSA_WANT_ECC_BRAINPOOL_P_R1_512
    select PSA_WANT_ECC_MONTGOMERY_255
    select PSA_WANT_ECC_MONTGOMERY_448
    depends on !MBEDTLS_BUILTIN

At <Zephyr>/modules/mbedtls/Kconfig.tls-generic:138

Included via <Zephyr>/Kconfig:8 → <Zephyr>/Kconfig.zephyr:33 → <Zephyr>/modules/Kconfig:80 → <Zephyr>/modules/mbedtls/Kconfig:67

Menu path: (Top) → Modules → mbed TLS Support → TLS configuration → Ciphersuite configuration

config MBEDTLS_ECP_ALL_ENABLED
    bool "Enable all available elliptic curves"
    select MBEDTLS_ECP_DP_SECP192R1_ENABLED
    select MBEDTLS_ECP_DP_SECP192R1_ENABLED
    select MBEDTLS_ECP_DP_SECP224R1_ENABLED
    select MBEDTLS_ECP_DP_SECP256R1_ENABLED
    select MBEDTLS_ECP_DP_SECP384R1_ENABLED
    select MBEDTLS_ECP_DP_SECP521R1_ENABLED
    select MBEDTLS_ECP_DP_SECP192K1_ENABLED
    select MBEDTLS_ECP_DP_SECP224K1_ENABLED
    select MBEDTLS_ECP_DP_SECP256K1_ENABLED
    select MBEDTLS_ECP_DP_BP256R1_ENABLED
    select MBEDTLS_ECP_DP_BP384R1_ENABLED
    select MBEDTLS_ECP_DP_BP512R1_ENABLED
    select MBEDTLS_ECP_DP_CURVE25519_ENABLED
    select MBEDTLS_ECP_DP_CURVE448_ENABLED
    select MBEDTLS_ECP_NIST_OPTIM
    depends on !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && !(NRF_SECURITY || NORDIC_SECURITY_BACKEND) && MBEDTLS_BUILTIN && MBEDTLS_CFG_FILE = "config-tls-generic.h" && MBEDTLS && 0

(The ‘depends on’ condition includes propagated dependencies from ifs and menus.)