BSP module. More...

Macros
#define	BUTTON_ERASE_BONDING BSP_BUTTON_0_MASK

#define	BUTTON_ERASE_ALL BSP_BUTTON_1_MASK

#define	BUTTON_ADVERTISE BSP_BUTTON_0_MASK

#define	BUTTON_CLEAR_EVT BSP_BUTTON_1_MASK

#define	BUTTON_CAPSLOCK BSP_BUTTON_2_MASK

#define	BSP_BUTTONS_ALL 0xFFFFFFFF

#define	BSP_BUTTONS_NONE 0

#define	BSP_INIT_NONE 0
	Types of BSP initialization. More...

#define	BSP_INIT_LED (1 << 0)

#define	BSP_INIT_BUTTONS (1 << 1)

#define	BSP_INIT_UART (1 << 2)

#define	BSP_INDICATIONS_LIST

Typedefs
typedef void(*	bsp_event_callback_t )(bsp_event_t)
	Function for handling BSP event callback. More...

Enumerations
enum	bsp_indication_t { BSP_INDICATE_FIRST = 0, BSP_INDICATE_IDLE = BSP_INDICATE_FIRST, BSP_INDICATE_SCANNING, BSP_INDICATE_ADVERTISING, BSP_INDICATE_ADVERTISING_WHITELIST, BSP_INDICATE_ADVERTISING_SLOW, BSP_INDICATE_ADVERTISING_DIRECTED, BSP_INDICATE_BONDING, BSP_INDICATE_CONNECTED, BSP_INDICATE_SENT_OK, BSP_INDICATE_SEND_ERROR, BSP_INDICATE_RCV_OK, BSP_INDICATE_RCV_ERROR, BSP_INDICATE_FATAL_ERROR, BSP_INDICATE_ALERT_0, BSP_INDICATE_ALERT_1, BSP_INDICATE_ALERT_2, BSP_INDICATE_ALERT_3, BSP_INDICATE_ALERT_OFF, BSP_INDICATE_USER_STATE_OFF, BSP_INDICATE_USER_STATE_0, BSP_INDICATE_USER_STATE_1, BSP_INDICATE_USER_STATE_2, BSP_INDICATE_USER_STATE_3, BSP_INDICATE_USER_STATE_ON, BSP_INDICATE_LAST = BSP_INDICATE_USER_STATE_ON }
	BSP indication states. More...

enum	bsp_event_t { BSP_EVENT_NOTHING = 0, BSP_EVENT_CLEAR_BONDING_DATA, BSP_EVENT_CLEAR_ALERT, BSP_EVENT_DISCONNECT, BSP_EVENT_ADVERTISING_START, BSP_EVENT_ADVERTISING_STOP, BSP_EVENT_BOND, BSP_EVENT_RESET, BSP_EVENT_SLEEP, BSP_EVENT_WAKEUP, BSP_EVENT_DFU, BSP_EVENT_KEY_0, BSP_EVENT_KEY_1, BSP_EVENT_KEY_2, BSP_EVENT_KEY_3, BSP_EVENT_KEY_4, BSP_EVENT_KEY_5, BSP_EVENT_KEY_6, BSP_EVENT_KEY_7, BSP_EVENT_KEY_LAST = BSP_EVENT_KEY_7 }
	BSP events. More...

Functions
uint32_t	bsp_init (uint32_t type, uint32_t ticks_per_100ms, bsp_event_callback_t callback_p)
	Function for initializing BSP. More...

uint32_t	bsp_buttons_state_get (void)
	Function for getting buttons states. More...

uint32_t	bsp_event_to_button_assign (uint32_t button, bsp_event_t event)
	Function for assigning specific event to button. More...

uint32_t	bsp_indication_set (bsp_indication_t indicate)
	Function for configuring indicators to required state. More...

uint32_t	bsp_indication_text_set (bsp_indication_t indicate, const char *p_text)
	Function for configuring indicators to required state. More...

uint32_t	bsp_buttons_enable (uint32_t buttons)
	Function for enabling specified buttons (others are disabled). More...

Detailed Description

BSP module.

