nRF51 SDK - S130 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages

Real timer counter (RTC) driver. More...

Data Structures

struct  nrf_drv_rtc_t
 RTC driver instance structure. More...
 
struct  nrf_drv_rtc_config_t
 RTC driver instance configuration structure. More...
 

Macros

#define RTC_US_TO_TICKS(us, freq)   ((us*freq)/1000000)
 Macro to convert microseconds into ticks.
 
#define NRF_DRV_RTC_INSTANCE(id)
 Macro for creating RTC driver instance. More...
 
#define NRF_DRV_RTC_DEFAULT_CONFIG(id)
 RTC instance default configuration. More...
 

Typedefs

typedef void(* nrf_drv_rtc_handler_t )(nrf_drv_rtc_int_type_t int_type)
 RTC driver instance handler type.
 

Enumerations

enum  nrf_drv_rtc_int_type_t {
  NRF_DRV_RTC_INT_COMPARE0 = 0,
  NRF_DRV_RTC_INT_COMPARE1 = 1,
  NRF_DRV_RTC_INT_COMPARE2 = 2,
  NRF_DRV_RTC_INT_COMPARE3 = 3,
  NRF_DRV_RTC_INT_TICK = 4,
  NRF_DRV_RTC_INT_OVERFLOW = 5
}
 RTC driver interrupt types. More...
 

Functions

ret_code_t nrf_drv_rtc_init (nrf_drv_rtc_t const *const p_instance, nrf_drv_rtc_config_t const *p_config, nrf_drv_rtc_handler_t handler)
 Function for initializing the RTC driver instance. More...
 
void nrf_drv_rtc_uninit (nrf_drv_rtc_t const *const p_instance)
 Function for uninitializing the RTC driver instance. More...
 
void nrf_drv_rtc_enable (nrf_drv_rtc_t const *const p_instance)
 Function for enabling the RTC driver instance. More...
 
void nrf_drv_rtc_disable (nrf_drv_rtc_t const *const p_instance)
 Function for disabling the RTC driver instance. More...
 
ret_code_t nrf_drv_rtc_cc_set (nrf_drv_rtc_t const *const p_instance, uint32_t channel, uint32_t val, bool enable_irq)
 Function for setting a compare channel. More...
 
ret_code_t nrf_drv_rtc_cc_disable (nrf_drv_rtc_t const *const p_instance, uint32_t channel)
 Function for disabling a channel. More...
 
void nrf_drv_rtc_tick_enable (nrf_drv_rtc_t const *const p_instance, bool enable_irq)
 Function for enabling tick. More...
 
void nrf_drv_rtc_tick_disable (nrf_drv_rtc_t const *const p_instance)
 Function for disabling tick. More...
 
void nrf_drv_rtc_overflow_enable (nrf_drv_rtc_t const *const p_instance, bool enable_irq)
 Function for enabling overflow. More...
 
void nrf_drv_rtc_overflow_disable (nrf_drv_rtc_t const *const p_instance)
 Function for disabling overflow. More...
 
uint32_t nrf_drv_rtc_max_ticks_get (nrf_drv_rtc_t const *const p_instance)
 Function for getting the maximum relative ticks value that can be set in the compare channel. More...
 
__STATIC_INLINE void nrf_drv_rtc_int_disable (nrf_drv_rtc_t const *const p_instance, uint32_t *p_mask)
 Function for disabling all instance interrupts. More...
 
__STATIC_INLINE void nrf_drv_rtc_int_enable (nrf_drv_rtc_t const *const p_instance, uint32_t mask)
 Function for enabling instance interrupts. More...
 
__STATIC_INLINE uint32_t nrf_drv_rtc_counter_get (nrf_drv_rtc_t const *const p_instance)
 Function for retrieving the current counter value. More...
 
__STATIC_INLINE void nrf_drv_rtc_counter_clear (nrf_drv_rtc_t const *const p_instance)
 Function for clearing the counter value. More...
 
__STATIC_INLINE uint32_t nrf_drv_rtc_task_address_get (nrf_drv_rtc_t const *const p_instance, nrf_rtc_task_t task)
 Function for returning a requested task address for the RTC driver instance. More...
 
__STATIC_INLINE uint32_t nrf_drv_rtc_event_address_get (nrf_drv_rtc_t const *const p_instance, nrf_rtc_event_t event)
 Function for returning a requested event address for the RTC driver instance. More...
 

