nRF51 SDK - S120 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages

Data Structures

struct  nrf_ecb_hal_data_t
 AES ECB data structure. More...
 

Typedefs

typedef volatile uint8_t nrf_mutex_t
 Represents a mutex for use with the nrf_mutex functions. More...
 
typedef uint8_t nrf_app_irq_priority_t
 The interrupt priorities available to the application while the softdevice is active.
 
typedef uint8_t nrf_power_mode_t
 Represents a power mode, used in power mode functions.
 
typedef uint8_t nrf_power_failure_threshold_t
 Represents a power failure threshold value.
 
typedef uint32_t nrf_power_dcdc_mode_t
 Represents a DCDC mode value.
 
typedef uint8_t nrf_radio_notification_distance_t
 Radio notification distances.
 
typedef uint8_t nrf_radio_notification_type_t
 Radio notification types.
 

Enumerations

enum  NRF_SOC_SVCS {
  SD_FLASH_PAGE_ERASE = 0x20,
  SD_FLASH_WRITE,
  SD_FLASH_PROTECT,
  SD_MUTEX_NEW = 0x23,
  SD_MUTEX_ACQUIRE,
  SD_MUTEX_RELEASE,
  SD_NVIC_ENABLEIRQ,
  SD_NVIC_DISABLEIRQ,
  SD_NVIC_GETPENDINGIRQ,
  SD_NVIC_SETPENDINGIRQ,
  SD_NVIC_CLEARPENDINGIRQ,
  SD_NVIC_SETPRIORITY,
  SD_NVIC_GETPRIORITY,
  SD_NVIC_SYSTEMRESET,
  SD_NVIC_CRITICAL_REGION_ENTER,
  SD_NVIC_CRITICAL_REGION_EXIT,
  SD_RAND_APPLICATION_POOL_CAPACITY,
  SD_RAND_APPLICATION_BYTES_AVAILABLE,
  SD_RAND_APPLICATION_GET_VECTOR,
  SD_POWER_MODE_SET,
  SD_POWER_SYSTEM_OFF,
  SD_POWER_RESET_REASON_GET,
  SD_POWER_RESET_REASON_CLR,
  SD_POWER_POF_ENABLE,
  SD_POWER_POF_THRESHOLD_SET,
  SD_POWER_RAMON_SET,
  SD_POWER_RAMON_CLR,
  SD_POWER_RAMON_GET,
  SD_POWER_GPREGRET_SET,
  SD_POWER_GPREGRET_CLR,
  SD_POWER_GPREGRET_GET,
  SD_POWER_DCDC_MODE_SET,
  SD_APP_EVT_WAIT,
  SD_CLOCK_HFCLK_REQUEST,
  SD_CLOCK_HFCLK_RELEASE,
  SD_CLOCK_HFCLK_IS_RUNNING,
  SD_PPI_CHANNEL_ENABLE_GET,
  SD_PPI_CHANNEL_ENABLE_SET,
  SD_PPI_CHANNEL_ENABLE_CLR,
  SD_PPI_CHANNEL_ASSIGN,
  SD_PPI_GROUP_TASK_ENABLE,
  SD_PPI_GROUP_TASK_DISABLE,
  SD_PPI_GROUP_ASSIGN,
  SD_PPI_GROUP_GET,
  SD_RADIO_NOTIFICATION_CFG_SET,
  SD_ECB_BLOCK_ENCRYPT,
  SD_RESERVED1,
  SD_RESERVED2,
  SD_RESERVED3,
  SD_EVT_GET,
  SD_TEMP_GET,
  SVC_SOC_LAST
}
 The SVC numbers used by the SVC functions in the SoC library.
 
enum  NRF_MUTEX_VALUES {
  NRF_MUTEX_FREE,
  NRF_MUTEX_TAKEN
}
 Possible values of a nrf_mutex_t.
 
enum  NRF_APP_PRIORITIES {
  NRF_APP_PRIORITY_HIGH = 1,
  NRF_APP_PRIORITY_LOW = 3
}
 Possible values of nrf_app_irq_priority_t.
 
enum  NRF_POWER_MODES {
  NRF_POWER_MODE_CONSTLAT,
  NRF_POWER_MODE_LOWPWR
}
 Possible values of nrf_power_mode_t. More...
 
enum  NRF_POWER_THRESHOLDS {
  NRF_POWER_THRESHOLD_V21,
  NRF_POWER_THRESHOLD_V23,
  NRF_POWER_THRESHOLD_V25,
  NRF_POWER_THRESHOLD_V27
}
 Possible values of nrf_power_failure_threshold_t. More...
 