This module provides a layer of abstraction from the board. It allows the user to indicate certain states on LEDs in a simple way. Module functionality can be modified by additional defines:

BSP_SIMPLE reduces functionality of this module to enable(bsp_buttons_enable(uint32_t buttons)) and read state of the buttons (bsp_buttons_state_get())
BSP_UART_SUPPORT enables support for UART

Macro Definition Documentation

#define BSP_INDICATIONS_LIST

Value:

{                    \
        "BSP_INDICATE_IDLE\n\r",                  \
        "BSP_INDICATE_SCANNING\n\r",              \
        "BSP_INDICATE_ADVERTISING\n\r",           \
        "BSP_INDICATE_ADVERTISING_WHITELIST\n\r", \
        "BSP_INDICATE_ADVERTISING_SLOW\n\r",      \
        "BSP_INDICATE_ADVERTISING_DIRECTED\n\r",  \
        "BSP_INDICATE_BONDING\n\r",               \
        "BSP_INDICATE_CONNECTED\n\r",             \
        "BSP_INDICATE_SENT_OK\n\r",               \
        "BSP_INDICATE_SEND_ERROR\n\r",            \
        "BSP_INDICATE_RCV_OK\n\r",                \
        "BSP_INDICATE_RCV_ERROR\n\r",             \
        "BSP_INDICATE_FATAL_ERROR\n\r",           \
        "BSP_INDICATE_ALERT_0\n\r",               \
        "BSP_INDICATE_ALERT_1\n\r",               \
        "BSP_INDICATE_ALERT_2\n\r",               \
        "BSP_INDICATE_ALERT_3\n\r",               \
        "BSP_INDICATE_ALERT_OFF\n\r",             \
        "BSP_INDICATE_USER_STATE_OFF\n\r",        \
        "BSP_INDICATE_USER_STATE_0\n\r",          \
        "BSP_INDICATE_USER_STATE_1\n\r",          \
        "BSP_INDICATE_USER_STATE_2\n\r",          \
        "BSP_INDICATE_USER_STATE_3\n\r",          \
        "BSP_INDICATE_USER_STATE_ON\n\r"          \
}

See BSP indication states for a list of how these states are indicated for the PCA10028 board and the PCA10031 dongle.

#define BSP_INIT_BUTTONS (1 << 1)

This bit enables buttons during initialization (bsp_init).

#define BSP_INIT_LED (1 << 0)

This bit enables LEDs during initialization (bsp_init).

#define BSP_INIT_NONE 0

Types of BSP initialization.

This define specifies the type of initialization without support for LEDs and buttons bsp_init.

#define BSP_INIT_UART (1 << 2)

This bit enables UART during initialization (bsp_init).

Typedef Documentation

typedef void(* bsp_event_callback_t)(bsp_event_t)

Function for handling BSP event callback.

Upon an event in the BSP module, this callback function will be called to notify the application about the event.

Parameters

[in] bsp_event_t BSP event type.

Enumeration Type Documentation

enum bsp_event_t

BSP events.

Note: SP_EVENT_KEYS are by default assigned to buttons.

Enumerator
BSP_EVENT_NOTHING	This will unassign button from event.
BSP_EVENT_KEY_0	This event is by default assigned to BSP_BUTTON_0 (only if this button is present).
BSP_EVENT_KEY_1	This event is by default assigned to BSP_BUTTON_1 (only if this button is present).
BSP_EVENT_KEY_2	This event is by default assigned to BSP_BUTTON_2 (only if this button is present).
BSP_EVENT_KEY_3	This event is by default assigned to BSP_BUTTON_3 (only if this button is present).
BSP_EVENT_KEY_4	This event is by default assigned to BSP_BUTTON_4 (only if this button is present).
BSP_EVENT_KEY_5	This event is by default assigned to BSP_BUTTON_5 (only if this button is present).
BSP_EVENT_KEY_6	This event is by default assigned to BSP_BUTTON_6 (only if this button is present).
BSP_EVENT_KEY_7	This event is by default assigned to BSP_BUTTON_7 (only if this button is present).

enum bsp_indication_t

BSP indication states.

See BSP indication states for a list of how these states are indicated for the PCA10028 board and the PCA10031 dongle.

