GPIOTE abstraction for configuration of channels. More...

Enumerations
enum	nrf_gpiote_polarity_t { NRF_GPIOTE_POLARITY_LOTOHI = GPIOTE_CONFIG_POLARITY_LoToHi, NRF_GPIOTE_POLARITY_HITOLO = GPIOTE_CONFIG_POLARITY_HiToLo, NRF_GPIOTE_POLARITY_TOGGLE = GPIOTE_CONFIG_POLARITY_Toggle }
	Polarity for GPIOTE channel enumerator. More...

enum	nrf_gpiote_outinit_t { NRF_GPIOTE_INITIAL_VALUE_LOW = GPIOTE_CONFIG_OUTINIT_Low, NRF_GPIOTE_INITIAL_VALUE_HIGH = GPIOTE_CONFIG_OUTINIT_High }
	Initial output value for GPIOTE channel enumerator. More...

Functions
static __INLINE void	nrf_gpiote_task_config (uint32_t channel_number, uint32_t pin_number, nrf_gpiote_polarity_t polarity, nrf_gpiote_outinit_t initial_value)
	Function for configuring GPIOTE channel as output, setting the properly desired output level. More...

static __INLINE void	nrf_gpiote_event_config (uint32_t channel_number, uint32_t pin_number, nrf_gpiote_polarity_t polarity)
	Function for configuring GPIOTE channel as input, automatically clearing an event that appears in some cases under configuration. More...

static __INLINE void	nrf_gpiote_unconfig (uint32_t channel_number)
	Function for unconfiguring GPIOTE channel. More...

Detailed Description

GPIOTE abstraction for configuration of channels.

Enumeration Type Documentation

Initial output value for GPIOTE channel enumerator.

Enumerator
NRF_GPIOTE_INITIAL_VALUE_LOW	Low to high.
NRF_GPIOTE_INITIAL_VALUE_HIGH	High to low.

Polarity for GPIOTE channel enumerator.

static __INLINE void nrf_gpiote_event_config	(	uint32_t	channel_number,
		uint32_t	pin_number,
		nrf_gpiote_polarity_t	polarity
	)

static

Function for configuring GPIOTE channel as input, automatically clearing an event that appears in some cases under configuration.

Note that when configuring the channel as input an event might be triggered. Care of disabling interrupts for that channel is left to the user.

Parameters

channel_number	specifies the GPIOTE channel [0:3] to configure as an input channel.
pin_number	specifies the pin number [0:30] to use in the GPIOTE channel.
polarity	specifies the desired polarity in the output GPIOTE channel.

static __INLINE void nrf_gpiote_task_config	(	uint32_t	channel_number,
		uint32_t	pin_number,
		nrf_gpiote_polarity_t	polarity,
		nrf_gpiote_outinit_t	initial_value
	)

static

Function for configuring GPIOTE channel as output, setting the properly desired output level.

Parameters

channel_number	specifies the GPIOTE channel [0:3] to configure as an output channel.
pin_number	specifies the pin number [0:30] to use in the GPIOTE channel.
polarity	specifies the desired polarity in the output GPIOTE channel.
initial_value	specifies the initial value of the GPIOTE channel input after the channel configuration.

static __INLINE void nrf_gpiote_unconfig ( uint32_t channel_number )

static

Function for unconfiguring GPIOTE channel.

Note that when unconfiguring the channel, the pin is configured as GPIO PIN_CNF configuration.

Parameters

channel_number specifies the GPIOTE channel [0:3] to unconfigure.