Functions

Functions
uint32_t	sd_ble_gattc_primary_services_discover (uint16_t conn_handle, uint16_t start_handle, ble_uuid_t const *p_srvc_uuid)
	Initiate or continue a GATT Primary Service Discovery procedure. More...
uint32_t	sd_ble_gattc_relationships_discover (uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)
	Initiate or continue a GATT Relationship Discovery procedure. More...
uint32_t	sd_ble_gattc_characteristics_discover (uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)
	Initiate or continue a GATT Characteristic Discovery procedure. More...
uint32_t	sd_ble_gattc_descriptors_discover (uint16_t conn_handle, ble_gattc_handle_range_t const *p_handle_range)
	Initiate or continue a GATT Characteristic Descriptor Discovery procedure. More...
uint32_t	sd_ble_gattc_char_value_by_uuid_read (uint16_t conn_handle, ble_uuid_t const *p_uuid, ble_gattc_handle_range_t const *p_handle_range)
	Initiate or continue a GATT Read using Characteristic UUID procedure. More...
uint32_t	sd_ble_gattc_read (uint16_t conn_handle, uint16_t handle, uint16_t offset)
	Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure. More...
uint32_t	sd_ble_gattc_char_values_read (uint16_t conn_handle, uint16_t const *p_handles, uint16_t handle_count)
	Initiate a GATT Read Multiple Characteristic Values procedure. More...
uint32_t	sd_ble_gattc_write (uint16_t conn_handle, ble_gattc_write_params_t const *p_write_params)
	Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure. More...
uint32_t	sd_ble_gattc_hv_confirm (uint16_t conn_handle, uint16_t handle)
	Send a Handle Value Confirmation to the GATT Server. More...

Detailed Description

Function Documentation

uint32_t sd_ble_gattc_char_value_by_uuid_read	(	uint16_t	conn_handle,
		ble_uuid_t const *	p_uuid,
		ble_gattc_handle_range_t const *	p_handle_range
	)

Initiate or continue a GATT Read using Characteristic UUID procedure.

This function initiates or resumes a Read using Characteristic UUID procedure. If the last Characteristic has not been reached, this must be called again with an updated handle range to continue the discovery.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_uuid	Pointer to a Characteristic value UUID to read.
[in]	p_handle_range	A pointer to the range of handles to perform this procedure on.

Return values

NRF_SUCCESS	Successfully started or resumed the Read using Characteristic UUID procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_char_values_read	(	uint16_t	conn_handle,
		uint16_t const *	p_handles,
		uint16_t	handle_count
	)

Initiate a GATT Read Multiple Characteristic Values procedure.

This function initiates a GATT Read Multiple Characteristic Values procedure.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handles	A pointer to the handle(s) of the attribute(s) to be read.
[in]	handle_count	The number of handles in p_handles.

Return values

NRF_SUCCESS	Successfully started the Read Multiple Characteristic Values procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_characteristics_discover	(	uint16_t	conn_handle,
		ble_gattc_handle_range_t const *	p_handle_range
	)

Initiate or continue a GATT Characteristic Discovery procedure.

This function initiates or resumes a Characteristic discovery procedure. If the last Characteristic has not been reached, this must be called again with an updated handle range to continue the discovery.

Note

If any of the discovered characteristics have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handle_range	A pointer to the range of handles of the Service to perform this procedure on.

Return values

NRF_SUCCESS	Successfully started or resumed the Characteristic Discovery procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_descriptors_discover	(	uint16_t	conn_handle,
		ble_gattc_handle_range_t const *	p_handle_range
	)

Initiate or continue a GATT Characteristic Descriptor Discovery procedure.

This function initiates or resumes a Characteristic Descriptor discovery procedure. If the last Descriptor has not been reached, this must be called again with an updated handle range to continue the discovery.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handle_range	A pointer to the range of handles of the Characteristic to perform this procedure on.