Enumerator
BSP_INDICATE_IDLE	See BSP_INDICATE_IDLE.
BSP_INDICATE_SCANNING	See BSP_INDICATE_SCANNING.
BSP_INDICATE_ADVERTISING	See BSP_INDICATE_ADVERTISING.
BSP_INDICATE_ADVERTISING_WHITELIST	See BSP_INDICATE_ADVERTISING_WHITELIST.
BSP_INDICATE_ADVERTISING_SLOW	See BSP_INDICATE_ADVERTISING_SLOW.
BSP_INDICATE_ADVERTISING_DIRECTED	See BSP_INDICATE_ADVERTISING_DIRECTED.
BSP_INDICATE_BONDING	See BSP_INDICATE_BONDING.
BSP_INDICATE_CONNECTED	See BSP_INDICATE_CONNECTED.
BSP_INDICATE_SENT_OK	See BSP_INDICATE_SENT_OK.
BSP_INDICATE_SEND_ERROR	See BSP_INDICATE_SEND_ERROR.
BSP_INDICATE_RCV_OK	See BSP_INDICATE_RCV_OK.
BSP_INDICATE_RCV_ERROR	See BSP_INDICATE_RCV_ERROR.
BSP_INDICATE_FATAL_ERROR	See BSP_INDICATE_FATAL_ERROR.
BSP_INDICATE_ALERT_0	See BSP_INDICATE_ALERT_0.
BSP_INDICATE_ALERT_1	See BSP_INDICATE_ALERT_1.
BSP_INDICATE_ALERT_2	See BSP_INDICATE_ALERT_2.
BSP_INDICATE_ALERT_3	See BSP_INDICATE_ALERT_3.
BSP_INDICATE_ALERT_OFF	See BSP_INDICATE_ALERT_OFF.
BSP_INDICATE_USER_STATE_OFF	See BSP_INDICATE_USER_STATE_OFF.
BSP_INDICATE_USER_STATE_0	See BSP_INDICATE_USER_STATE_0.
BSP_INDICATE_USER_STATE_1	See BSP_INDICATE_USER_STATE_1.
BSP_INDICATE_USER_STATE_2	See BSP_INDICATE_USER_STATE_2.
BSP_INDICATE_USER_STATE_3	See BSP_INDICATE_USER_STATE_3.
BSP_INDICATE_USER_STATE_ON	See BSP_INDICATE_USER_STATE_ON.

Function Documentation

uint32_t bsp_buttons_enable ( uint32_t buttons )

Function for enabling specified buttons (others are disabled).

This function enables the specified buttons and configures them to be scanned. All other buttons are disabled (inactive).

Parameters

[in] buttons Buttons to be enabled, encoded as bits (bit 0 = button 0, bit 1 = button 1, etc).

Return values

NRF_SUCCESS Successfully enabled.

uint32_t bsp_buttons_state_get ( void )

Function for getting buttons states.

This function returns the state of all buttons. Button 0 state is represented by bit 0 (1=pressed), Button 1 state by bit 1, and so on.

uint32_t bsp_event_to_button_assign	(	uint32_t	button,
		bsp_event_t	event
	)

Function for assigning specific event to button.

This function allows redefinition of standard events assigned to buttons. To unassign events, provide the event BSP_EVENT_NOTHING.

Parameters

[in]	button	Button ID to be redefined.
[in]	event	Event to be assigned to button.

Return values

NRF_SUCCESS	Event was successfully assigned to button.
NRF_ERROR_INVALID_PARAM	Invalid button ID.

uint32_t bsp_indication_set ( bsp_indication_t indicate )

Function for configuring indicators to required state.

This function indicates the required state by means of LEDs (if enabled).

Note: Alerts are indicated independently.

Parameters

[in] indicate State to be indicated.

Return values

NRF_SUCCESS	State was successfully indicated.
NRF_ERROR_NO_MEM	Internal timer operations queue was full.
NRF_ERROR_INVALID_STATE	Application timer module has not been initialized, or internal timer has not been created.

uint32_t bsp_indication_text_set	(	bsp_indication_t	indicate,
		const char *	p_text
	)

Function for configuring indicators to required state.

This function indicates the required state by means of LEDs (if enabled) and UART (if enabled).

Note: Alerts are indicated independently.

Parameters

[in]	indicate	State to be indicated.
[in]	p_text	Text to be output on UART.

Return values

NRF_SUCCESS	State was successfully indicated.
NRF_ERROR_NO_MEM	Internal Timer operations queue was full.
NRF_ERROR_INVALID_STATE	Internal timer module has not been initialized, or timer has not been created.

uint32_t bsp_init	(	uint32_t	type,
		uint32_t	ticks_per_100ms,
		bsp_event_callback_t	callback_p
	)

Function for initializing BSP.

Initialize the board support package to allow state indication and button reaction. Default events are assigned to buttons.

Note

Before calling this function, you must initiate the following required modules:

Application Timer for LED support
GPIOTE Handler for button support
UART module for UART support

Parameters

[in]	type	Type of peripherals used.
[in]	ticks_per_100ms	Number of RTC ticks for 100 ms.
[in]	callback_p	Function to be called when button press/event is detected.

Return values

NRF_SUCCESS	BSP module was successfully initialized.
NRF_ERROR_INVALID_STATE	Application timer module has not been initialized.
NRF_ERROR_NO_MEM	Maximum number of timers has already been reached.
NRF_ERROR_INVALID_PARAM	GPIOTE has too many users.
NRF_ERROR_INVALID_STATE	Button or GPIOTE not initialized.

Macros

Typedefs

Enumerations

Functions

Detailed Description

Macro Definition Documentation

Typedef Documentation

Enumeration Type Documentation

Function Documentation