Detailed Description

Real timer counter (RTC) driver.

Macro Definition Documentation

#define NRF_DRV_RTC_DEFAULT_CONFIG (   id)
Value:
{ \
.prescaler = (uint16_t)(RTC_INPUT_FREQ/RTC##id##_CONFIG_FREQUENCY)-1, \
.interrupt_priority = RTC##id##_CONFIG_IRQ_PRIORITY, \
.reliable = RTC##id##_CONFIG_RELIABLE, \
.tick_latency = RTC_US_TO_TICKS(NRF_MAXIMUM_LATENCY_US,RTC##id##_CONFIG_FREQUENCY), \
}

RTC instance default configuration.

#define NRF_DRV_RTC_INSTANCE (   id)
Value:
{ \
.p_reg = NRF_RTC##id, \
.irq = RTC##id##_IRQn, \
.instance_id = RTC##id##_INSTANCE_INDEX \
}

Macro for creating RTC driver instance.

Enumeration Type Documentation

RTC driver interrupt types.

Enumerator
NRF_DRV_RTC_INT_COMPARE0 

Interrupt from COMPARE0 event.

NRF_DRV_RTC_INT_COMPARE1 

Interrupt from COMPARE1 event.

NRF_DRV_RTC_INT_COMPARE2 

Interrupt from COMPARE2 event.

NRF_DRV_RTC_INT_COMPARE3 

Interrupt from COMPARE3 event.

NRF_DRV_RTC_INT_TICK 

Interrupt from TICK event.

NRF_DRV_RTC_INT_OVERFLOW 

Interrupt from OVERFLOW event.

Function Documentation

ret_code_t nrf_drv_rtc_cc_disable ( nrf_drv_rtc_t const *const  p_instance,
uint32_t  channel 
)

Function for disabling a channel.

This function disables channel events and channel interrupts. The function asserts if the instance is not initialized or if the channel parameter is wrong.

Parameters
[in]p_instancePointer to the instance.
[in]channelOne of the instance's channels.
Return values
NRF_SUCCESSIf the procedure was successful.
NRF_ERROR_TIMEOUTIf an interrupt was pending on the requested channel.
ret_code_t nrf_drv_rtc_cc_set ( nrf_drv_rtc_t const *const  p_instance,
uint32_t  channel,
uint32_t  val,
bool  enable_irq 
)

Function for setting a compare channel.

The function asserts if the instance is not initialized or if the channel parameter is wrong. The function powers on the instance if the instance was in power off state.

The driver is not entering a critical section when configuring RTC, which means that it can be preempted for a certain amount of time. When the driver was preempted and the value to be set is short in time, there is a risk that the driver sets a compare value that is behind. If RTCn_CONFIG_RELIABLE is 1 for the given instance, the Reliable mode handles that case. However, to detect if the requested value is behind, this mode makes the following assumptions:

  • The maximum preemption time in ticks (8-bit value) is known and is less than 7.7 ms (for prescaler = 0, RTC frequency 32 kHz).
  • The requested absolute compare value is not bigger than (0x00FFFFFF)-tick_latency. It is the user's responsibility to ensure that.
Parameters
[in]p_instancePointer to the instance.
[in]channelOne of the instance's channels.
[in]valAbsolute value to be set in the compare register.
[in]enable_irqTrue to enable the interrupt. False to disable the interrupt.
Return values
NRF_SUCCESSIf the procedure was successful.
NRF_ERROR_TIMEOUTIf the compare was not set because the request value is behind the current counter value. This error can only be reported if RTCn_CONFIG_RELIABLE = 1.
__STATIC_INLINE void nrf_drv_rtc_counter_clear ( nrf_drv_rtc_t const *const  p_instance)

Function for clearing the counter value.

This function asserts if the instance is not powered on.

Parameters
[in]p_instancePointer to the instance.
__STATIC_INLINE uint32_t nrf_drv_rtc_counter_get ( nrf_drv_rtc_t const *const  p_instance)

Function for retrieving the current counter value.

This function asserts if the instance is not powered on or if p_val is NULL.

Parameters
[in]p_instancePointer to the instance.
Return values
valueCounter value.
void nrf_drv_rtc_disable ( nrf_drv_rtc_t const *const  p_instance)

Function for disabling the RTC driver instance.

Note
Function asserts if instance is disabled.
Parameters
[in]p_instancePointer to instance.
void nrf_drv_rtc_enable ( nrf_drv_rtc_t const *const  p_instance)

Function for enabling the RTC driver instance.

