Definitions and prototypes for the GATT Client interface. More...

Modules
	Message Sequence Charts

	Defines

Data Structures
struct	ble_gattc_handle_range_t
	Operation Handle Range. More...

struct	ble_gattc_service_t
	GATT service. More...

struct	ble_gattc_include_t
	GATT include. More...

struct	ble_gattc_char_t
	GATT characteristic. More...

struct	ble_gattc_desc_t
	GATT descriptor. More...

struct	ble_gattc_write_params_t
	Write Parameters. More...

struct	ble_gattc_evt_prim_srvc_disc_rsp_t
	Event structure for BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP. More...

struct	ble_gattc_evt_rel_disc_rsp_t
	Event structure for BLE_GATTC_EVT_REL_DISC_RSP. More...

struct	ble_gattc_evt_char_disc_rsp_t
	Event structure for BLE_GATTC_EVT_CHAR_DISC_RSP. More...

struct	ble_gattc_evt_desc_disc_rsp_t
	Event structure for BLE_GATTC_EVT_DESC_DISC_RSP. More...

struct	ble_gattc_handle_value_t
	GATT read by UUID handle value pair. More...

struct	ble_gattc_evt_char_val_by_uuid_read_rsp_t
	Event structure for BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP. More...

struct	ble_gattc_evt_read_rsp_t
	Event structure for BLE_GATTC_EVT_READ_RSP. More...

struct	ble_gattc_evt_char_vals_read_rsp_t
	Event structure for BLE_GATTC_EVT_CHAR_VALS_READ_RSP. More...

struct	ble_gattc_evt_write_rsp_t
	Event structure for BLE_GATTC_EVT_WRITE_RSP. More...

struct	ble_gattc_evt_hvx_t
	Event structure for BLE_GATTC_EVT_HVX. More...

struct	ble_gattc_evt_timeout_t
	Event structure for BLE_GATTC_EVT_TIMEOUT. More...

struct	ble_gattc_evt_t
	GATTC event type. More...

Enumerations
enum	BLE_GATTC_SVCS { SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER = 0x90, SD_BLE_GATTC_RELATIONSHIPS_DISCOVER, SD_BLE_GATTC_CHARACTERISTICS_DISCOVER, SD_BLE_GATTC_DESCRIPTORS_DISCOVER, SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ, SD_BLE_GATTC_READ, SD_BLE_GATTC_CHAR_VALUES_READ, SD_BLE_GATTC_WRITE, SD_BLE_GATTC_HV_CONFIRM }
	GATTC API SVC numbers. More...

enum	BLE_GATTC_EVTS { BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP = 0x30, BLE_GATTC_EVT_REL_DISC_RSP, BLE_GATTC_EVT_CHAR_DISC_RSP, BLE_GATTC_EVT_DESC_DISC_RSP, BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP, BLE_GATTC_EVT_READ_RSP, BLE_GATTC_EVT_CHAR_VALS_READ_RSP, BLE_GATTC_EVT_WRITE_RSP, BLE_GATTC_EVT_HVX, BLE_GATTC_EVT_TIMEOUT }
	GATT Client Event IDs. More...

Functions
uint32_t	sd_ble_gattc_primary_services_discover (uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *const p_srvc_uuid)
	Initiate or continue a GATT Primary Service Discovery procedure. More...

uint32_t	sd_ble_gattc_relationships_discover (uint16_t conn_handle, ble_gattc_handle_range_t const *const p_handle_range)
	Initiate or continue a GATT Relationship Discovery procedure. More...

uint32_t	sd_ble_gattc_characteristics_discover (uint16_t conn_handle, ble_gattc_handle_range_t const *const p_handle_range)
	Initiate or continue a GATT Characteristic Discovery procedure. More...

uint32_t	sd_ble_gattc_descriptors_discover (uint16_t conn_handle, ble_gattc_handle_range_t const *const p_handle_range)
	Initiate or continue a GATT Characteristic Descriptor Discovery procedure. More...

