nRF51 SDK - S130 SoftDevice
|
Macros | |
#define | BLE_GAP_SEC_STATUS_SUCCESS 0x00 |
#define | BLE_GAP_SEC_STATUS_TIMEOUT 0x01 |
#define | BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 |
#define | BLE_GAP_SEC_STATUS_RFU_RANGE1_BEGIN 0x03 |
#define | BLE_GAP_SEC_STATUS_RFU_RANGE1_END 0x80 |
#define | BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 |
#define | BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 |
#define | BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 |
#define | BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 |
#define | BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 |
#define | BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 |
#define | BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 |
#define | BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 |
#define | BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 |
#define | BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A |
#define | BLE_GAP_SEC_STATUS_RFU_RANGE2_BEGIN 0x8B |
#define | BLE_GAP_SEC_STATUS_RFU_RANGE2_END 0xFF |
#define BLE_GAP_SEC_STATUS_AUTH_REQ 0x83 |
Authentication requirements not met.
#define BLE_GAP_SEC_STATUS_CONFIRM_VALUE 0x84 |
Confirm value failed.
#define BLE_GAP_SEC_STATUS_ENC_KEY_SIZE 0x86 |
Encryption key size.
#define BLE_GAP_SEC_STATUS_INVALID_PARAMS 0x8A |
Invalid parameters.
#define BLE_GAP_SEC_STATUS_OOB_NOT_AVAILABLE 0x82 |
Out of Band Key not available.
#define BLE_GAP_SEC_STATUS_PAIRING_NOT_SUPP 0x85 |
Pairing not supported.
#define BLE_GAP_SEC_STATUS_PASSKEY_ENTRY_FAILED 0x81 |
Passkey entry failed (user cancelled or other).
#define BLE_GAP_SEC_STATUS_PDU_INVALID 0x02 |
Invalid PDU received.
#define BLE_GAP_SEC_STATUS_REPEATED_ATTEMPTS 0x89 |
Too little time elapsed since last attempt.
#define BLE_GAP_SEC_STATUS_RFU_RANGE1_BEGIN 0x03 |
Reserved for Future Use range #1 begin.
#define BLE_GAP_SEC_STATUS_RFU_RANGE1_END 0x80 |
Reserved for Future Use range #1 end.
#define BLE_GAP_SEC_STATUS_RFU_RANGE2_BEGIN 0x8B |
Reserved for Future Use range #2 begin.
#define BLE_GAP_SEC_STATUS_RFU_RANGE2_END 0xFF |
Reserved for Future Use range #2 end.
#define BLE_GAP_SEC_STATUS_SMP_CMD_UNSUPPORTED 0x87 |
Unsupported SMP command.
#define BLE_GAP_SEC_STATUS_SUCCESS 0x00 |
Procedure completed with success.
#define BLE_GAP_SEC_STATUS_TIMEOUT 0x01 |
Procedure timed out.
#define BLE_GAP_SEC_STATUS_UNSPECIFIED 0x88 |
Unspecified reason.