enum  NRF_POWER_DCDC_MODES {
  NRF_POWER_DCDC_MODE_OFF,
  NRF_POWER_DCDC_MODE_ON,
  NRF_POWER_DCDC_MODE_AUTOMATIC
}
 Possible values of nrf_power_dcdc_mode_t. More...
 
enum  NRF_RADIO_NOTIFICATION_DISTANCES {
  NRF_RADIO_NOTIFICATION_DISTANCE_NONE = 0,
  NRF_RADIO_NOTIFICATION_DISTANCE_800US,
  NRF_RADIO_NOTIFICATION_DISTANCE_1740US,
  NRF_RADIO_NOTIFICATION_DISTANCE_2680US,
  NRF_RADIO_NOTIFICATION_DISTANCE_3620US,
  NRF_RADIO_NOTIFICATION_DISTANCE_4560US,
  NRF_RADIO_NOTIFICATION_DISTANCE_5500US
}
 Possible values of nrf_radio_notification_distance_t. More...
 
enum  NRF_RADIO_NOTIFICATION_TYPES {
  NRF_RADIO_NOTIFICATION_TYPE_NONE = 0,
  NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE,
  NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE,
  NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH
}
 Possible values of nrf_radio_notification_type_t. More...
 
enum  NRF_SOC_EVTS {
  NRF_EVT_HFCLKSTARTED,
  NRF_EVT_POWER_FAILURE_WARNING,
  NRF_EVT_FLASH_OPERATION_SUCCESS,
  NRF_EVT_FLASH_OPERATION_ERROR,
  NRF_EVT_RESERVED1,
  NRF_EVT_RESERVED2,
  NRF_EVT_RESERVED3,
  NRF_EVT_RESERVED4,
  NRF_EVT_RESERVED5,
  NRF_EVT_NUMBER_OF_EVTS
}
 SoC Events. More...
 

Detailed Description

Typedef Documentation

typedef volatile uint8_t nrf_mutex_t

Represents a mutex for use with the nrf_mutex functions.

Note
Accessing the value directly is not safe, use the mutex functions!

Enumeration Type Documentation

Possible values of nrf_power_dcdc_mode_t.

Enumerator
NRF_POWER_DCDC_MODE_OFF 

The DCDC is always off.

NRF_POWER_DCDC_MODE_ON 

The DCDC is always on.

NRF_POWER_DCDC_MODE_AUTOMATIC 

The DCDC is automatically managed.

Possible values of nrf_power_mode_t.

Enumerator
NRF_POWER_MODE_CONSTLAT 

Constant latency mode. See power management in the reference manual.

NRF_POWER_MODE_LOWPWR 

Low power mode. See power management in the reference manual.

Possible values of nrf_power_failure_threshold_t.

Enumerator
NRF_POWER_THRESHOLD_V21 

2.1 Volts power failure threshold.

NRF_POWER_THRESHOLD_V23 

2.3 Volts power failure threshold.

NRF_POWER_THRESHOLD_V25 

2.5 Volts power failure threshold.

NRF_POWER_THRESHOLD_V27 

2.7 Volts power failure threshold.

Possible values of nrf_radio_notification_distance_t.

Enumerator
NRF_RADIO_NOTIFICATION_DISTANCE_NONE 

The event does not have a notification.

NRF_RADIO_NOTIFICATION_DISTANCE_800US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_1740US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_2680US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_3620US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_4560US 

The distance from the active notification to start of radio activity.

NRF_RADIO_NOTIFICATION_DISTANCE_5500US 

The distance from the active notification to start of radio activity.

Possible values of nrf_radio_notification_type_t.

Enumerator
NRF_RADIO_NOTIFICATION_TYPE_NONE 

The event does not have a radio notification signal.

NRF_RADIO_NOTIFICATION_TYPE_INT_ON_ACTIVE 

Using interrupt for notification when the radio will be enabled.

NRF_RADIO_NOTIFICATION_TYPE_INT_ON_INACTIVE 

Using interrupt for notification when the radio has been disabled.

NRF_RADIO_NOTIFICATION_TYPE_INT_ON_BOTH 

Using interrupt for notification both when the radio will be enabled and disabled.

SoC Events.

Enumerator
NRF_EVT_HFCLKSTARTED 

Event indicating that the HFCLK has started.

NRF_EVT_POWER_FAILURE_WARNING 

Event indicating that a power failure warning has occurred.

NRF_EVT_FLASH_OPERATION_SUCCESS 

Event indicating that the ongoing flash operation has completed successfully.

NRF_EVT_FLASH_OPERATION_ERROR 

Event indicating that the ongoing flash operation has timed out with an error.