uint32_t	sd_ble_gattc_char_value_by_uuid_read (uint16_t conn_handle, ble_uuid_t const const p_uuid, ble_gattc_handle_range_t const const p_handle_range)
	Initiate or continue a GATT Read using Characteristic UUID procedure. More...

uint32_t	sd_ble_gattc_read (uint16_t conn_handle, uint16_t handle, uint16_t offset)
	Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure. More...

uint32_t	sd_ble_gattc_char_values_read (uint16_t conn_handle, uint16_t const *const p_handles, uint16_t handle_count)
	Initiate a GATT Read Multiple Characteristic Values procedure. More...

uint32_t	sd_ble_gattc_write (uint16_t conn_handle, ble_gattc_write_params_t const *const p_write_params)
	Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure. More...

uint32_t	sd_ble_gattc_hv_confirm (uint16_t conn_handle, uint16_t handle)
	Send a Handle Value Confirmation to the GATT Server. More...

Detailed Description

Definitions and prototypes for the GATT Client interface.

Enumeration Type Documentation

enum BLE_GATTC_EVTS

GATT Client Event IDs.

Enumerator
BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP	Primary Service Discovery Response event.
BLE_GATTC_EVT_REL_DISC_RSP	Relationship Discovery Response event.
BLE_GATTC_EVT_CHAR_DISC_RSP	Characteristic Discovery Response event.
BLE_GATTC_EVT_DESC_DISC_RSP	Descriptor Discovery Response event.
BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP	Read By UUID Response event.
BLE_GATTC_EVT_READ_RSP	Read Response event.
BLE_GATTC_EVT_CHAR_VALS_READ_RSP	Read multiple Response event.
BLE_GATTC_EVT_WRITE_RSP	Write Response event.
BLE_GATTC_EVT_HVX	Handle Value Notification or Indication event.
BLE_GATTC_EVT_TIMEOUT	Timeout event.

enum BLE_GATTC_SVCS

GATTC API SVC numbers.

Enumerator
SD_BLE_GATTC_PRIMARY_SERVICES_DISCOVER	Primary Service Discovery.
SD_BLE_GATTC_RELATIONSHIPS_DISCOVER	Relationship Discovery.
SD_BLE_GATTC_CHARACTERISTICS_DISCOVER	Characteristic Discovery.
SD_BLE_GATTC_DESCRIPTORS_DISCOVER	Characteristic Descriptor Discovery.
SD_BLE_GATTC_CHAR_VALUE_BY_UUID_READ	Read Characteristic Value by UUID.
SD_BLE_GATTC_READ	Generic read.
SD_BLE_GATTC_CHAR_VALUES_READ	Read multiple Characteristic Values.
SD_BLE_GATTC_WRITE	Generic write.
SD_BLE_GATTC_HV_CONFIRM	Handle Value Confirmation.

Function Documentation

uint32_t sd_ble_gattc_char_value_by_uuid_read	(	uint16_t	conn_handle,
		ble_uuid_t const *const	p_uuid,
		ble_gattc_handle_range_t const *const	p_handle_range
	)

Initiate or continue a GATT Read using Characteristic UUID procedure.

This function initiates the Read using Characteristic UUID procedure. If the last Characteristic has not been reached, this must be called again with an updated handle range to continue the discovery.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_uuid	Pointer to a Characteristic value UUID to read.
[in]	p_handle_range	A pointer to the range of handles to perform this procedure on.

Returns: NRF_SUCCESS Successfully started or resumed the Read using Characteristic UUID procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_char_values_read	(	uint16_t	conn_handle,
		uint16_t const *const	p_handles,
		uint16_t	handle_count
	)

Initiate a GATT Read Multiple Characteristic Values procedure.

This function initiates a GATT Read Multiple Characteristic Values procedure.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handles	A pointer to the handle(s) of the attribute(s) to be read.
[in]	handle_count	The number of handles in p_handles.

Returns: NRF_SUCCESS Successfully started the Read Multiple Characteristic Values procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_characteristics_discover	(	uint16_t	conn_handle,
		ble_gattc_handle_range_t const *const	p_handle_range
	)

Initiate or continue a GATT Characteristic Discovery procedure.

