Functions
uint32_t	sd_ble_gatts_service_add (uint8_t type, ble_uuid_t const p_uuid, uint16_t p_handle)
	Add a service declaration to the Attribute Table. More...

uint32_t	sd_ble_gatts_include_add (uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *p_include_handle)
	Add an include declaration to the Attribute Table. More...

uint32_t	sd_ble_gatts_characteristic_add (uint16_t service_handle, ble_gatts_char_md_t const p_char_md, ble_gatts_attr_t const p_attr_char_value, ble_gatts_char_handles_t *p_handles)
	Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table. More...

uint32_t	sd_ble_gatts_descriptor_add (uint16_t char_handle, ble_gatts_attr_t const p_attr, uint16_t p_handle)
	Add a descriptor to the Attribute Table. More...

uint32_t	sd_ble_gatts_value_set (uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)
	Set the value of a given attribute. More...

uint32_t	sd_ble_gatts_value_get (uint16_t conn_handle, uint16_t handle, ble_gatts_value_t *p_value)
	Get the value of a given attribute. More...

uint32_t	sd_ble_gatts_hvx (uint16_t conn_handle, ble_gatts_hvx_params_t const *p_hvx_params)
	Notify or Indicate an attribute value. More...

uint32_t	sd_ble_gatts_service_changed (uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle)
	Indicate the Service Changed attribute value. More...

uint32_t	sd_ble_gatts_rw_authorize_reply (uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const *p_rw_authorize_reply_params)
	Respond to a Read/Write authorization request. More...

uint32_t	sd_ble_gatts_sys_attr_set (uint16_t conn_handle, uint8_t const *p_sys_attr_data, uint16_t len, uint32_t flags)
	Update persistent system attribute information. More...

uint32_t	sd_ble_gatts_sys_attr_get (uint16_t conn_handle, uint8_t p_sys_attr_data, uint16_t p_len, uint32_t flags)
	Retrieve persistent system attribute information from the stack. More...

Detailed Description

Function Documentation

uint32_t sd_ble_gatts_characteristic_add	(	uint16_t	service_handle,
		ble_gatts_char_md_t const *	p_char_md,
		ble_gatts_attr_t const *	p_attr_char_value,
		ble_gatts_char_handles_t *	p_handles
	)

Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the Attribute Table.

Note: It is currently only possible to add a characteristic to the last added service (i.e. only sequential population is supported at this time).; Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits, readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.; If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.

Parameters

[in]	service_handle	Handle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
[in]	p_char_md	Characteristic metadata.
[in]	p_attr_char_value	Pointer to the attribute structure corresponding to the characteristic value.
[out]	p_handles	Pointer to the structure where the assigned handles will be stored.

Return values

NRF_SUCCESS	Successfully added a characteristic.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
NRF_ERROR_INVALID_STATE	Invalid state to perform operation, a service context is required.
NRF_ERROR_FORBIDDEN	Forbidden value supplied, certain UUIDs are reserved for the stack.
NRF_ERROR_NO_MEM	Not enough memory to complete operation.
NRF_ERROR_DATA_SIZE	Invalid data size(s) supplied, attribute lengths are restricted by Maximum attribute lengths.

uint32_t sd_ble_gatts_descriptor_add	(	uint16_t	char_handle,
		ble_gatts_attr_t const *	p_attr,
		uint16_t *	p_handle
	)

Add a descriptor to the Attribute Table.

Note: It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential population is supported at this time).

Parameters

[in]	char_handle	Handle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
[in]	p_attr	Pointer to the attribute structure.
[out]	p_handle	Pointer to a 16-bit word where the assigned handle will be stored.

Return values

NRF_SUCCESS	Successfully added a descriptor.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
NRF_ERROR_INVALID_STATE	Invalid state to perform operation, a characteristic context is required.
NRF_ERROR_FORBIDDEN	Forbidden value supplied, certain UUIDs are reserved for the stack.
NRF_ERROR_NO_MEM	Not enough memory to complete operation.
NRF_ERROR_DATA_SIZE	Invalid data size(s) supplied, attribute lengths are restricted by Maximum attribute lengths.

uint32_t sd_ble_gatts_hvx	(	uint16_t	conn_handle,
		ble_gatts_hvx_params_t const *	p_hvx_params
	)

Notify or Indicate an attribute value.

This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that the application can atomically perform a value update and a server initiated transaction with a single API call. If the application chooses to indicate an attribute value, a BLE_GATTS_EVT_HVC event will be issued as soon as the confirmation arrives from the peer.

Note: The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution. When receiveing the error codes NRF_ERROR_INVALID_STATE, NRF_ERROR_BUSY, BLE_ERROR_GATTS_SYS_ATTR_MISSING and BLE_ERROR_NO_TX_BUFFERS the Attribute Table has been updated. The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).; It is important to note that a notification will consume an application buffer, and will therefore generate a BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the standard server internal buffer and thus will only generate a BLE_GATTS_EVT_HVC event as soon as the confirmation has been received from the peer. Please see the documentation of sd_ble_tx_buffer_count_get for more details.

