nRF51 SDK - S130 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Data Fields
sd_mbr_command_vector_table_base_set_t Struct Reference
Types

Sets the base address of the interrupt vector table for interrupts forwarded from the MBR. More...

#include <nrf_mbr.h>

Data Fields

uint32_t address
 

Detailed Description

Sets the base address of the interrupt vector table for interrupts forwarded from the MBR.

Once this function has been called, this address is where the MBR will start to forward interrupts to after a reset.

To restore default forwarding this function should be called with

Parameters
addressset to 0. The MBR will then start forwarding to interrupts to the address in NFR_UICR->BOOTADDR or to the SoftDevice if the BOOTADDR is not set.
Return values
NRF_ERROR_INTERNALindicates an internal error that should not happen.
NRF_ERROR_INVALID_ADDRif parameter address is outside of the flash size.

Field Documentation

uint32_t sd_mbr_command_vector_table_base_set_t::address

The base address of the interrupt vector table for forwarded interrupts.