Heart Rate Service module. More...

Data Structures
struct	ble_hrs_evt_t
	Heart Rate Service event. More...

struct	ble_hrs_init_t
	Heart Rate Service init structure. This contains all options and data needed for initialization of the service. More...

struct	ble_hrs_s
	Heart Rate Service structure. This contains various status information for the service. More...

Macros
#define	BLE_HRS_BODY_SENSOR_LOCATION_OTHER 0

#define	BLE_HRS_BODY_SENSOR_LOCATION_CHEST 1

#define	BLE_HRS_BODY_SENSOR_LOCATION_WRIST 2

#define	BLE_HRS_BODY_SENSOR_LOCATION_FINGER 3

#define	BLE_HRS_BODY_SENSOR_LOCATION_HAND 4

#define	BLE_HRS_BODY_SENSOR_LOCATION_EAR_LOBE 5

#define	BLE_HRS_BODY_SENSOR_LOCATION_FOOT 6

#define	BLE_HRS_MAX_BUFFERED_RR_INTERVALS 20

Typedefs
typedef struct ble_hrs_s	ble_hrs_t

typedef void(*	ble_hrs_evt_handler_t )(ble_hrs_t p_hrs, ble_hrs_evt_t p_evt)
	Heart Rate Service event handler type.

Enumerations
enum	ble_hrs_evt_type_t { BLE_HRS_EVT_NOTIFICATION_ENABLED, BLE_HRS_EVT_NOTIFICATION_DISABLED }
	Heart Rate Service event type. More...

Functions
uint32_t	ble_hrs_init (ble_hrs_t p_hrs, const ble_hrs_init_t p_hrs_init)
	Function for initializing the Heart Rate Service. More...

void	ble_hrs_on_ble_evt (ble_hrs_t p_hrs, ble_evt_t p_ble_evt)
	Function for handling the Application's BLE Stack events. More...

uint32_t	ble_hrs_heart_rate_measurement_send (ble_hrs_t *p_hrs, uint16_t heart_rate)
	Function for sending heart rate measurement if notification has been enabled. More...

void	ble_hrs_rr_interval_add (ble_hrs_t *p_hrs, uint16_t rr_interval)
	Function for adding a RR Interval measurement to the RR Interval buffer. More...

bool	ble_hrs_rr_interval_buffer_is_full (ble_hrs_t *p_hrs)
	Function for checking if RR Interval buffer is full. More...

uint32_t	ble_hrs_sensor_contact_supported_set (ble_hrs_t *p_hrs, bool is_sensor_contact_supported)
	Function for setting the state of the Sensor Contact Supported bit. More...

void	ble_hrs_sensor_contact_detected_update (ble_hrs_t *p_hrs, bool is_sensor_contact_detected)
	Function for setting the state of the Sensor Contact Detected bit. More...

uint32_t	ble_hrs_body_sensor_location_set (ble_hrs_t *p_hrs, uint8_t body_sensor_location)
	Function for setting the Body Sensor Location. More...

Detailed Description

Heart Rate Service module.

This module implements the Heart Rate Service with the Heart Rate Measurement, Body Sensor Location and Heart Rate Control Point characteristics. During initialization it adds the Heart Rate Service and Heart Rate Measurement characteristic to the BLE stack database. Optionally it also adds the Body Sensor Location and Heart Rate Control Point characteristics.

If enabled, notification of the Heart Rate Measurement characteristic is performed when the application calls ble_hrs_heart_rate_measurement_send().

The Heart Rate Service also provides a set of functions for manipulating the various fields in the Heart Rate Measurement characteristic, as well as setting the Body Sensor Location characteristic value.

If an event handler is supplied by the application, the Heart Rate Service will generate Heart Rate Service events to the application.

Note: The application must propagate BLE stack events to the Heart Rate Service module by calling ble_hrs_on_ble_evt() from the SoftDevice Event Handler callback.; Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.