This function initiates a Characteristic discovery procedure. If the last Characteristic has not been reached, this must be called again with an updated handle range to continue the discovery.

Note: If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handle_range	A pointer to the range of handles of the Service to perform this procedure on.

Returns: NRF_SUCCESS Successfully started or resumed the Characteristic Discovery procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_descriptors_discover	(	uint16_t	conn_handle,
		ble_gattc_handle_range_t const *const	p_handle_range
	)

Initiate or continue a GATT Characteristic Descriptor Discovery procedure.

This function initiates the Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached, this must be called again with an updated handle range to continue the discovery.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handle_range	A pointer to the range of handles of the Characteristic to perform this procedure on.

Returns: NRF_SUCCESS Successfully started or resumed the Descriptor Discovery procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_hv_confirm	(	uint16_t	conn_handle,
		uint16_t	handle
	)

Send a Handle Value Confirmation to the GATT Server.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	handle	The handle of the attribute in the indication.

Returns: NRF_SUCCESS Successfully queued the Handle Value Confirmation for transmission.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_STATE No Indication pending to be confirmed.; BLE_ERROR_INVALID_ATTR_HANDLE Invalid attribute handle.; BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.

uint32_t sd_ble_gattc_primary_services_discover	(	uint16_t	conn_handle,
		uint16_t	start_handle,
		ble_uuid_t const *const	p_srvc_uuid
	)

Initiate or continue a GATT Primary Service Discovery procedure.

This function initiates a Primary Service discovery, starting from the supplied handle. If the last service has not been reached, this must be called again with an updated start handle value to continue the search.

Note: If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	start_handle	Handle to start searching from.
[in]	p_srvc_uuid	Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.

Returns: NRF_SUCCESS Successfully started or resumed the Primary Service Discovery procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_read	(	uint16_t	conn_handle,
		uint16_t	handle,
		uint16_t	offset
	)

Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.

This function initiates a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor to be read is longer than GATT_MTU - 1, this function must be called multiple times with appropriate offset to read the complete value.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	handle	The handle of the attribute to be read.
[in]	offset	Offset into the attribute value to be read.

Returns: NRF_SUCCESS Successfully started or resumed the Read (Long) procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_relationships_discover	(	uint16_t	conn_handle,
		ble_gattc_handle_range_t const *const	p_handle_range
	)

Initiate or continue a GATT Relationship Discovery procedure.

This function initiates the Find Included Services sub-procedure. If the last included service has not been reached, this must be called again with an updated handle range to continue the search.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handle_range	A pointer to the range of handles of the Service to perform this procedure on.

Returns: NRF_SUCCESS Successfully started or resumed the Relationship Discovery procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.; NRF_ERROR_BUSY Client procedure already in progress.

uint32_t sd_ble_gattc_write	(	uint16_t	conn_handle,
		ble_gattc_write_params_t const *const	p_write_params
	)

Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.

This function can perform all write procedures described in GATT.

Note: It is important to note that a write without response will consume an application buffer, and will therefore generate a BLE_EVT_TX_COMPLETE event when the packet has been transmitted. A write on the other hand will use the standard client internal buffer and thus will only generate a BLE_GATTC_EVT_WRITE_RSP event as soon as the write response has been received from the peer. Please see the documentation of sd_ble_tx_buffer_count_get for more details.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_write_params	A pointer to a write parameters structure.

Returns: NRF_SUCCESS Successfully started the Write procedure.; BLE_ERROR_INVALID_CONN_HANDLE Invalid Connection Handle.; NRF_ERROR_INVALID_ADDR Invalid pointer supplied.; NRF_ERROR_INVALID_PARAM Invalid parameter(s) supplied.; NRF_ERROR_DATA_SIZE Invalid data size(s) supplied.; NRF_ERROR_BUSY Procedure already in progress.; BLE_ERROR_NO_TX_BUFFERS There are no available buffers left.

Modules

Data Structures

Enumerations

Functions

Detailed Description

Enumeration Type Documentation

Function Documentation