nRF51 SDK - S110 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Board Support Package

BSP module. More...

Data Structures

struct  bsp_button_event_cfg_t
 

Macros

#define BSP_BUTTON_ACTION_PUSH   (APP_BUTTON_PUSH)
 
#define BSP_BUTTON_ACTION_RELEASE   (APP_BUTTON_RELEASE)
 
#define BSP_BUTTON_ACTION_LONG_PUSH   (2)
 
#define BUTTON_ERASE_BONDING   BSP_BUTTON_0_MASK
 
#define BUTTON_ERASE_ALL   BSP_BUTTON_1_MASK
 
#define BUTTON_ADVERTISE   BSP_BUTTON_0_MASK
 
#define BUTTON_CLEAR_EVT   BSP_BUTTON_1_MASK
 
#define BUTTON_CAPSLOCK   BSP_BUTTON_2_MASK
 
#define BSP_BUTTONS_ALL   0xFFFFFFFF
 
#define BSP_BUTTONS_NONE   0
 
#define BSP_APP_APP_TIMERS_NUMBER   0
 
#define BSP_BUTTONS_APP_TIMERS_NUMBER   0
 
#define BSP_APP_TIMERS_NUMBER   (BSP_LED_APP_TIMERS_NUMBER + BSP_BUTTONS_APP_TIMERS_NUMBER)
 
#define BSP_INIT_NONE   0
 Types of BSP initialization. More...
 
#define BSP_INIT_LED   (1 << 0)
 
#define BSP_INIT_BUTTONS   (1 << 1)
 
#define BSP_INIT_UART   (1 << 2)
 
#define BSP_LONG_PUSH_TIMEOUT_MS   (1000)
 
#define BSP_INDICATIONS_LIST
 

Typedefs

typedef uint8_t bsp_button_action_t
 
typedef void(* bsp_event_callback_t )(bsp_event_t)
 BSP module event callback function type. More...
 

Enumerations

enum  bsp_indication_t {
  BSP_INDICATE_FIRST = 0,
  BSP_INDICATE_IDLE = BSP_INDICATE_FIRST,
  BSP_INDICATE_SCANNING,
  BSP_INDICATE_ADVERTISING,
  BSP_INDICATE_ADVERTISING_WHITELIST,
  BSP_INDICATE_ADVERTISING_SLOW,
  BSP_INDICATE_ADVERTISING_DIRECTED,
  BSP_INDICATE_BONDING,
  BSP_INDICATE_CONNECTED,
  BSP_INDICATE_SENT_OK,
  BSP_INDICATE_SEND_ERROR,
  BSP_INDICATE_RCV_OK,
  BSP_INDICATE_RCV_ERROR,
  BSP_INDICATE_FATAL_ERROR,
  BSP_INDICATE_ALERT_0,
  BSP_INDICATE_ALERT_1,
  BSP_INDICATE_ALERT_2,
  BSP_INDICATE_ALERT_3,
  BSP_INDICATE_ALERT_OFF,
  BSP_INDICATE_USER_STATE_OFF,
  BSP_INDICATE_USER_STATE_0,
  BSP_INDICATE_USER_STATE_1,
  BSP_INDICATE_USER_STATE_2,
  BSP_INDICATE_USER_STATE_3,
  BSP_INDICATE_USER_STATE_ON,
  BSP_INDICATE_LAST = BSP_INDICATE_USER_STATE_ON
}
 BSP indication states. More...
 
enum  bsp_event_t {
  BSP_EVENT_NOTHING = 0,
  BSP_EVENT_DEFAULT,
  BSP_EVENT_CLEAR_BONDING_DATA,
  BSP_EVENT_CLEAR_ALERT,
  BSP_EVENT_DISCONNECT,
  BSP_EVENT_ADVERTISING_START,
  BSP_EVENT_ADVERTISING_STOP,
  BSP_EVENT_WHITELIST_OFF,
  BSP_EVENT_BOND,
  BSP_EVENT_RESET,
  BSP_EVENT_SLEEP,
  BSP_EVENT_WAKEUP,
  BSP_EVENT_DFU,
  BSP_EVENT_KEY_0,
  BSP_EVENT_KEY_1,
  BSP_EVENT_KEY_2,
  BSP_EVENT_KEY_3,
  BSP_EVENT_KEY_4,
  BSP_EVENT_KEY_5,
  BSP_EVENT_KEY_6,
  BSP_EVENT_KEY_7,
  BSP_EVENT_KEY_LAST = BSP_EVENT_KEY_7
}
 BSP events. More...
 