Macro Definition Documentation

#define BLE_HRS_MAX_BUFFERED_RR_INTERVALS 20

Size of RR Interval buffer inside service.

Enumeration Type Documentation

enum ble_hrs_evt_type_t

Heart Rate Service event type.

Enumerator
BLE_HRS_EVT_NOTIFICATION_ENABLED	Heart Rate value notification enabled event.
BLE_HRS_EVT_NOTIFICATION_DISABLED	Heart Rate value notification disabled event.

Function Documentation

uint32_t ble_hrs_body_sensor_location_set	(	ble_hrs_t *	p_hrs,
		uint8_t	body_sensor_location
	)

Function for setting the Body Sensor Location.

Sets a new value of the Body Sensor Location characteristic. The new value will be sent to the client the next time the client reads the Body Sensor Location characteristic.

Parameters

[in]	p_hrs	Heart Rate Service structure.
[in]	body_sensor_location	New Body Sensor Location.

Returns: NRF_SUCCESS on success, otherwise an error code.

uint32_t ble_hrs_heart_rate_measurement_send	(	ble_hrs_t *	p_hrs,
		uint16_t	heart_rate
	)

Function for sending heart rate measurement if notification has been enabled.

The application calls this function after having performed a heart rate measurement. If notification has been enabled, the heart rate measurement data is encoded and sent to the client.

Parameters

[in]	p_hrs	Heart Rate Service structure.
[in]	heart_rate	New heart rate measurement.

Returns: NRF_SUCCESS on success, otherwise an error code.

uint32_t ble_hrs_init	(	ble_hrs_t *	p_hrs,
		const ble_hrs_init_t *	p_hrs_init
	)

Function for initializing the Heart Rate Service.

Parameters

[out]	p_hrs	Heart Rate Service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify this particular service instance.
[in]	p_hrs_init	Information needed to initialize the service.

Returns: NRF_SUCCESS on successful initialization of service, otherwise an error code.

void ble_hrs_on_ble_evt	(	ble_hrs_t *	p_hrs,
		ble_evt_t *	p_ble_evt
	)

Function for handling the Application's BLE Stack events.

Handles all events from the BLE stack of interest to the Heart Rate Service.

Parameters

[in]	p_hrs	Heart Rate Service structure.
[in]	p_ble_evt	Event received from the BLE stack.

void ble_hrs_rr_interval_add	(	ble_hrs_t *	p_hrs,
		uint16_t	rr_interval
	)

Function for adding a RR Interval measurement to the RR Interval buffer.

All buffered RR Interval measurements will be included in the next heart rate measurement message, up to the maximum number of measurements that will fit into the message. If the buffer is full, the oldest measurement in the buffer will be deleted.

Parameters

[in]	p_hrs	Heart Rate Service structure.
[in]	rr_interval	New RR Interval measurement (will be buffered until the next transmission of Heart Rate Measurement).

bool ble_hrs_rr_interval_buffer_is_full ( ble_hrs_t * p_hrs )

Function for checking if RR Interval buffer is full.

Parameters

[in] p_hrs Heart Rate Service structure.

Returns: true if RR Interval buffer is full, false otherwise.

void ble_hrs_sensor_contact_detected_update	(	ble_hrs_t *	p_hrs,
		bool	is_sensor_contact_detected
	)

Function for setting the state of the Sensor Contact Detected bit.

Parameters

[in]	p_hrs	Heart Rate Service structure.
[in]	is_sensor_contact_detected	TRUE if sensor contact is detected, FALSE otherwise.

uint32_t ble_hrs_sensor_contact_supported_set	(	ble_hrs_t *	p_hrs,
		bool	is_sensor_contact_supported
	)

Function for setting the state of the Sensor Contact Supported bit.

Parameters

[in]	p_hrs	Heart Rate Service structure.
[in]	is_sensor_contact_supported	New state of the Sensor Contact Supported bit.

Returns: NRF_SUCCESS on success, otherwise an error code.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation