Clock driver

Driver for managing the low-frequency clock (LFCLK) and the high-frequency clock (HFCLK). More...

Data Structures
struct	nrf_drv_clock_config_t
	Struct for Clock initialization. Thise parameters are used when SoftDevice is not present and low-frequency RC oscillator is selected. More...

Macros
#define	NRF_DRV_CLOCK_DEAFULT_CONFIG
	Clock default configuration. More...

Enumerations
enum	nrf_drv_clock_lf_cal_interval_t {   RC_250MS_CALIBRATION_INTERVAL = 1,   RC_500MS_CALIBRATION_INTERVAL = 2,   RC_1000MS_CALIBRATION_INTERVAL = 4,   RC_2000MS_CALIBRATION_INTERVAL = 8,   RC_4000MS_CALIBRATION_INTERVAL = 16,   RC_8000MS_CALIBRATION_INTERVAL = 32,   RC_16000MS_CALIBRATION_INTERVAL = 64 }
	Calibration interval configuration for the low-frequency RC oscillator. More...

Functions
ret_code_t	nrf_drv_clock_init (nrf_drv_clock_config_t const *p_config)
	Function for initialization the nrf_drv_clock module. More...
void	nrf_drv_clock_uninit (void)
	Function for uninitialization the nrf_drv_clock module. More...
void	nrf_drv_clock_lfclk_request (void)
	Function for requesting LFCLK. LFCLK can be repeatedly requested. More...
void	nrf_drv_clock_lfclk_release (void)
	Function for releasing LFCLK. If there is no more requests, LFCLK source will be stopped. More...
bool	nrf_drv_clock_lfclk_is_running (void)
	Function for checking LFCLK state. More...
void	nrf_drv_clock_hfclk_request (void)
	Function for requesting high-accuracy (for NRF51 it is XTAL) source HFCLK. High-accuracy source can be repeatedly requested. More...
void	nrf_drv_clock_hfclk_release (void)
	Function for releasing high-accuracy source HFCLK. If there is no more requests, high-accuracy source will be released.
bool	nrf_drv_clock_hfclk_is_running (void)
	Function for checking HFCLK state. More...
ret_code_t	nrf_drv_clock_calibration_force (void)
	Function for forcing calibration. More...
ret_code_t	nrf_drv_clock_is_calibrating (bool *p_is_calibrating)
	Function for checking if calibration is in progress. More...
__STATIC_INLINE uint32_t	nrf_drv_clock_ppi_task_addr (nrf_clock_task_t task)
	Function for returning a requested task address for the clock driver module. More...
__STATIC_INLINE uint32_t	nrf_drv_clock_ppi_event_addr (nrf_clock_event_t event)
	Function for returning a requested event address for the clock driver module. More...

Detailed Description

Driver for managing the low-frequency clock (LFCLK) and the high-frequency clock (HFCLK).

Macro Definition Documentation

#define NRF_DRV_CLOCK_DEAFULT_CONFIG

Value:

{                                                            \
        .cal_interval       = CLOCK_CONFIG_LF_RC_CAL_INTERVAL,   \
        .interrupt_priority = CLOCK_CONFIG_IRQ_PRIORITY,         \
    }

Clock default configuration.

Enumeration Type Documentation

enum nrf_drv_clock_lf_cal_interval_t

Calibration interval configuration for the low-frequency RC oscillator.

Calibration can be affected by radio transmission. To avoid this problem, call nrf_drv_clock_calibration_force() and wait for end of calibration.

Function Documentation

ret_code_t nrf_drv_clock_calibration_force

(

void

)

Function for forcing calibration.

This function resets the calibration interval timer. The nrf_drv_clock_is_calibrating() function can be polled to check if calibration is still in progress.

Return values

NRF_SUCCESS	If the procedure was successful.
NRF_ERROR_FORBIDDEN	If Softdevice is present or selected LFCLK source is not RC oscillator.

bool nrf_drv_clock_hfclk_is_running

(

void

)

Function for checking HFCLK state.

Return values

true	if the HFCLK is running (for NRF51 XTAL source), false if not.

void nrf_drv_clock_hfclk_request

(

void

)

Function for requesting high-accuracy (for NRF51 it is XTAL) source HFCLK. High-accuracy source can be repeatedly requested.

The nrf_drv_clock_hfclk_is_running() function can be polled to check if it has started.

ret_code_t nrf_drv_clock_init

(

nrf_drv_clock_config_t const *

p_config

)

Function for initialization the nrf_drv_clock module.

After initialization, the module is in power off state (clocks are not requested).

Parameters

[in]

p_config

Initial configuration. Default configuration used if NULL.

Return values

NRF_SUCCESS	If the procedure was successful.
MODULE_ALREADY_INITIALIZED	If the driver was already initialized.
NRF_ERROR_SOFTDEVICE_NOT_ENABLED	If the SoftDevice was not enabled.

ret_code_t nrf_drv_clock_is_calibrating

(

bool *

p_is_calibrating

)

Function for checking if calibration is in progress.

Parameters

[out]

p_is_calibrating

true if calibration is in progress, false if not.

Return values

NRF_SUCCESS	If the procedure was successful.
NRF_ERROR_FORBIDDEN	If Softdevice is present or selected LFCLK source is not RC oscillator.

bool nrf_drv_clock_lfclk_is_running

(

void

)

Function for checking LFCLK state.

Return values

true	if the LFCLK is running, false if not.

void nrf_drv_clock_lfclk_release

(

void

)

Function for releasing LFCLK. If there is no more requests, LFCLK source will be stopped.

Note

When Softdevice is enabled, LFCLK is always running.

void nrf_drv_clock_lfclk_request

(

void

)

Function for requesting LFCLK. LFCLK can be repeatedly requested.

Note

When Softdevice is enabled, LFCLK is always running.

If it is first request, selected LFCLK source will be started. The nrf_drv_clock_lfclk_is_running() function can be polled to check if it has started.

__STATIC_INLINE uint32_t nrf_drv_clock_ppi_event_addr

(

nrf_clock_event_t

event

)

Function for returning a requested event address for the clock driver module.

Parameters

[in]

event

One of the peripheral events.

Return values

Event

address.

__STATIC_INLINE uint32_t nrf_drv_clock_ppi_task_addr

(

nrf_clock_task_t

task

)

Function for returning a requested task address for the clock driver module.

Parameters

[in]

task

One of the peripheral tasks.

Return values

Task

address.

void nrf_drv_clock_uninit

(

void

)

Function for uninitialization the nrf_drv_clock module.

After uninitialization, the module is in idle state.