nRF51 SDK - S130 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Utility Functions and Definitions

Various types and definitions available to all applications. More...

Data Structures

struct  uint8_array_t
 Byte array type. More...
 

Macros

#define STATIC_ASSERT(EXPR)   typedef char static_assert_failed[(EXPR) ? 1 : -1]
 Macro for doing static (i.e. compile time) assertion. More...
 
#define ROUNDED_DIV(A, B)   (((A) + ((B) / 2)) / (B))
 Perform rounded integer division (as opposed to truncating the result). More...
 
#define IS_POWER_OF_TWO(A)   ( ((A) != 0) && ((((A) - 1) & (A)) == 0) )
 Check if the integer provided is a power of two. More...
 
#define MSEC_TO_UNITS(TIME, RESOLUTION)   (((TIME) * 1000) / (RESOLUTION))
 To convert milliseconds to ticks. More...
 
#define CEIL_DIV(A, B)
 Perform integer division, making sure the result is rounded up. More...
 

Typedefs

typedef uint8_t uint16_le_t [2]
 type for holding an encoded (i.e. little endian) 16 bit unsigned integer.
 
typedef uint8_t uint32_le_t [4]
 type for holding an encoded (i.e. little endian) 32 bit unsigned integer.
 

Enumerations

enum  {
  UNIT_0_625_MS = 625,
  UNIT_1_25_MS = 1250,
  UNIT_10_MS = 10000
}
 

Functions

static __INLINE uint8_t uint16_encode (uint16_t value, uint8_t *p_encoded_data)
 Function for encoding a uint16 value. More...
 
static __INLINE uint8_t uint32_encode (uint32_t value, uint8_t *p_encoded_data)
 Function for encoding a uint32 value. More...
 
static __INLINE uint16_t uint16_decode (const uint8_t *p_encoded_data)
 Function for decoding a uint16 value. More...
 
static __INLINE uint32_t uint32_decode (const uint8_t *p_encoded_data)
 Function for decoding a uint32 value. More...
 
static __INLINE uint8_t battery_level_in_percent (const uint16_t mvolts)
 Function for converting the input voltage (in milli volts) into percentage of 3.0 Volts. More...
 
static __INLINE bool is_word_aligned (void *p)
 Function for checking if a pointer value is aligned to a 4 byte boundary. More...
 

Detailed Description

Various types and definitions available to all applications.

Macro Definition Documentation

#define CEIL_DIV (   A,
 
)
Value:
/*lint -save -e573 */ \
((((A) - 1) / (B)) + 1) \
/*lint -restore */

Perform integer division, making sure the result is rounded up.

One typical use for this is to compute the number of objects with size B is needed to hold A number of bytes.

Parameters
[in]ANumerator.
[in]BDenominator.
Returns
Integer result of dividing A by B, rounded up.
#define IS_POWER_OF_TWO (   A)    ( ((A) != 0) && ((((A) - 1) & (A)) == 0) )

Check if the integer provided is a power of two.

Parameters
[in]ANumber to be tested.
Returns
true if value is power of two.
false if value not power of two.
#define MSEC_TO_UNITS (   TIME,
  RESOLUTION 
)    (((TIME) * 1000) / (RESOLUTION))

To convert milliseconds to ticks.

Parameters
[in]TIMENumber of milliseconds to convert.
[in]RESOLUTIONUnit to be converted to in [us/ticks].
#define ROUNDED_DIV (   A,
 
)    (((A) + ((B) / 2)) / (B))

Perform rounded integer division (as opposed to truncating the result).

Parameters
[in]ANumerator.
[in]BDenominator.
Returns
Rounded (integer) result of dividing A by B.
#define STATIC_ASSERT (   EXPR)    typedef char static_assert_failed[(EXPR) ? 1 : -1]

Macro for doing static (i.e. compile time) assertion.

Note
If the assertion fails when compiling using Keil, the compiler will report error message "error: #94: the size of an array must be greater than zero" (while gcc will list the symbol static_assert_failed, making the error message more readable). If the supplied expression can not be evaluated at compile time, Keil will report "error: #28: expression must have a constant value".
The macro is intentionally implemented not using do while(0), allowing it to be used outside function blocks (e.g. close to global type- and variable declarations). If used in a code block, it must be used before any executable code in this block.
Parameters
[in]EXPRConstant expression to be verified.

Enumeration Type Documentation

anonymous enum
Enumerator
UNIT_0_625_MS 

Number of microseconds in 0.625 milliseconds.

UNIT_1_25_MS 

Number of microseconds in 1.25 milliseconds.

UNIT_10_MS 

Number of microseconds in 10 milliseconds.

Function Documentation

static __INLINE uint8_t battery_level_in_percent ( const uint16_t  mvolts)
static

Function for converting the input voltage (in milli volts) into percentage of 3.0 Volts.

The calculation is based on a linearized version of the battery's discharge curve. 3.0V returns 100% battery level. The limit for power failure is 2.1V and is considered to be the lower boundary.

The discharge curve for CR2032 is non-linear. In this model it is split into 4 linear sections:

  • Section 1: 3.0V - 2.9V = 100% - 42% (58% drop on 100 mV)
  • Section 2: 2.9V - 2.74V = 42% - 18% (24% drop on 160 mV)
  • Section 3: 2.74V - 2.44V = 18% - 6% (12% drop on 300 mV)
  • Section 4: 2.44V - 2.1V = 6% - 0% (6% drop on 340 mV)

These numbers are by no means accurate. Temperature and load in the actual application is not accounted for!

Parameters
[in]mvoltsThe voltage in mV
Returns
Battery level in percent.
static __INLINE bool is_word_aligned ( void *  p)
static

Function for checking if a pointer value is aligned to a 4 byte boundary.

Parameters
[in]pPointer value to be checked.
Returns
TRUE if pointer is aligned to a 4 byte boundary, FALSE otherwise.
static __INLINE uint16_t uint16_decode ( const uint8_t *  p_encoded_data)
static

Function for decoding a uint16 value.

Parameters
[in]p_encoded_dataBuffer where the encoded data is stored.
Returns
Decoded value.
static __INLINE uint8_t uint16_encode ( uint16_t  value,
uint8_t *  p_encoded_data 
)
static

Function for encoding a uint16 value.

Parameters
[in]valueValue to be encoded.
[out]p_encoded_dataBuffer where the encoded data is to be written.
Returns
Number of bytes written.
static __INLINE uint32_t uint32_decode ( const uint8_t *  p_encoded_data)
static

Function for decoding a uint32 value.

Parameters
[in]p_encoded_dataBuffer where the encoded data is stored.
Returns
Decoded value.
static __INLINE uint8_t uint32_encode ( uint32_t  value,
uint8_t *  p_encoded_data 
)
static

Function for encoding a uint32 value.

Parameters
[in]valueValue to be encoded.
[out]p_encoded_dataBuffer where the encoded data is to be written.
Returns
Number of bytes written.