Health Thermometer Service

Health Thermometer Service module. More...

Data Structures
struct	ble_hts_evt_t
	Health Thermometer Service event. More...
struct	ieee_float32_t
	FLOAT format (IEEE-11073 32-bit FLOAT, defined as a 32-bit value with a 24-bit mantissa and an 8-bit exponent. More...
struct	ble_hts_init_t
	Health Thermometer Service init structure. This contains all options and data needed for initialization of the service. More...
struct	ble_hts_s
	Health Thermometer Service structure. This contains various status information for the service. More...
struct	ble_hts_meas_s
	Health Thermometer Service measurement structure. This contains a Health Thermometer measurement. More...

Macros
#define	BLE_HTS_TEMP_TYPE_ARMPIT   1
#define	BLE_HTS_TEMP_TYPE_BODY   2
#define	BLE_HTS_TEMP_TYPE_EAR   3
#define	BLE_HTS_TEMP_TYPE_FINGER   4
#define	BLE_HTS_TEMP_TYPE_GI_TRACT   5
#define	BLE_HTS_TEMP_TYPE_MOUTH   6
#define	BLE_HTS_TEMP_TYPE_RECTUM   7
#define	BLE_HTS_TEMP_TYPE_TOE   8
#define	BLE_HTS_TEMP_TYPE_EAR_DRUM   9

Typedefs
typedef struct ble_hts_s	ble_hts_t
	Health Thermometer Service structure. This contains various status information for the service.
typedef void(*	ble_hts_evt_handler_t )(ble_hts_t *p_hts, ble_hts_evt_t *p_evt)
	Health Thermometer Service event handler type.
typedef struct ble_hts_meas_s	ble_hts_meas_t
	Health Thermometer Service measurement structure. This contains a Health Thermometer measurement.

Enumerations
enum	ble_hts_evt_type_t { BLE_HTS_EVT_INDICATION_ENABLED, BLE_HTS_EVT_INDICATION_DISABLED, BLE_HTS_EVT_INDICATION_CONFIRMED }
	Health Thermometer Service event type. More...

Functions
uint32_t	ble_hts_init (ble_hts_t *p_hts, const ble_hts_init_t *p_hts_init)
	Function for initializing the Health Thermometer Service. More...
void	ble_hts_on_ble_evt (ble_hts_t *p_hts, ble_evt_t *p_ble_evt)
	Function for handling the Application's BLE Stack events. More...
uint32_t	ble_hts_measurement_send (ble_hts_t *p_hts, ble_hts_meas_t *p_hts_meas)
	Function for sending health thermometer measurement if indication has been enabled. More...
uint32_t	ble_hts_is_indication_enabled (ble_hts_t *p_hts, bool *p_indication_enabled)
	Function for checking if indication of Temperature Measurement is currently enabled. More...

Detailed Description

Health Thermometer Service module.

This module implements the Health Thermometer Service.

     If an event handler is supplied by the application, the Health Thermometer 
     Service will generate Health Thermometer Service events to the application.

Note

The application must propagate BLE stack events to the Health Thermometer Service module by calling ble_hts_on_ble_evt() from the from the ble_stack_handler function.

Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.

Enumeration Type Documentation

enum ble_hts_evt_type_t

Health Thermometer Service event type.

Enumerator
BLE_HTS_EVT_INDICATION_ENABLED	Health Thermometer value indication enabled event.
BLE_HTS_EVT_INDICATION_DISABLED	Health Thermometer value indication disabled event.
BLE_HTS_EVT_INDICATION_CONFIRMED	Confirmation of a temperature measurement indication has been received.

Function Documentation

uint32_t ble_hts_init	(	ble_hts_t *	p_hts,
		const ble_hts_init_t *	p_hts_init
	)

Function for initializing the Health Thermometer Service.

Parameters

[out]	p_hts	Health Thermometer Service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify this particular service instance.
[in]	p_hts_init	Information needed to initialize the service.

Returns

NRF_SUCCESS on successful initialization of service, otherwise an error code.

uint32_t ble_hts_is_indication_enabled	(	ble_hts_t *	p_hts,
		bool *	p_indication_enabled
	)

Function for checking if indication of Temperature Measurement is currently enabled.

Parameters

[in]	p_hts	Health Thermometer Service structure.
[out]	p_indication_enabled	TRUE if indication is enabled, FALSE otherwise.

Returns

NRF_SUCCESS on success, otherwise an error code.

uint32_t ble_hts_measurement_send	(	ble_hts_t *	p_hts,
		ble_hts_meas_t *	p_hts_meas
	)

Function for sending health thermometer measurement if indication has been enabled.

The application calls this function after having performed a Health Thermometer measurement. If indication has been enabled, the measurement data is encoded and sent to the client.

Parameters

[in]	p_hts	Health Thermometer Service structure.
[in]	p_hts_meas	Pointer to new health thermometer measurement.

Returns

NRF_SUCCESS on success, otherwise an error code.

void ble_hts_on_ble_evt	(	ble_hts_t *	p_hts,
		ble_evt_t *	p_ble_evt
	)

Function for handling the Application's BLE Stack events.

Handles all events from the BLE stack of interest to the Health Thermometer Service.

Parameters

[in]	p_hts	Health Thermometer Service structure.
[in]	p_ble_evt	Event received from the BLE stack.