nRF51 SDK
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Functions
Functions
SoftDevice Manager API

Functions

uint32_t sd_softdevice_enable (nrf_clock_lfclksrc_t clock_source, softdevice_assertion_handler_t assertion_handler)
 Enables the SoftDevice and by extension the protocol stack. More...
 
uint32_t sd_softdevice_disable (void)
 Disables the SoftDevice and by extension the protocol stack. More...
 
uint32_t sd_softdevice_is_enabled (uint8_t *p_softdevice_enabled)
 Check if the SoftDevice is enabled. More...
 
uint32_t sd_softdevice_forward_to_application (void)
 Start forwarding interrupts to application. More...
 

Detailed Description

Function Documentation

uint32_t sd_softdevice_disable ( void  )

Disables the SoftDevice and by extension the protocol stack.

Idempotent function to disable the SoftDevice.

Postcondition
SoC library and protocol stack APIs are made unavailable.
All interrupts that was protected by the SoftDevice will be disabled and initialized to priority 0 (highest).
All peripherals used by the SoftDevice will be reset to default values.
All of RAM become available.
All interrupts are forwarded to the application.
LFCLK source chosen in sd_softdevice_enable will be left running.
Return values
NRF_SUCCESS
uint32_t sd_softdevice_enable ( nrf_clock_lfclksrc_t  clock_source,
softdevice_assertion_handler_t  assertion_handler 
)

Enables the SoftDevice and by extension the protocol stack.

Idempotent function to enable the SoftDevice.

Note
Some care must be taken if a low frequency clock source is already running when calling this function: If the LF clock has a different source then the one currently running, it will be stopped. Then, the new clock source will be started.
This function has no effect when returning with an error.
Postcondition
If return code is NRF_SUCCESS
  • SoC library and protocol stack APIs are made available
  • A portion of RAM will be unavailable (see relevant SDS documentation)
  • Some peripherals will be unavailable or available only through the SoC API (see relevant SDS documentation)
  • Interrupts will not arrive from protected peripherals or interrupts
  • nrf_nvic_ functions must be used instead of CMSIS NVIC_ functions for reliable usage of the softdevice.
  • Interrupt latency may be affected by the SoftDevice (see relevant SDS documentation)
  • Chosen low frequency clock source will be running
Parameters
clock_sourceLow frequency clock source and accuracy. (Note: In the case of XTAL source, the PPM accuracy of the chosen clock source must be greater than or equal to the actual characteristics of your XTAL clock).
assertion_handlerCallback for SoftDevice assertions.
Return values
NRF_SUCCESS
NRF_ERROR_SDM_INCORRECT_INTERRUPT_CONFIGURATIONSoftDeviceinterrupt is already enabled, or an enabled interrupt has an illegal priority level
NRF_ERROR_SDM_LFCLK_SOURCE_UNKNOWNUnknown low frequency clock source selected
uint32_t sd_softdevice_forward_to_application ( void  )

Start forwarding interrupts to application.

This function is only intended to be called when a bootloader is enabled is used. The bootloader should call this right before it starts the application. It is recommended that all interrupt sources are off when this is called, or you could end up having interrupts in the application being executed before main() of the application.

Return values
NRF_SUCCESS
uint32_t sd_softdevice_is_enabled ( uint8_t *  p_softdevice_enabled)

Check if the SoftDevice is enabled.

Parameters
[out]p_softdevice_enabledIf the SoftDevice is enabled: 1 else 0.
Return values
NRF_SUCCESS