Human Interface Device Service module. More...

Data Structures
struct	ble_hids_char_id_t
	HID Service characteristic id. More...

struct	ble_hids_evt_t
	HID Service event. More...

struct	ble_hids_hid_information_t
	HID Information characteristic value. More...

struct	ble_hids_inp_rep_init_t
	HID Service Input Report characteristic init structure. This contains all options and data needed for initialization of one Input Report characteristic. More...

struct	ble_hids_outp_rep_init_t
	HID Service Output Report characteristic init structure. This contains all options and data needed for initialization of one Output Report characteristic. More...

struct	ble_hids_feature_rep_init_t
	HID Service Feature Report characteristic init structure. This contains all options and data needed for initialization of one Feature Report characteristic. More...

struct	ble_hids_rep_map_init_t
	HID Service Report Map characteristic init structure. This contains all options and data needed for initialization of the Report Map characteristic. More...

struct	ble_hids_rep_char_t
	HID Report characteristic structure. More...

struct	ble_hids_init_t
	HID Service init structure. This contains all options and data needed for initialization of the service. More...

struct	ble_hids_s
	HID Service structure. This contains various status information for the service. More...

Macros
#define	BLE_HIDS_MAX_INPUT_REP 10

#define	BLE_HIDS_MAX_OUTPUT_REP 10

#define	BLE_HIDS_MAX_FEATURE_REP 10

#define	HID_INFO_FLAG_REMOTE_WAKE_MSK 0x01

#define	HID_INFO_FLAG_NORMALLY_CONNECTABLE_MSK 0x02

Typedefs
typedef struct ble_hids_s	ble_hids_t

typedef void(*	ble_hids_evt_handler_t )(ble_hids_t p_hids, ble_hids_evt_t p_evt)
	HID Service event handler type.

Enumerations
enum	ble_hids_evt_type_t { BLE_HIDS_EVT_HOST_SUSP, BLE_HIDS_EVT_HOST_EXIT_SUSP, BLE_HIDS_EVT_NOTIF_ENABLED, BLE_HIDS_EVT_NOTIF_DISABLED, BLE_HIDS_EVT_REP_CHAR_WRITE, BLE_HIDS_EVT_BOOT_MODE_ENTERED, BLE_HIDS_EVT_REPORT_MODE_ENTERED, BLE_HIDS_EVT_REPORT_READ }
	HID Service event type. More...

Functions
uint32_t	ble_hids_init (ble_hids_t p_hids, const ble_hids_init_t p_hids_init)
	Function for initializing the HID Service. More...

void	ble_hids_on_ble_evt (ble_hids_t p_hids, ble_evt_t p_ble_evt)
	Function for handling the Application's BLE Stack events. More...

uint32_t	ble_hids_inp_rep_send (ble_hids_t p_hids, uint8_t rep_index, uint16_t len, uint8_t p_data)
	Function for sending Input Report. More...

uint32_t	ble_hids_boot_kb_inp_rep_send (ble_hids_t p_hids, uint16_t len, uint8_t p_data)
	Function for sending Boot Keyboard Input Report. More...

uint32_t	ble_hids_boot_mouse_inp_rep_send (ble_hids_t p_hids, uint8_t buttons, int8_t x_delta, int8_t y_delta, uint16_t optional_data_len, uint8_t p_optional_data)
	Function for sending Boot Mouse Input Report. More...

uint32_t	ble_hids_outp_rep_get (ble_hids_t p_hids, uint8_t rep_index, uint16_t len, uint8_t offset, uint8_t p_outp_rep)
	Function for getting the current value of Output Report from the stack. More...

Report Type values

#define	BLE_HIDS_REP_TYPE_INPUT 1

#define	BLE_HIDS_REP_TYPE_OUTPUT 2

#define	BLE_HIDS_REP_TYPE_FEATURE 3

Detailed Description

Human Interface Device Service module.

This module implements the Human Interface Device Service with the corresponding set of characteristics. During initialization it adds the Human Interface Device Service and a set of characteristics as per the Human Interface Device Service specification and the user requirements to the BLE stack database.

If enabled, notification of Input Report characteristics is performed when the application calls the corresponding ble_hids_xx_input_report_send() function.

If an event handler is supplied by the application, the Human Interface Device Service will generate Human Interface Device Service events to the application.

Note: The application must propagate BLE stack events to the Human Interface Device Service module by calling ble_hids_on_ble_evt() from the SoftDevice Event Handler callback.; Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.

