nRF51 SDK - S110 SoftDevice
|
APIs for SoftDevice management. More...
Modules | |
SoftDevice Manager Error Codes | |
Error definitions for the SDM API. | |
Defines | |
Enumerations | |
Types | |
Functions | |
Macros | |
#define | SOFTDEVICE_INFO_STRUCT_OFFSET (0x2000) |
Defines the SoftDevice Information Structure location (address) as an offset from the start of the softdevice (without MBR) | |
#define | MBR_SIZE (0x1000) |
Defines the usual size reserverd for the MBR when a softdevice is written to flash. This is the offset where the first byte of the softdevice hex file is written. | |
#define | SOFTDEVICE_INFO_STRUCT_ADDRESS (SOFTDEVICE_INFO_STRUCT_OFFSET + MBR_SIZE) |
Defines the absolute Softdevice information structure location (address) | |
#define | SD_SIZE_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x08) |
Defines the offset for Softdevice size value relative to Softdevice base address. | |
#define | SD_FWID_OFFSET (SOFTDEVICE_INFO_STRUCT_OFFSET + 0x0C) |
Defines the offset for FWID value relative to Softdevice base address. | |
#define | SD_SIZE_GET(baseaddr) (*((uint32_t *) ((baseaddr) + SD_SIZE_OFFSET))) |
Defines a macro for retreiving the actual Softdevice size value from a given base address use MBR_SIZE when Softdevice is installed just above the MBR (the usual case) | |
#define | SD_FWID_GET(baseaddr) ((*((uint32_t *) ((baseaddr) + SD_FWID_OFFSET))) & 0xFFFF) |
Defines a macro for retreiving the actual FWID value from a given base address use MBR_SIZE when Softdevice is installed just above the MBR (the usual case) | |
APIs for SoftDevice management.