Running Speed and Cadence Service

Running Speed and Cadence Service module. More...

Data Structures
struct	ble_rscs_evt_t
	Running Speed and Cadence Service event. More...
struct	ble_rscs_init_t
	Running Speed and Cadence Service init structure. This contains all options and data needed for initialization of the service. More...
struct	ble_rscs_s
	Running Speed and Cadence Service structure. This contains various status information for the service. More...
struct	ble_rscs_meas_s
	Running Speed and Cadence Service measurement structure. This contains a Running Speed and Cadence measurement. More...

Macros
#define	BLE_RSCS_FEATURE_INSTANT_STRIDE_LEN_BIT   (0x01 << 0)
	Running Speed and Cadence Service feature bits. More...
#define	BLE_RSCS_FEATURE_TOTAL_DISTANCE_BIT   (0x01 << 1)
#define	BLE_RSCS_FEATURE_WALKING_OR_RUNNING_STATUS_BIT   (0x01 << 2)
#define	BLE_RSCS_FEATURE_CALIBRATION_PROCEDURE_BIT   (0x01 << 3)
#define	BLE_RSCS_FEATURE_MULTIPLE_SENSORS_BIT   (0x01 << 4)

Typedefs
typedef struct ble_rscs_s	ble_rscs_t
	Running Speed and Cadence Service structure. This contains various status information for the service.
typedef void(*	ble_rscs_evt_handler_t )(ble_rscs_t *p_rscs, ble_rscs_evt_t *p_evt)
	Running Speed and Cadence Service event handler type.
typedef struct ble_rscs_meas_s	ble_rscs_meas_t
	Running Speed and Cadence Service measurement structure. This contains a Running Speed and Cadence measurement.

Enumerations
enum	ble_rscs_evt_type_t {   BLE_RSCS_EVT_NOTIFICATION_ENABLED,   BLE_RSCS_EVT_NOTIFICATION_DISABLED }
	Running Speed and Cadence Service event type. More...

Functions
uint32_t	ble_rscs_init (ble_rscs_t *p_rscs, const ble_rscs_init_t *p_rscs_init)
	Function for initializing the Running Speed and Cadence Service. More...
void	ble_rscs_on_ble_evt (ble_rscs_t *p_rscs, ble_evt_t *p_ble_evt)
	Function for handling the Application's BLE Stack events. More...
uint32_t	ble_rscs_measurement_send (ble_rscs_t *p_rscs, ble_rscs_meas_t *p_measurement)
	Function for sending running speed and cadence measurement if notification has been enabled. More...

Detailed Description

Running Speed and Cadence Service module.

This module implements the Running Speed and Cadence Service. If enabled, notification of the Running Speead and Candence Measurement is performed when the application calls ble_rscs_measurement_send().

If an event handler is supplied by the application, the Running Speed and Cadence Service will generate Running Speed and Cadence Service events to the application.

Note

The application must propagate BLE stack events to the Running Speead and Candence Service module by calling ble_rscs_on_ble_evt() from the SoftDevice Event Handler function.

Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.

Macro Definition Documentation

#define BLE_RSCS_FEATURE_CALIBRATION_PROCEDURE_BIT   (0x01 << 3)

Calibration Procedure Supported bit.

#define BLE_RSCS_FEATURE_INSTANT_STRIDE_LEN_BIT   (0x01 << 0)

Running Speed and Cadence Service feature bits.

Instantaneous Stride Length Measurement Supported bit.

#define BLE_RSCS_FEATURE_MULTIPLE_SENSORS_BIT   (0x01 << 4)

Multiple Sensor Locations Supported bit.

#define BLE_RSCS_FEATURE_TOTAL_DISTANCE_BIT   (0x01 << 1)

Total Distance Measurement Supported bit.

#define BLE_RSCS_FEATURE_WALKING_OR_RUNNING_STATUS_BIT   (0x01 << 2)

Walking or Running Status Supported bit.

Enumeration Type Documentation

enum ble_rscs_evt_type_t

Running Speed and Cadence Service event type.

Enumerator
BLE_RSCS_EVT_NOTIFICATION_ENABLED	Running Speed and Cadence value notification enabled event.
BLE_RSCS_EVT_NOTIFICATION_DISABLED	Running Speed and Cadence value notification disabled event.

Function Documentation

uint32_t ble_rscs_init	(	ble_rscs_t *	p_rscs,
		const ble_rscs_init_t *	p_rscs_init
	)

Function for initializing the Running Speed and Cadence Service.

Parameters

[out]	p_rscs	Running Speed and Cadence Service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify this particular service instance.
[in]	p_rscs_init	Information needed to initialize the service.

Returns

NRF_SUCCESS on successful initialization of service, otherwise an error code.

uint32_t ble_rscs_measurement_send	(	ble_rscs_t *	p_rscs,
		ble_rscs_meas_t *	p_measurement
	)

Function for sending running speed and cadence measurement if notification has been enabled.

The application calls this function after having performed a Running Speed and Cadence measurement. If notification has been enabled, the measurement data is encoded and sent to the client.

Parameters

[in]	p_rscs	Running Speed and Cadence Service structure.
[in]	p_measurement	Pointer to new running speed and cadence measurement.

Returns

NRF_SUCCESS on success, otherwise an error code.

void ble_rscs_on_ble_evt	(	ble_rscs_t *	p_rscs,
		ble_evt_t *	p_ble_evt
	)

Function for handling the Application's BLE Stack events.

Handles all events from the BLE stack of interest to the Running Speed and Cadence Service.

Parameters

[in]	p_rscs	Running Speed and Cadence Service structure.
[in]	p_ble_evt	Event received from the BLE stack.