nRF51 SDK - S130 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Board Support Package: BLE Button Module

Module for controlling BLE behavior through button actions. More...

Typedefs

typedef void(* bsp_btn_ble_error_handler_t )(uint32_t nrf_error)
 BLE Button Module error handler type.
 

Functions

uint32_t bsp_btn_ble_init (bsp_btn_ble_error_handler_t error_handler, bsp_event_t *p_startup_bsp_evt)
 Function for initializing the BLE Button Module. More...
 
uint32_t bsp_btn_ble_sleep_mode_prepare (void)
 Function for setting up wakeup buttons before going into sleep mode. More...
 
void bsp_btn_ble_on_ble_evt (ble_evt_t *p_ble_evt)
 Function for handling the application's BLE stack events. More...
 

Detailed Description

Module for controlling BLE behavior through button actions.

The application must propagate BLE events to the BLE Button Module. Based on these events, the BLE Button Module configures the Board Support Package to generate BSP events for certain button actions. These BSP events should then be handled by the application's BSP event handler.

Function Documentation

uint32_t bsp_btn_ble_init ( bsp_btn_ble_error_handler_t  error_handler,
bsp_event_t p_startup_bsp_evt 
)

Function for initializing the BLE Button Module.

Before calling this function, the BSP module must be initialized with buttons.

Parameters
[out]error_handlerError handler to call in case of internal errors in BLE Button Module.
[out]p_startup_bsp_evtIf not a NULL pointer, the value is filled with an event (or BSP_EVENT_NOTHING) derived from the buttons pressed on startup. For example, if the bond delete wakeup button was pressed to wake up the device, *p_startup_bsp_evt is set to BSP_EVENT_CLEAR_BONDING_DATA.
Return values
NRF_SUCCESSIf initialization was successful. Otherwise, a propagated error code is returned.
void bsp_btn_ble_on_ble_evt ( ble_evt_t p_ble_evt)

Function for handling the application's BLE stack events.

This function handles all events from the BLE stack that are of interest to this module.

Parameters
[in]p_ble_evtBLE stack event.
uint32_t bsp_btn_ble_sleep_mode_prepare ( void  )

Function for setting up wakeup buttons before going into sleep mode.

Return values
NRF_SUCCESSIf the buttons were prepared successfully. Otherwise, a propagated error code is returned.