Speed and Cadence Control Point module. More...

Data Structures
struct	ble_sc_ctrlpt_evt_t
	Speed and Cadence Control point event. More...

struct	ble_sc_ctrlpt_val_t

struct	ble_sc_ctrlpt_rsp_t

struct	ble_cs_ctrlpt_init_t
	Speed and Cadence Control Point init structure. This contains all options and data needed for initialization of the Speed and Cadence Control Point module. More...

struct	ble_sc_ctrlpt_resp_t
	Speed and Cadence Control Point response indication structure. More...

struct	ble_sc_ctrlpt_s
	Speed and Cadence Control Point structure. This contains various status information for the Speed and Cadence Control Point behavior. More...

Macros
#define	BLE_SC_CTRLPT_MAX_LEN 19

#define	BLE_SC_CTRLPT_MIN_LEN 1

#define	BLE_SRV_SC_CTRLPT_SENSOR_LOCATIONS_OP_SUPPORTED 0x01

#define	BLE_SRV_SC_CTRLPT_CUM_VAL_OP_SUPPORTED 0x02

#define	BLE_SRV_SC_CTRLPT_START_CALIB_OP_SUPPORTED 0x04

#define	SCPT_OPCODE_POS 0

#define	SCPT_PARAMETER_POS 1

#define	SCPT_RESPONSE_REQUEST_OPCODE_POS 1

#define	SCPT_RESPONSE_CODE_POS 2

#define	SCPT_RESPONSE_PARAMETER 3

#define	SCPT_MIN_RESPONSE_SIZE 3

#define	SCPT_MAX_RESPONSE_SIZE (SCPT_MIN_RESPONSE_SIZE + NB_MAX_SENSOR_LOCATIONS)

Typedefs
typedef struct ble_sc_ctrlpt_s	ble_sc_ctrlpt_t
	Speed and Cadence Control Point structure. This contains various status information for the Speed and Cadence Control Point behavior.

typedef ble_scpt_response_t(*	ble_sc_ctrlpt_evt_handler_t )(ble_sc_ctrlpt_t p_sc_ctrlpt, ble_sc_ctrlpt_evt_t p_evt)
	Speed and Cadence Control point event handler type.

Enumerations
enum	ble_sc_ctrlpt_evt_type_t { BLE_SC_CTRLPT_EVT_UPDATE_LOCATION, BLE_SC_CTRLPT_EVT_SET_CUMUL_VALUE, BLE_SC_CTRLPT_EVT_START_CALIBRATION }
	Speed and Cadence Control Point event type. More...

enum	ble_scpt_operator_t { BLE_SCPT_SET_CUMULATIVE_VALUE = 0x01, BLE_SCPT_START_AUTOMATIC_CALIBRATION = 0x02, BLE_SCPT_UPDATE_SENSOR_LOCATION = 0x03, BLE_SCPT_REQUEST_SUPPORTED_SENSOR_LOCATIONS = 0x04, BLE_SCPT_RESPONSE_CODE = 0x10 }

enum	ble_scpt_response_t { BLE_SCPT_SUCCESS = 0x01, BLE_SCPT_OP_CODE_NOT_SUPPORTED = 0x02, BLE_SCPT_INVALID_PARAMETER = 0x03, BLE_SCPT_OPERATION_FAILED = 0x04 }

enum	ble_scpt_procedure_status_t { BLE_SCPT_NO_PROC_IN_PROGRESS = 0x00, BLE_SCPT_AUTOMATIC_CALIB_IN_PROGRESS = 0x01, BLE_SCPT_INDICATION_PENDING = 0x02, BLE_SCPT_IND_CONFIRM_PENDING = 0x03 }

Functions
uint32_t	ble_sc_ctrlpt_init (ble_sc_ctrlpt_t p_sc_ctrlpt, const ble_cs_ctrlpt_init_t p_sc_ctrlpt_init)
	Function for Initializing the Speed and Cadence Control Point. More...

uint32_t	ble_sc_ctrlpt_rsp_send (ble_sc_ctrlpt_t *p_sc_ctrlpt, ble_scpt_response_t response_status)
	Function for sending a control point response. More...

void	ble_sc_ctrlpt_on_ble_evt (ble_sc_ctrlpt_t p_sc_ctrlpt, ble_evt_t p_ble_evt)
	Speed and Cadence Control Point BLE stack event handler. More...

Detailed Description

Speed and Cadence Control Point module.

This module implements the Speed and Cadence control point behavior. It is used by the Cycling Speed and Cadence Service module and the ble_sdk_srv_rsc module for control point mechanisms like setting a cumulative value, Start an automatic calibration, Update the sensor location or request the supported locations.

Note: Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.

Macro Definition Documentation

#define BLE_SC_CTRLPT_MAX_LEN 19

maximum lenght for Speed and cadence control point characteristic value.

#define BLE_SC_CTRLPT_MIN_LEN 1

minimum length for Speed and cadence control point characteristic value.