Functions

uint32_t bsp_init (uint32_t type, uint32_t ticks_per_100ms, bsp_event_callback_t callback)
 Function for initializing BSP. More...
 
uint32_t bsp_buttons_state_get (uint32_t *p_buttons_state)
 Function for getting buttons states. More...
 
uint32_t bsp_button_is_pressed (uint32_t button, bool *p_state)
 Function for checking buttons states. More...
 
uint32_t bsp_event_to_button_action_assign (uint32_t button, bsp_button_action_t action, bsp_event_t event)
 Function for assigning a specific event to a button. More...
 
uint32_t bsp_indication_set (bsp_indication_t indicate)
 Function for configuring indicators to required state. More...
 
uint32_t bsp_indication_text_set (bsp_indication_t indicate, const char *p_text)
 Function for configuring indicators to required state. More...
 
uint32_t bsp_buttons_enable (void)
 Function for enabling all buttons. More...
 
uint32_t bsp_buttons_disable (void)
 Function for disabling all buttons. More...
 
uint32_t bsp_wakeup_buttons_set (uint32_t wakeup_buttons)
 Function for configuring wakeup buttons before going into sleep mode. More...
 

Detailed Description

BSP module.

This module provides a layer of abstraction from the board. It allows the user to indicate certain states on LEDs in a simple way. Module functionality can be modified by additional defines:

Macro Definition Documentation

#define BSP_APP_TIMERS_NUMBER   (BSP_LED_APP_TIMERS_NUMBER + BSP_BUTTONS_APP_TIMERS_NUMBER)

Number of Application Timer instances required by the BSP module.

#define BSP_BUTTON_ACTION_LONG_PUSH   (2)

Represents pushing and holding a button for BSP_LONG_PUSH_TIMEOUT_MS milliseconds. See also bsp_button_action_t.

#define BSP_BUTTON_ACTION_PUSH   (APP_BUTTON_PUSH)

Represents pushing a button. See bsp_button_action_t.

#define BSP_BUTTON_ACTION_RELEASE   (APP_BUTTON_RELEASE)

Represents releasing a button. See bsp_button_action_t.

#define BSP_INDICATIONS_LIST
Value:
{ \
"BSP_INDICATE_IDLE\n\r", \
"BSP_INDICATE_SCANNING\n\r", \
"BSP_INDICATE_ADVERTISING\n\r", \
"BSP_INDICATE_ADVERTISING_WHITELIST\n\r", \
"BSP_INDICATE_ADVERTISING_SLOW\n\r", \
"BSP_INDICATE_ADVERTISING_DIRECTED\n\r", \
"BSP_INDICATE_BONDING\n\r", \
"BSP_INDICATE_CONNECTED\n\r", \
"BSP_INDICATE_SENT_OK\n\r", \
"BSP_INDICATE_SEND_ERROR\n\r", \
"BSP_INDICATE_RCV_OK\n\r", \
"BSP_INDICATE_RCV_ERROR\n\r", \
"BSP_INDICATE_FATAL_ERROR\n\r", \
"BSP_INDICATE_ALERT_0\n\r", \
"BSP_INDICATE_ALERT_1\n\r", \
"BSP_INDICATE_ALERT_2\n\r", \
"BSP_INDICATE_ALERT_3\n\r", \
"BSP_INDICATE_ALERT_OFF\n\r", \
"BSP_INDICATE_USER_STATE_OFF\n\r", \
"BSP_INDICATE_USER_STATE_0\n\r", \
"BSP_INDICATE_USER_STATE_1\n\r", \
"BSP_INDICATE_USER_STATE_2\n\r", \
"BSP_INDICATE_USER_STATE_3\n\r", \
"BSP_INDICATE_USER_STATE_ON\n\r" \
}

See BSP indication states for a list of how these states are indicated for the PCA10028 board and the PCA10031 dongle.

#define BSP_INIT_BUTTONS   (1 << 1)

This bit enables buttons during initialization (bsp_init).

#define BSP_INIT_LED   (1 << 0)

This bit enables LEDs during initialization (bsp_init).

#define BSP_INIT_NONE   0

Types of BSP initialization.

This define specifies the type of initialization without support for LEDs and buttons (bsp_init).

#define BSP_INIT_UART   (1 << 2)

This bit enables UART during initialization (bsp_init).

#define BSP_LONG_PUSH_TIMEOUT_MS   (1000)

The time to hold for a long push (in milliseconds).

Typedef Documentation

typedef uint8_t bsp_button_action_t

The different actions that can be performed on a button.

typedef void(* bsp_event_callback_t)(bsp_event_t)

BSP module event callback function type.

Upon an event in the BSP module, this callback function will be called to notify the application about the event.

Parameters
[in]bsp_event_tBSP event type.

Enumeration Type Documentation

BSP events.