Return values

NRF_SUCCESS	Successfully started or resumed the Descriptor Discovery procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_hv_confirm	(	uint16_t	conn_handle,
		uint16_t	handle
	)

Send a Handle Value Confirmation to the GATT Server.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	handle	The handle of the attribute in the indication.

Return values

NRF_SUCCESS	Successfully queued the Handle Value Confirmation for transmission.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State or no Indication pending to be confirmed.
BLE_ERROR_INVALID_ATTR_HANDLE	Invalid attribute handle.

uint32_t sd_ble_gattc_primary_services_discover	(	uint16_t	conn_handle,
		uint16_t	start_handle,
		ble_uuid_t const *	p_srvc_uuid
	)

Initiate or continue a GATT Primary Service Discovery procedure.

This function initiates or resumes a Primary Service discovery procedure, starting from the supplied handle. If the last service has not been reached, this function must be called again with an updated start handle value to continue the search.

Note

If any of the discovered services have 128-bit UUIDs which are not present in the table provided to ble_vs_uuids_assign, a UUID structure with type BLE_UUID_TYPE_UNKNOWN will be received in the corresponding event.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	start_handle	Handle to start searching from.
[in]	p_srvc_uuid	Pointer to the service UUID to be found. If it is NULL, all primary services will be returned.

Return values

NRF_SUCCESS	Successfully started or resumed the Primary Service Discovery procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_read	(	uint16_t	conn_handle,
		uint16_t	handle,
		uint16_t	offset
	)

Initiate or continue a GATT Read (Long) Characteristic or Descriptor procedure.

This function initiates or resumes a GATT Read (Long) Characteristic or Descriptor procedure. If the Characteristic or Descriptor to be read is longer than ATT_MTU - 1, this function must be called multiple times with appropriate offset to read the complete value.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	handle	The handle of the attribute to be read.
[in]	offset	Offset into the attribute value to be read.

Return values

NRF_SUCCESS	Successfully started or resumed the Read (Long) procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_relationships_discover	(	uint16_t	conn_handle,
		ble_gattc_handle_range_t const *	p_handle_range
	)

Initiate or continue a GATT Relationship Discovery procedure.

This function initiates or resumes the Find Included Services sub-procedure. If the last included service has not been reached, this must be called again with an updated handle range to continue the search.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_handle_range	A pointer to the range of handles of the Service to perform this procedure on.

Return values

NRF_SUCCESS	Successfully started or resumed the Relationship Discovery procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied.
NRF_ERROR_BUSY	Client procedure already in progress.

uint32_t sd_ble_gattc_write	(	uint16_t	conn_handle,
		ble_gattc_write_params_t const *	p_write_params
	)

Perform a Write (Characteristic Value or Descriptor, with or without response, signed or not, long or reliable) procedure.

This function can perform all write procedures described in GATT.

Note

It is important to note that a write without response will consume an application buffer, and will therefore generate a BLE_EVT_TX_COMPLETE event when the packet has been transmitted. A write (with response) on the other hand will use the standard client internal buffer and thus will only generate a BLE_GATTC_EVT_WRITE_RSP event as soon as the write response has been received from the peer. Please see the documentation of sd_ble_tx_buffer_count_get for more details.

Parameters

[in]	conn_handle	The connection handle identifying the connection to perform this procedure on.
[in]	p_write_params	A pointer to a write parameters structure.

Return values

NRF_SUCCESS	Successfully started the Write procedure.
BLE_ERROR_INVALID_CONN_HANDLE	Invalid Connection Handle.
NRF_ERROR_INVALID_STATE	Invalid Connection State.
NRF_ERROR_INVALID_ADDR	Invalid pointer supplied.
NRF_ERROR_INVALID_PARAM	Invalid parameter(s) supplied.
NRF_ERROR_DATA_SIZE	Invalid data size(s) supplied.
NRF_ERROR_BUSY	Procedure already in progress.
BLE_ERROR_NO_TX_BUFFERS	There are no available buffers left.