Nordic User Datagram Protocol Application Interface for Nordic's IPv6 stack.
More...
Nordic User Datagram Protocol Application Interface for Nordic's IPv6 stack.
This module provides basic features related to User Datagram Protocol (UDP) support.
UDP data receive callback.
API used to notify the application of UDP packets received. If the received data is malformed (for example, a checksum error), the packet is still notified to the application. The process_result parameter indicates whether the packet was successfully processed by UDP. The application should check process_result before consuming the packet.
- Parameters
-
[in] | p_socket | Reference to the socket on which the data is received. |
[in] | p_ip6_header | Pointer to the IP header of the received ICMP packet. |
[in] | p_udp_header | Pointer to the UDP header of the received packet. |
[in] | process_result | Notifies the application if the UDP packet was processed successfully success or if an error occurred, for example, the packet was malformed. |
[in] | p_rx_packet | Packet buffer containing the received packed. p_rx_packet->p_payload contains the UDP payload. |
- Returns
- A provision for the application to notify the module of whether the received packet was processed successfully by application. Currently not used.
Allocates a UDP socket.
This API should be called to be assigned a UDP socket. The maximum number of sockets that can be allocated using the API is determined by the define UDP6_MAX_SOCKET_COUNT.
- Parameters
-
[out] | p_socket | Reference to the allocated socket is provided in the pointer if the procedure was successful. Should not be NULL. |
- Return values
-
NRF_SUCCESS | If the socket was allocated successfully. Otherwise, an error code that indicates the reason for the failure is returned. |
uint32_t udp6_socket_app_data_set |
( |
const udp6_socket_t * |
p_socket | ) |
|
Sets application data for a socket.
A utility API that allows the application to set any application specific mapping with the UDP Socket. The UDP module remembers the pointer provided by the application as long as the socket is not freed and if receive data callback is called each time as part of udp_socket_t.
- Parameters
-
[in] | p_socket | Pointer to the socket for which the application data mapping is being set. A pointer to the application data should be provided by setting the p_socket->p_app_data field. |
- Return values
-
NRF_SUCCESS | If the procedure was executed successfully. Otherwise, an error code that indicates the reason for the failure is returned. |
Binds a UDP socket to a specific port and address.
API used to bind a UDP socket to a local port and an address.
- Parameters
-
[in] | p_socket | Handle reference to the socket. Should not be NULL. |
[in] | p_src_addr | Local IPv6 address to be bound on specific socket. |
[in] | src_port | Local UDP port to be bound on specific socket. |
- Return values
-
NRF_SUCCESS | If the procedure was executed successfully. Otherwise, an error code that indicates the reason for the failure is returned. |
Connects a UDP socket to aspecific port and address.
API used to connect a UDP socket to a remote port and remote address.
- Parameters
-
[in] | p_socket | Handle reference to the socket. Should not be NULL. |
[in] | p_dest_addr | IPv6 address of the remote destination. |
[in] | dest_port | Remote USP port to connect the socket to. |
- Return values
-
NRF_SUCCESS | If the connection was established successfully. |
Frees an allocated UDP socket.
API used to free a socket allocated using udp6_socket_allocate.
- Parameters
-
[in] | p_socket | Handle reference to the socket. Should not be NULL. |
- Return values
-
NRF_SUCCESS | If the socket was freed successfully. Otherwise, an error code that indicates the reason for the failure is returned. |
Registers callback to be notified of data received on a socket.
API to register a callback to be notified of data received on a socket.
- Parameters
-
[in] | p_socket | Handle reference to the socket. Should not be NULL. |
[in] | callback | Callback being registered to receive data. Should not be NULL. |
- Return values
-
NRF_SUCCESS | If the procedure was executed successfully. Otherwise, an error code that indicates the reason for the failure is returned. |
Sends a UDP packet on a specific socket.
API used to send UDP data over a UDP socket. Remote port and address must be set with udp6_socket_connect() before using this API.
Applications that call this function should allocate a packet with type UDP6_PACKET_TYPE (set in the allocation parameter) before calling the function.
The application shall not free the allocated packet buffer if the procedure was successful, to ensure that no data copies are needed when transmitting a packet.
- Parameters
-
[in] | p_socket | Handle reference to the socket. Should not be NULL. |
[in] | p_packet | Data to be transmitted on the socket. The application should allocate a packet buffer with type UDP6_PACKET_TYPE using iot_pbuffer_allocate. p_packet->p_payload and p_packet->length should be appropriately populated by the application to contain the payload and length of the UDP packet, respectively. |
- Return values
-
NRF_SUCCESS | If the procedure was executed successfully. Otherwise, an error code that indicates the reason for the failure is returned. |
Sends a UDP packet on a specific socket to a remote address and port.
API used to send UDP data over a UDP socket.
- Parameters
-
[in] | p_socket | Handle reference to the socket. Should not be NULL. |
[in] | p_dest_addr | IPv6 address of the remote destination. |
[in] | dest_port | Remote UDP port to which data transmission is requested. |
[in] | p_packet | Data to be transmitted on the socket. Application should allocate a packet buffer with type UDP6_PACKET_TYPE using iot_pbuffer_allocate. p_packet->p_payload and p_packet->length should be appropriately populated by the application to contain the payload and length of the UDP packet, respectively. |
- Return values
-
NRF_SUCCESS | If the procedure was executed successfully. Otherwise, an error code that indicates the reason for the failure is returned. |