nRF51 SDK - S130 SoftDevice
|
#define BLE_GATT_STATUS_ATTERR_APP_BEGIN 0x0180 |
ATT Error: Application range begin.
#define BLE_GATT_STATUS_ATTERR_APP_END 0x019F |
ATT Error: Application range end.
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_FOUND 0x010A |
ATT Error: Used in ATT as Attribute not found.
#define BLE_GATT_STATUS_ATTERR_ATTRIBUTE_NOT_LONG 0x010B |
ATT Error: Attribute cannot be read or written using read/write blob requests.
#define BLE_GATT_STATUS_ATTERR_CPS_CCCD_CONFIG_ERROR 0x01FD |
ATT Common Profile and Service Error: Client Characteristic Configuration Descriptor improperly configured.
#define BLE_GATT_STATUS_ATTERR_CPS_OUT_OF_RANGE 0x01FF |
ATT Common Profile and Service Error: Out Of Range.
#define BLE_GATT_STATUS_ATTERR_CPS_PROC_ALR_IN_PROG 0x01FE |
ATT Common Profile and Service Error: Procedure Already in Progress.
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHENTICATION 0x0105 |
ATT Error: Authenticated link required.
#define BLE_GATT_STATUS_ATTERR_INSUF_AUTHORIZATION 0x0108 |
ATT Error: Used in ATT as Insufficient Authorisation.
#define BLE_GATT_STATUS_ATTERR_INSUF_ENC_KEY_SIZE 0x010C |
ATT Error: Encryption key size used is insufficient.
#define BLE_GATT_STATUS_ATTERR_INSUF_ENCRYPTION 0x010F |
ATT Error: Encrypted link required.
#define BLE_GATT_STATUS_ATTERR_INSUF_RESOURCES 0x0111 |
ATT Error: Encrypted link required.
#define BLE_GATT_STATUS_ATTERR_INVALID 0x0100 |
ATT Error: Invalid Error Code.
#define BLE_GATT_STATUS_ATTERR_INVALID_ATT_VAL_LENGTH 0x010D |
ATT Error: Invalid value size.
#define BLE_GATT_STATUS_ATTERR_INVALID_HANDLE 0x0101 |
ATT Error: Invalid Attribute Handle.
#define BLE_GATT_STATUS_ATTERR_INVALID_OFFSET 0x0107 |
ATT Error: Offset specified was past the end of the attribute.
#define BLE_GATT_STATUS_ATTERR_INVALID_PDU 0x0104 |
ATT Error: Used in ATT as Invalid PDU.
#define BLE_GATT_STATUS_ATTERR_PREPARE_QUEUE_FULL 0x0109 |
ATT Error: Used in ATT as Prepare Queue Full.
#define BLE_GATT_STATUS_ATTERR_READ_NOT_PERMITTED 0x0102 |
ATT Error: Read not permitted.
#define BLE_GATT_STATUS_ATTERR_REQUEST_NOT_SUPPORTED 0x0106 |
ATT Error: Used in ATT as Request Not Supported.
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_BEGIN 0x0112 |
ATT Error: Reserved for Future Use range #1 begin.
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE1_END 0x017F |
ATT Error: Reserved for Future Use range #1 end.
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_BEGIN 0x01A0 |
ATT Error: Reserved for Future Use range #2 begin.
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE2_END 0x01DF |
ATT Error: Reserved for Future Use range #2 end.
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_BEGIN 0x01E0 |
ATT Error: Reserved for Future Use range #3 begin.
#define BLE_GATT_STATUS_ATTERR_RFU_RANGE3_END 0x01FC |
ATT Error: Reserved for Future Use range #3 end.
#define BLE_GATT_STATUS_ATTERR_UNLIKELY_ERROR 0x010E |
ATT Error: Very unlikely error.
#define BLE_GATT_STATUS_ATTERR_UNSUPPORTED_GROUP_TYPE 0x0110 |
ATT Error: Attribute type is not a supported grouping attribute.
#define BLE_GATT_STATUS_ATTERR_WRITE_NOT_PERMITTED 0x0103 |
ATT Error: Write not permitted.
#define BLE_GATT_STATUS_SUCCESS 0x0000 |
Success.
#define BLE_GATT_STATUS_UNKNOWN 0x0001 |
Unknown or not applicable status.