Note
Function asserts if instance is enabled.
Parameters
[in]p_instancePointer to the instance.
__STATIC_INLINE uint32_t nrf_drv_rtc_event_address_get ( nrf_drv_rtc_t const *const  p_instance,
nrf_rtc_event_t  event 
)

Function for returning a requested event address for the RTC driver instance.

This function asserts if the output pointer is NULL. The event address can be used by the PPI module.

Parameters
[in]p_instancePointer to the instance.
[in]eventOne of the peripheral events.
Return values
Addressof event register.
ret_code_t nrf_drv_rtc_init ( nrf_drv_rtc_t const *const  p_instance,
nrf_drv_rtc_config_t const *  p_config,
nrf_drv_rtc_handler_t  handler 
)

Function for initializing the RTC driver instance.

After initialization, the instance is in power off state.

Parameters
[in]p_instancePointer to the instance.
[in]p_configInitial configuration. Default configuration used if NULL.
[in]handlerUser's event handler.
Return values
NRF_SUCCESSIf successfully initialized.
NRF_ERROR_INVALID_PARAMIf no handler was provided.
NRF_ERROR_INVALID_STATEIf the instance is already initialized.
__STATIC_INLINE void nrf_drv_rtc_int_disable ( nrf_drv_rtc_t const *const  p_instance,
uint32_t *  p_mask 
)

Function for disabling all instance interrupts.

Parameters
[in]p_instancePointer to the instance.
[in]p_maskPointer to the location where the mask is filled.
__STATIC_INLINE void nrf_drv_rtc_int_enable ( nrf_drv_rtc_t const *const  p_instance,
uint32_t  mask 
)

Function for enabling instance interrupts.

Parameters
[in]p_instancePointer to the instance.
[in]maskMask of interrupts to enable.
uint32_t nrf_drv_rtc_max_ticks_get ( nrf_drv_rtc_t const *const  p_instance)

Function for getting the maximum relative ticks value that can be set in the compare channel.

When a SoftDevice is used, it occupies the highest level interrupt, so that the application code can be interrupted at any moment for a certain period of time. If Reliable mode is enabled, the provided maximum latency is taken into account and the return value is smaller than the RTC counter resolution. If Reliable mode is disabled, the return value equals the counter resolution.

Parameters
[in]p_instancePointer to the instance.
Return values
ticksMaximum ticks value.
void nrf_drv_rtc_overflow_disable ( nrf_drv_rtc_t const *const  p_instance)

Function for disabling overflow.

This function disables the overflow event and interrupt.

Parameters
[in]p_instancePointer to the instance.
void nrf_drv_rtc_overflow_enable ( nrf_drv_rtc_t const *const  p_instance,
bool  enable_irq 
)

Function for enabling overflow.

This function enables the overflow event and optionally the interrupt. The function asserts if the instance is not powered on.

Parameters
[in]p_instancePointer to the instance.
[in]enable_irqTrue to enable the interrupt. False to disable the interrupt.
__STATIC_INLINE uint32_t nrf_drv_rtc_task_address_get ( nrf_drv_rtc_t const *const  p_instance,
nrf_rtc_task_t  task 
)

Function for returning a requested task address for the RTC driver instance.

This function asserts if the output pointer is NULL. The task address can be used by the PPI module.

Parameters
[in]p_instancePointer to the instance.
[in]taskOne of the peripheral tasks.
Return values
Addressof task register.
void nrf_drv_rtc_tick_disable ( nrf_drv_rtc_t const *const  p_instance)

Function for disabling tick.

This function disables the tick event and interrupt.

Parameters
[in]p_instancePointer to the instance.
void nrf_drv_rtc_tick_enable ( nrf_drv_rtc_t const *const  p_instance,
bool  enable_irq 
)

Function for enabling tick.

This function enables the tick event and optionally the interrupt. The function asserts if the instance is not powered on.

Parameters
[in]p_instancePointer to the instance.
[in]enable_irqTrue to enable the interrupt. False to disable the interrupt.
void nrf_drv_rtc_uninit ( nrf_drv_rtc_t const *const  p_instance)

Function for uninitializing the RTC driver instance.

After uninitialization, the instance is in idle state. The hardware should return to the state before initialization. The function asserts if the instance is in idle state.

Parameters
[in]p_instancePointer to the instance.