Enumeration Type Documentation

enum ble_hids_evt_type_t

HID Service event type.

Enumerator
BLE_HIDS_EVT_HOST_SUSP	Suspend command received.
BLE_HIDS_EVT_HOST_EXIT_SUSP	Exit suspend command received.
BLE_HIDS_EVT_NOTIF_ENABLED	Notification enabled event.
BLE_HIDS_EVT_NOTIF_DISABLED	Notification disabled event.
BLE_HIDS_EVT_REP_CHAR_WRITE	A new value has been written to an Report characteristic.
BLE_HIDS_EVT_BOOT_MODE_ENTERED	Boot mode entered.
BLE_HIDS_EVT_REPORT_MODE_ENTERED	Report mode entered.
BLE_HIDS_EVT_REPORT_READ	Read with response

Function Documentation

uint32_t ble_hids_boot_kb_inp_rep_send	(	ble_hids_t *	p_hids,
		uint16_t	len,
		uint8_t *	p_data
	)

Function for sending Boot Keyboard Input Report.

Sends data on an Boot Keyboard Input Report characteristic.

Parameters

[in]	p_hids	HID Service structure.
[in]	len	Length of data to be sent.
[in]	p_data	Pointer to data to be sent.

Returns: NRF_SUCCESS on successful sending of the report, otherwise an error code.

uint32_t ble_hids_boot_mouse_inp_rep_send	(	ble_hids_t *	p_hids,
		uint8_t	buttons,
		int8_t	x_delta,
		int8_t	y_delta,
		uint16_t	optional_data_len,
		uint8_t *	p_optional_data
	)

Function for sending Boot Mouse Input Report.

Sends data on an Boot Mouse Input Report characteristic.

Parameters

[in]	p_hids	HID Service structure.
[in]	buttons	State of mouse buttons.
[in]	x_delta	Horizontal movement.
[in]	y_delta	Vertical movement.
[in]	optional_data_len	Length of optional part of Boot Mouse Input Report.
[in]	p_optional_data	Optional part of Boot Mouse Input Report.

Returns: NRF_SUCCESS on successful sending of the report, otherwise an error code.

uint32_t ble_hids_init	(	ble_hids_t *	p_hids,
		const ble_hids_init_t *	p_hids_init
	)

Function for initializing the HID Service.

Parameters

[out]	p_hids	HID Service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify this particular service instance.
[in]	p_hids_init	Information needed to initialize the service.

Returns: NRF_SUCCESS on successful initialization of service, otherwise an error code.

uint32_t ble_hids_inp_rep_send	(	ble_hids_t *	p_hids,
		uint8_t	rep_index,
		uint16_t	len,
		uint8_t *	p_data
	)

Function for sending Input Report.

Sends data on an Input Report characteristic.

Parameters

[in]	p_hids	HID Service structure.
[in]	rep_index	Index of the characteristic (corresponding to the index in ble_hids_t.inp_rep_array as passed to ble_hids_init()).
[in]	len	Length of data to be sent.
[in]	p_data	Pointer to data to be sent.

Returns: NRF_SUCCESS on successful sending of input report, otherwise an error code.

void ble_hids_on_ble_evt	(	ble_hids_t *	p_hids,
		ble_evt_t *	p_ble_evt
	)

Function for handling the Application's BLE Stack events.

Handles all events from the BLE stack of interest to the HID Service.

Parameters

[in]	p_hids	HID Service structure.
[in]	p_ble_evt	Event received from the BLE stack.

uint32_t ble_hids_outp_rep_get	(	ble_hids_t *	p_hids,
		uint8_t	rep_index,
		uint16_t	len,
		uint8_t	offset,
		uint8_t *	p_outp_rep
	)

Function for getting the current value of Output Report from the stack.

Fetches the current value of the output report characteristic from the stack.

Parameters

[in]	p_hids	HID Service structure.
[in]	rep_index	Index of the characteristic (corresponding to the index in ble_hids_t.outp_rep_array as passed to ble_hids_init()).
[in]	len	Length of output report needed.
[in]	offset	Offset in bytes to read from.
[out]	p_outp_rep	Pointer to the output report.

Returns: NRF_SUCCESS on successful read of the report, otherwise an error code.

Data Structures

Macros

Typedefs

Enumerations

Functions

Report Type values

Detailed Description

Enumeration Type Documentation

Function Documentation