Parameters

[in]	conn_handle	Connection handle.
[in]	p_hvx_params	Pointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with the contents pointed by it before sending the notification or indication.

Return values

NRF_SUCCESS	Successfully queued a notification or indication for transmission, and optionally updated the attribute value.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State or notifications and/or indications not enabled in the CCCD.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied.
BLE_ERROR_INVALID_ATTR_HANDLE	Invalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
BLE_ERROR_GATTS_INVALID_ATTR_TYPE	Invalid attribute type(s) supplied, only characteristic values may be notified and indicated.
NRF_ERROR_NOT_FOUND	Attribute not found.
NRF_ERROR_DATA_SIZE	Invalid data size(s) supplied.
NRF_ERROR_BUSY	Procedure already in progress.
BLE_ERROR_GATTS_SYS_ATTR_MISSING	System attributes missing, use sd_ble_gatts_sys_attr_set to set them to a known value.
BLE_ERROR_NO_TX_BUFFERS	There are no available buffers to send the data, applies only to notifications.

uint32_t sd_ble_gatts_include_add	(	uint16_t	service_handle,
		uint16_t	inc_srvc_handle,
		uint16_t *	p_include_handle
	)

Add an include declaration to the Attribute Table.

Note: It is currently only possible to add an include declaration to the last added service (i.e. only sequential population is supported at this time).; The included service must already be present in the Attribute Table prior to this call.

Parameters

[in]	service_handle	Handle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
[in]	inc_srvc_handle	Handle of the included service.
[out]	p_include_handle	Pointer to a 16-bit word where the assigned handle will be stored.

Return values

NRF_SUCCESS	Successfully added an include declaration.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied, handle values need to match previously added services.
NRF_ERROR_INVALID_STATE	Invalid state to perform operation.
NRF_ERROR_FORBIDDEN	Forbidden value supplied, self inclusions are not allowed.
NRF_ERROR_NO_MEM	Not enough memory to complete operation.
NRF_ERROR_NOT_FOUND	Attribute not found.

uint32_t sd_ble_gatts_rw_authorize_reply	(	uint16_t	conn_handle,
		ble_gatts_rw_authorize_reply_params_t const *	p_rw_authorize_reply_params
	)

Respond to a Read/Write authorization request.

Note: This call should only be used as a response to a BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.

Parameters

[in]	conn_handle	Connection handle.
[in]	p_rw_authorize_reply_params	Pointer to a structure with the attribute provided by the application.

Return values

NRF_SUCCESS	Successfully queued a response to the peer, and in the case of a write operation, Attribute Table updated.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State or no authorization request pending.
NRF_ERROR_INVALID_PARAM	Authorization op invalid, or for Read Authorization reply: requested handles not replied with, or for Write Authorization reply: handle supplied does not match requested handle.
NRF_ERROR_BUSY	The stack is busy. Retry at later time.

uint32_t sd_ble_gatts_service_add	(	uint8_t	type,
		ble_uuid_t const *	p_uuid,
		uint16_t *	p_handle
	)

Add a service declaration to the Attribute Table.

Parameters

[in]	type	Toggles between primary and secondary services, see GATT Server Service Types.
[in]	p_uuid	Pointer to service UUID.
[out]	p_handle	Pointer to a 16-bit word where the assigned handle will be stored.

Note: Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to add a secondary service declaration that is not referenced by another service later in the Attribute Table.

Return values

NRF_SUCCESS	Successfully added a service declaration.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
NRF_ERROR_FORBIDDEN	Forbidden value supplied, certain UUIDs are reserved for the stack.
NRF_ERROR_NO_MEM	Not enough memory to complete operation.

uint32_t sd_ble_gatts_service_changed	(	uint16_t	conn_handle,
		uint16_t	start_handle,
		uint16_t	end_handle
	)

Indicate the Service Changed attribute value.

This call will send a Handle Value Indication to one or more peers connected to inform them that the Attribute Table layout has changed. As soon as the peer has confirmed the indication, a BLE_GATTS_EVT_SC_CONFIRM event will be issued.

Note: Some of the restrictions and limitations that apply to sd_ble_gatts_hvx also apply here.

Parameters

[in]	conn_handle	Connection handle.
[in]	start_handle	Start of affected attribute handle range.
[in]	end_handle	End of affected attribute handle range.

Return values

NRF_SUCCESS	Successfully queued the Service Changed indication for transmission.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State or notifications and/or indications not enabled in the CCCD.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied.
BLE_ERROR_INVALID_ATTR_HANDLE	Invalid attribute handle(s) supplied, handles must be in the range populated by the application.
NRF_ERROR_INVALID_STATE	Invalid state to perform operation, notifications or indications must be enabled in the CCCD.
NRF_ERROR_BUSY	Procedure already in progress.
BLE_ERROR_GATTS_SYS_ATTR_MISSING	System attributes missing, use sd_ble_gatts_sys_attr_set to set them to a known value.

uint32_t sd_ble_gatts_sys_attr_get	(	uint16_t	conn_handle,
		uint8_t *	p_sys_attr_data,
		uint16_t *	p_len,
		uint32_t	flags
	)

Retrieve persistent system attribute information from the stack.