#define BLE_SRV_SC_CTRLPT_CUM_VAL_OP_SUPPORTED 0x02

Support for setting cumulative value related operations

#define BLE_SRV_SC_CTRLPT_SENSOR_LOCATIONS_OP_SUPPORTED 0x01

Support for sensor location related operations

#define BLE_SRV_SC_CTRLPT_START_CALIB_OP_SUPPORTED 0x04

Support for starting calibration related operations

#define SCPT_MAX_RESPONSE_SIZE (SCPT_MIN_RESPONSE_SIZE + NB_MAX_SENSOR_LOCATIONS)

Maximum size for control point response.

#define SCPT_MIN_RESPONSE_SIZE 3

Minimum size for control point response.

#define SCPT_OPCODE_POS 0

Request opcode position.

#define SCPT_PARAMETER_POS 1

Request parameter position.

#define SCPT_RESPONSE_CODE_POS 2

Response position of response code.

#define SCPT_RESPONSE_PARAMETER 3

Response position of response parameter.

#define SCPT_RESPONSE_REQUEST_OPCODE_POS 1

Response position of requested opcode.

Enumeration Type Documentation

enum ble_sc_ctrlpt_evt_type_t

Speed and Cadence Control Point event type.

Enumerator
BLE_SC_CTRLPT_EVT_UPDATE_LOCATION	rcvd update location opcode (the control point handles the change of location automatically, the event just informs the application in case it needs to adjust its algorithm).
BLE_SC_CTRLPT_EVT_SET_CUMUL_VALUE	rcvd set cumulative value opcode, it is then up to the application to use the new cumulative value.
BLE_SC_CTRLPT_EVT_START_CALIBRATION	rcvd start calibration opcode, the application needs, at the end ot the calibration to call ble_sc_ctrlpt_send_rsp.

enum ble_scpt_operator_t

Speed and Cadence Control Point operator code (see RSC service specification)

Enumerator
BLE_SCPT_SET_CUMULATIVE_VALUE	Operator to set a given cumulative value.
BLE_SCPT_START_AUTOMATIC_CALIBRATION	Operator to start automatic calibration.
BLE_SCPT_UPDATE_SENSOR_LOCATION	Operator to update the sensor location.
BLE_SCPT_REQUEST_SUPPORTED_SENSOR_LOCATIONS	Operator to request the supported sensor locations.
BLE_SCPT_RESPONSE_CODE	Response Code.

enum ble_scpt_procedure_status_t

Speed and Cadence Control Point procedure status (indicates is a procedure is in progress or not and which procedure is in progress

Enumerator
BLE_SCPT_NO_PROC_IN_PROGRESS	No procedure in progress.
BLE_SCPT_AUTOMATIC_CALIB_IN_PROGRESS	Automatic Calibration is in progress.
BLE_SCPT_INDICATION_PENDING	Control Point Indication is pending.
BLE_SCPT_IND_CONFIRM_PENDING	Waiting for the indication confirmation.

enum ble_scpt_response_t

Speed and Cadence Control Point response parameter (see RSC service specification)

Enumerator
BLE_SCPT_SUCCESS	Sucess Response.
BLE_SCPT_OP_CODE_NOT_SUPPORTED	Error Response received opcode not supported.
BLE_SCPT_INVALID_PARAMETER	Error Response received parameter invalid.
BLE_SCPT_OPERATION_FAILED	Error Response operation failed.

Function Documentation

uint32_t ble_sc_ctrlpt_init	(	ble_sc_ctrlpt_t *	p_sc_ctrlpt,
		const ble_cs_ctrlpt_init_t *	p_sc_ctrlpt_init
	)

Function for Initializing the Speed and Cadence Control Point.

Parameters

[in]	p_sc_ctrlpt	Speed and Cadence Control Point structure.
[in]	p_sc_ctrlpt_init	Information needed to initialize the control point behavior.

Returns: NRF_SUCCESS on successful initialization of service, otherwise an error code.

void ble_sc_ctrlpt_on_ble_evt	(	ble_sc_ctrlpt_t *	p_sc_ctrlpt,
		ble_evt_t *	p_ble_evt
	)

Speed and Cadence Control Point BLE stack event handler.

Handles all events from the BLE stack of interest to the Speed and Cadence Control Point.

Parameters

[in]	p_sc_ctrlpt	Speed and Cadence Control Point structure.
[in]	p_ble_evt	Event received from the BLE stack.

uint32_t ble_sc_ctrlpt_rsp_send	(	ble_sc_ctrlpt_t *	p_sc_ctrlpt,
		ble_scpt_response_t	response_status
	)

Function for sending a control point response.

Function for sending a control point response when the control point received was BLE_SCPT_START_AUTOMATIC_CALIBRATION. To be called after the calibration procedure is finished.

Parameters

[in]	p_sc_ctrlpt	Speed and Cadence Control Point structure.
[in]	response_status	status to include in the control point response.

Data Structures

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

Enumeration Type Documentation

Function Documentation