Note
Events from BSP_EVENT_KEY_0 to BSP_EVENT_KEY_LAST are by default assigned to buttons.
Enumerator
BSP_EVENT_NOTHING 

Assign this event to an action to prevent the action from generating an event (disable the action).

BSP_EVENT_DEFAULT 

Assign this event to an action to assign the default event to the action.

BSP_EVENT_CLEAR_BONDING_DATA 

Persistent bonding data should be erased.

BSP_EVENT_CLEAR_ALERT 

An alert should be cleared.

BSP_EVENT_DISCONNECT 

A link should be disconnected.

BSP_EVENT_ADVERTISING_START 

The device should start advertising.

BSP_EVENT_ADVERTISING_STOP 

The device should stop advertising.

BSP_EVENT_WHITELIST_OFF 

The device should remove its advertising whitelist.

BSP_EVENT_BOND 

The device should bond to the currently connected peer.

BSP_EVENT_RESET 

The device should reset.

BSP_EVENT_SLEEP 

The device should enter sleep mode.

BSP_EVENT_WAKEUP 

The device should wake up from sleep mode.

BSP_EVENT_DFU 

The device should enter DFU mode.

BSP_EVENT_KEY_0 

Default event of the push action of BSP_BUTTON_0 (only if this button is present).

BSP_EVENT_KEY_1 

Default event of the push action of BSP_BUTTON_1 (only if this button is present).

BSP_EVENT_KEY_2 

Default event of the push action of BSP_BUTTON_2 (only if this button is present).

BSP_EVENT_KEY_3 

Default event of the push action of BSP_BUTTON_3 (only if this button is present).

BSP_EVENT_KEY_4 

Default event of the push action of BSP_BUTTON_4 (only if this button is present).

BSP_EVENT_KEY_5 

Default event of the push action of BSP_BUTTON_5 (only if this button is present).

BSP_EVENT_KEY_6 

Default event of the push action of BSP_BUTTON_6 (only if this button is present).

BSP_EVENT_KEY_7 

Default event of the push action of BSP_BUTTON_7 (only if this button is present).

BSP indication states.

See BSP indication states for a list of how these states are indicated for the PCA10028 board and the PCA10031 dongle.

Enumerator
BSP_INDICATE_IDLE 

See BSP_INDICATE_IDLE.

BSP_INDICATE_SCANNING 

See BSP_INDICATE_SCANNING.

BSP_INDICATE_ADVERTISING 

See BSP_INDICATE_ADVERTISING.

BSP_INDICATE_ADVERTISING_WHITELIST 

See BSP_INDICATE_ADVERTISING_WHITELIST.

BSP_INDICATE_ADVERTISING_SLOW 

See BSP_INDICATE_ADVERTISING_SLOW.

BSP_INDICATE_ADVERTISING_DIRECTED 

See BSP_INDICATE_ADVERTISING_DIRECTED.

BSP_INDICATE_BONDING 

See BSP_INDICATE_BONDING.

BSP_INDICATE_CONNECTED 

See BSP_INDICATE_CONNECTED.

BSP_INDICATE_SENT_OK 

See BSP_INDICATE_SENT_OK.

BSP_INDICATE_SEND_ERROR 

See BSP_INDICATE_SEND_ERROR.

BSP_INDICATE_RCV_OK 

See BSP_INDICATE_RCV_OK.

BSP_INDICATE_RCV_ERROR 

See BSP_INDICATE_RCV_ERROR.

BSP_INDICATE_FATAL_ERROR 

See BSP_INDICATE_FATAL_ERROR.

BSP_INDICATE_ALERT_0 

See BSP_INDICATE_ALERT_0.

BSP_INDICATE_ALERT_1 

See BSP_INDICATE_ALERT_1.

BSP_INDICATE_ALERT_2 

See BSP_INDICATE_ALERT_2.

BSP_INDICATE_ALERT_3 

See BSP_INDICATE_ALERT_3.

BSP_INDICATE_ALERT_OFF 

See BSP_INDICATE_ALERT_OFF.

BSP_INDICATE_USER_STATE_OFF 

See BSP_INDICATE_USER_STATE_OFF.

BSP_INDICATE_USER_STATE_0 

See BSP_INDICATE_USER_STATE_0.

BSP_INDICATE_USER_STATE_1 

See BSP_INDICATE_USER_STATE_1.

BSP_INDICATE_USER_STATE_2 

See BSP_INDICATE_USER_STATE_2.

BSP_INDICATE_USER_STATE_3 

See BSP_INDICATE_USER_STATE_3.

BSP_INDICATE_USER_STATE_ON 

See BSP_INDICATE_USER_STATE_ON.

Function Documentation

uint32_t bsp_button_is_pressed ( uint32_t  button,
bool *  p_state 
)

Function for checking buttons states.

