ANT Error Return

Macros
#define	NRF_ANT_ERROR_OFFSET   0x4000
	ANT Error Return parameter definitions.
#define	NRF_ANT_ERROR_CHANNEL_IN_WRONG_STATE   NRF_ANT_ERROR_OFFSET + CHANNEL_IN_WRONG_STATE
	Response on attempt to perform an action from the wrong channel state.
#define	NRF_ANT_ERROR_CHANNEL_NOT_OPENED   NRF_ANT_ERROR_OFFSET + CHANNEL_NOT_OPENED
	Response on attempt to communicate on a channel that is not open.
#define	NRF_ANT_ERROR_CHANNEL_ID_NOT_SET   NRF_ANT_ERROR_OFFSET + CHANNEL_ID_NOT_SET
	Response on attempt to open a channel without setting the channel ID.
#define	NRF_ANT_ERROR_CLOSE_ALL_CHANNELS   NRF_ANT_ERROR_OFFSET + CLOSE_ALL_CHANNELS
	Response when attempting to start scanning mode, when channels are still open.
#define	NRF_ANT_ERROR_TRANSFER_IN_PROGRESS   NRF_ANT_ERROR_OFFSET + TRANSFER_IN_PROGRESS
	Response on attempt to communicate on a channel with a TX transfer in progress.
#define	NRF_ANT_ERROR_TRANSFER_SEQUENCE_NUMBER_ERROR   NRF_ANT_ERROR_OFFSET + TRANSFER_SEQUENCE_NUMBER_ERROR
	Response when sequence number of burst message or burst data segment is out of order.
#define	NRF_ANT_ERROR_TRANSFER_IN_ERROR   NRF_ANT_ERROR_OFFSET + TRANSFER_IN_ERROR
	Response when transfer error has occured on supplied burst message or burst data segment.
#define	NRF_ANT_ERROR_TRANSFER_BUSY   NRF_ANT_ERROR_OFFSET + TRANSFER_BUSY
	Response when transfer is busy and cannot process supplied burst message or burst data segment.
#define	NRF_ANT_ERROR_MESSAGE_SIZE_EXCEEDS_LIMIT   NRF_ANT_ERROR_OFFSET + MESSAGE_SIZE_EXCEEDS_LIMIT
	Response if a data message is provided that is too large.
#define	NRF_ANT_ERROR_INVALID_MESSAGE   NRF_ANT_ERROR_OFFSET + INVALID_MESSAGE
	Response when the message has an invalid parameter.
#define	NRF_ANT_ERROR_INVALID_NETWORK_NUMBER   NRF_ANT_ERROR_OFFSET + INVALID_NETWORK_NUMBER
	Response when an invalid network number is provided.
#define	NRF_ANT_ERROR_INVALID_LIST_ID   NRF_ANT_ERROR_OFFSET + INVALID_LIST_ID
	Response when the provided list ID or size exceeds the limit.
#define	NRF_ANT_ERROR_INVALID_SCAN_TX_CHANNEL   NRF_ANT_ERROR_OFFSET + INVALID_SCAN_TX_CHANNEL
	Response when attempting to transmit on channel 0 when in scan mode.
#define	NRF_ANT_ERROR_INVALID_PARAMETER_PROVIDED   NRF_ANT_ERROR_OFFSET + INVALID_PARAMETER_PROVIDED
	Response when an invalid parameter is specified in a configuration message.

Detailed Description