This call is used to retrieve information about values to be stored perisistently by the application during the lifetime of a connection or after it has been terminated. When a new connection is established with the same bonded device, the system attribute information retrieved with this function should be restored using using sd_ble_gatts_sys_attr_set. If retrieved after disconnection, the data should be read before a new connection established. The connection handle for the previous, now disconnected, connection will remain valid until a new one is created to allow this API call to refer to it. Connection handles belonging to active connections can be used as well, but care should be taken since the system attributes may be written to at any time by the peer during a connection's lifetime.

Note: When the BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be returned.; When the BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be returned.

Parameters

[in]	conn_handle	Connection handle of the recently terminated connection.
[out]	p_sys_attr_data	Pointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to obtain the length of the data
[in,out]	p_len	Size of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
[in]	flags	Optional additional flags, see System Attribute Flags

Return values

NRF_SUCCESS	Successfully retrieved the system attribute information.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_DATA_SIZE	The system attribute information did not fit into the provided buffer.
NRF_ERROR_NOT_FOUND	No system attributes found.

uint32_t sd_ble_gatts_sys_attr_set	(	uint16_t	conn_handle,
		uint8_t const *	p_sys_attr_data,
		uint16_t	len,
		uint32_t	flags
	)

Update persistent system attribute information.

Supply information about persistent system attributes to the stack, previously obtained using sd_ble_gatts_sys_attr_get. This call is only allowed for active connections, and is usually made immediately after a connection is established with an known bonded device, often as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.

p_sysattrs may point directly to the application's stored copy of the system attributes obtained using sd_ble_gatts_sys_attr_get. If the pointer is NULL, the system attribute info is initialized, assuming that the application does not have any previously saved system attribute data for this device.

Note: The state of persistent system attributes is reset upon connection establishment and then remembered for its duration.; If this call returns with an error code different from NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially. This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or reset the SoftDevice to return to a known state.; When the BLE_GATTS_SYS_ATTR_FLAG_SYS_SRVCS is used with this function, only the system attributes included in system services will be modified.; When the BLE_GATTS_SYS_ATTR_FLAG_USR_SRVCS is used with this function, only the system attributes included in user services will be modified.

Parameters

[in]	conn_handle	Connection handle.
[in]	p_sys_attr_data	Pointer to a saved copy of system attributes supplied to the stack, or NULL.
[in]	len	Size of data pointed by p_sys_attr_data, in octets.
[in]	flags	Optional additional flags, see System Attribute Flags

Return values

NRF_SUCCESS	Successfully set the system attribute information.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_DATA	Invalid data supplied, the data should be exactly the same as retrieved with sd_ble_gatts_sys_attr_get.
NRF_ERROR_NO_MEM	Not enough memory to complete operation.
NRF_ERROR_BUSY	The stack is busy. Retry at later time.

uint32_t sd_ble_gatts_value_get	(	uint16_t	conn_handle,
		uint16_t	handle,
		ble_gatts_value_t *	p_value
	)

Get the value of a given attribute.

Parameters

[in]	conn_handle	Connection handle. If the value does not belong to a system attribute then BLE_CONN_HANDLE_INVALID can be used.
[in]	handle	Attribute handle.
[in,out]	p_value	Attribute value information.

Note: If the attribute value is longer than the size of the supplied buffer, p_len will return the total attribute value length (excluding offset), and not the number of bytes actually returned in p_data. The application may use this information to allocate a suitable buffer size.; When retrieving system attribute values with this function, the connection handle may refer to an already disconnected connection. Refer to the documentation of sd_ble_gatts_sys_attr_get for further information.

Return values

NRF_SUCCESS	Successfully retrieved the value of the attribute.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_NOT_FOUND	Attribute not found.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid connection handle supplied.
BLE_ERROR_GATTS_INVALID_ATTR_TYPE	BLE_CONN_HANDLE_INVALID supplied on a system attribute.

uint32_t sd_ble_gatts_value_set	(	uint16_t	conn_handle,
		uint16_t	handle,
		ble_gatts_value_t *	p_value
	)

Set the value of a given attribute.

Parameters

[in]	conn_handle	Connection handle. If the value does not belong to a system attribute then BLE_CONN_HANDLE_INVALID can be used.
[in]	handle	Attribute handle.
[in,out]	p_value	Attribute value information.

Note: Values other than system attributes can be set at any time, regardless of wheter any active connections exist.

Return values

NRF_SUCCESS	Successfully set the value of the attribute.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied.
NRF_ERROR_NOT_FOUND	Attribute not found.
NRF_ERROR_FORBIDDEN	Forbidden handle supplied, certain attributes are not modifiable by the application.
NRF_ERROR_DATA_SIZE	Invalid data size(s) supplied, attribute lengths are restricted by Maximum attribute lengths.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid connection handle supplied.
BLE_ERROR_GATTS_INVALID_ATTR_TYPE	BLE_CONN_HANDLE_INVALID supplied on a system attribute.

Functions

Detailed Description

Function Documentation