This function checks if the button is pressed. If the button ID iss out of range, the function returns false.

Parameters
[in]buttonButton ID to check.
[in]p_stateThis variable will store the information whether the specified button is pressed (true) or not.
Return values
NRF_SUCCESSIf the button state was successfully read.
uint32_t bsp_buttons_disable ( void  )

Function for disabling all buttons.

After calling this function, no buttons will generate events when pressed, and no buttons will be able to wake the system up from sleep mode.

Return values
NRF_SUCCESSIf the buttons were successfully disabled.
NRF_ERROR_NOT_SUPPORTEDIf the board has no buttons or BSP_SIMPLE is defined.
Returns
A propagated error.
uint32_t bsp_buttons_enable ( void  )

Function for enabling all buttons.

After calling this function, all buttons will generate events when pressed, and all buttons will be able to wake the system up from sleep mode.

Return values
NRF_SUCCESSIf the buttons were successfully enabled.
NRF_ERROR_NOT_SUPPORTEDIf the board has no buttons or BSP_SIMPLE is defined.
Returns
A propagated error.
uint32_t bsp_buttons_state_get ( uint32_t *  p_buttons_state)

Function for getting buttons states.

This function allows to get the state of all buttons.

Parameters
[in]p_buttons_stateThis variable will store buttons state. Button 0 state is represented by bit 0 (1=pressed), Button 1 state by bit 1, and so on.
Return values
NRF_SUCCESSIf buttons state was successfully read.
uint32_t bsp_event_to_button_action_assign ( uint32_t  button,
bsp_button_action_t  action,
bsp_event_t  event 
)

Function for assigning a specific event to a button.

This function allows redefinition of standard events assigned to buttons. To unassign events, provide the event @ ref BSP_EVENT_NOTHING.

Parameters
[in]buttonButton ID to be redefined.
[in]actionButton action to assign event to.
[in]eventEvent to be assigned to button.
Return values
NRF_SUCCESSIf the event was successfully assigned to button.
NRF_ERROR_INVALID_PARAMIf the button ID or button action was invalid.
uint32_t bsp_indication_set ( bsp_indication_t  indicate)

Function for configuring indicators to required state.

This function indicates the required state by means of LEDs (if enabled).

Note
Alerts are indicated independently.
Parameters
[in]indicateState to be indicated.
Return values
NRF_SUCCESSIf the state was successfully indicated.
NRF_ERROR_NO_MEMIf the internal timer operations queue was full.
NRF_ERROR_INVALID_STATEIf the application timer module has not been initialized, or internal timer has not been created.
uint32_t bsp_indication_text_set ( bsp_indication_t  indicate,
const char *  p_text 
)

Function for configuring indicators to required state.

This function indicates the required state by means of LEDs (if enabled) and UART (if enabled).

Note
Alerts are indicated independently.
Parameters
[in]indicateState to be indicated.
[in]p_textText to be output on UART.
Return values
NRF_SUCCESSIf the state was successfully indicated.
NRF_ERROR_NO_MEMIf the internal timer operations queue was full.
NRF_ERROR_INVALID_STATEIf the application timer module has not been initialized, or timer has not been created.
uint32_t bsp_init ( uint32_t  type,
uint32_t  ticks_per_100ms,
bsp_event_callback_t  callback 
)

Function for initializing BSP.

The function initializes the board support package to allow state indication and button reaction. Default events are assigned to buttons.

Note
Before calling this function, you must initiate the following required modules:
Parameters
[in]typeType of peripherals used.
[in]ticks_per_100msNumber of RTC ticks for 100 ms.
[in]callbackFunction to be called when button press/event is detected.
Return values
NRF_SUCCESSIf the BSP module was successfully initialized.
NRF_ERROR_INVALID_STATEIf the application timer module has not been initialized.
NRF_ERROR_NO_MEMIf the maximum number of timers has already been reached.
NRF_ERROR_INVALID_PARAMIf GPIOTE has too many users.
NRF_ERROR_INVALID_STATEIf button or GPIOTE has not been initialized.
uint32_t bsp_wakeup_buttons_set ( uint32_t  wakeup_buttons)

Function for configuring wakeup buttons before going into sleep mode.

After calling this function, only the buttons that are set to 1 in wakeup_buttons can be used to wake up the chip. If this function is not called before going to, sleep either all or no buttons can wake up the chip.

This function should only be called immediately before going into sleep.

Parameters
[in]wakeup_buttonsMask describing which buttons should be able to wake up the chip.
Return values
NRF_SUCCESSIf the buttons were successfully enabled.
NRF_ERROR_NOT_SUPPORTEDIf the board has no buttons or BSP_SIMPLE is defined.