nRF51 SDK - S110 SoftDevice
|
#define BLE_HCI_AUTHENTICATION_FAILURE 0x05 |
Authentication Failure.
#define BLE_HCI_CONN_FAILED_TO_BE_ESTABLISHED 0x3E |
Connection Failed to be Established.
#define BLE_HCI_CONN_INTERVAL_UNACCEPTABLE 0x3B |
Connection Interval Unacceptable.
#define BLE_HCI_CONN_TERMINATED_DUE_TO_MIC_FAILURE 0x3D |
Connection Terminated due to MIC Failure.
#define BLE_HCI_CONNECTION_TIMEOUT 0x08 |
Connection Timeout.
#define BLE_HCI_CONTROLLER_BUSY 0x3A |
Controller Busy.
#define BLE_HCI_DIFFERENT_TRANSACTION_COLLISION 0x2A |
Different Transaction Collision.
#define BLE_HCI_DIRECTED_ADVERTISER_TIMEOUT 0x3C |
Directed Adverisement Timeout.
#define BLE_HCI_INSTANT_PASSED 0x28 |
Instant Passed.
#define BLE_HCI_LOCAL_HOST_TERMINATED_CONNECTION 0x16 |
Local Host Terminated Connection.
#define BLE_HCI_MEMORY_CAPACITY_EXCEEDED 0x07 |
Memory Capacity Exceeded.
#define BLE_HCI_PAIRING_WITH_UNIT_KEY_UNSUPPORTED 0x29 |
Pairing with Unit Key Unsupported.
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_LOW_RESOURCES 0x14 |
Remote Device Terminated Connection due to low resources.
#define BLE_HCI_REMOTE_DEV_TERMINATION_DUE_TO_POWER_OFF 0x15 |
Remote Device Terminated Connection due to power off.
#define BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION 0x13 |
Remote User Terminated Connection.
#define BLE_HCI_STATUS_CODE_COMMAND_DISALLOWED 0x0C |
Command Disallowed.
#define BLE_HCI_STATUS_CODE_INVALID_BTLE_COMMAND_PARAMETERS 0x12 |
Invalid BLE Command Parameters.
#define BLE_HCI_STATUS_CODE_INVALID_LMP_PARAMETERS 0x1E |
Invalid LMP Parameters.
#define BLE_HCI_STATUS_CODE_LMP_PDU_NOT_ALLOWED 0x24 |
LMP PDU Not Allowed.
#define BLE_HCI_STATUS_CODE_LMP_RESPONSE_TIMEOUT 0x22 |
LMP Response Timeout.
#define BLE_HCI_STATUS_CODE_PIN_OR_KEY_MISSING 0x06 |
Pin or Key missing.
#define BLE_HCI_STATUS_CODE_SUCCESS 0x00 |
Success.
#define BLE_HCI_STATUS_CODE_UNKNOWN_BTLE_COMMAND 0x01 |
Unknown BLE Command.
#define BLE_HCI_STATUS_CODE_UNKNOWN_CONNECTION_IDENTIFIER 0x02 |
Unknown Connection Identifier.
#define BLE_HCI_STATUS_CODE_UNSPECIFIED_ERROR 0x1F |
Unspecified Error.
#define BLE_HCI_UNSUPPORTED_REMOTE_FEATURE 0x1A |
Unsupported Remote Feature.