 nRF51 SDK | Application Programming Interface for Common Libraries, BLE Libraries, and BLE Services |
  Database Discovery | Database discovery module |
 Defines | |
| Enumerations | |
| Structures | |
| Types | |
 Functions | |
| Peripheral Drivers | |
| ADNS2080 driver | ADNS2080 mouse sensor driver |
| Cherry 8x16 keyboard matrix driver | Cherry 8x16 keyboard matrix driver |
| DS1624 digital temperature sensor driver | DS1624 digital temperature sensor driver |
| MPU6050 gyro/accelerometer driver | MPU6050 gyro/accelerometer driver |
| Synaptics Touchpad driver. | Synaptics Touchpad driver |
| AES ECB encryption | Driver for the nRF51 AES Electronic Code Book (ECB) peripheral |
| GPIO abstraction | GPIO pin abstraction and port abstraction for reading and writing byte-wise to GPIO ports |
| GPIOTE abstraction | GPIOTE abstraction for configuration of channels |
| Non-volatile memory controller | Driver for the nRF51 NVMC peripheral |
| TEMP (temperature) abstraction | Temperature module init and read functions |
| SDIO driver | 2-wire serial interface driver |
| Simple UART driver | Simple UART driver |
| SPI Master driver | SPI master driver |
| Software controlled SPI Slave driver. | Software controlled SPI Slave driver |
| Software controlled TWI Master driver | Software controlled TWI Master driver |
| ANT+ Profiles | |
| BLE Services | |
| Running Speed and Cadence Service | Running Speed and Cadence Service module |
| Heart Rate Service | Heart Rate Service module |
| Alert Notification Service Client | Alert Notification module |
| Battery Service | Battery Service module |
| Blood Pressure Service | Blood Pressure Service module |
| Cycling Speed and Cadence Service | Cycling Speed and Cadence Service module |
| Cycling Speed and Cadence Service feature bits | |
| Device Firmware Update Service | Device Firmware Update Service |
| Device Information Service | Device Information Service module |
| Vendor ID Source values | |
| Glucose Service | Glucose Service module |
| Glucose Database Service | Glucose Service module |
| Human Interface Device Service | Human Interface Device Service module |
| Health Thermometer Service | Health Thermometer Service module |
| Immediate Alert Service | Immediate Alert Service module |
| Immediate Alert Service Client | Immediate Alert Service Client module |
| Link Loss Service | Link Loss Service module |
| Speed and Cadence Control Point | Speed and Cadence Control Point module |
| Control point functionalities. | |
| Common service definitions | Constants, type definitions and functions that are common to all services |
| Service UUID definitions | |
| Characteristic UUID definitions | |
| Definitions for the Alert Level characteristic values | |
| TX Power Service | TX Power Service module |
| Battery Service Client | Battery Service Client module |
| Enumerations | |
| Structures | |
| Types | |
| Functions | |
| Heart Rate Service Client | Heart Rate Service Client module |
| Enumerations | |
| Structures | |
| Types | |
| Functions | |
| Apple Notification Service Client | Apple Notification module - Disclaimer: This module (Apple Notification Center Service) can and will be changed at any time by either Apple or Nordic Semiconductor ASA |
| BLE Libraries | |
| Device Manager | Device Manager Application Interface Abstraction |
| Service/Protocol Types | Describes the possible types of Service/Protocol Contexts for a bonded/peer device |
| Device Manager Events | This section describes the device manager events that are notified to the application |
| General Events | General or miscellaneous events |
| Link Status Events | Link Status Events |
| Context Management Events | Context Management Events |
| Device Manager Data Types | This section describes all the data types exposed by the module to the application |
| Device Module APIs | This section describes APIs exposed by the module |
| Device Module Set-up APIs | Initialization & registration APIs that are pre-requisite for all other module procedures |
| APIs to set up or read status of security on a link. | This section describes APIs to set up Security. These APIs require that the peer is connected before the procedures can be requested |
| Context Management APIs | Utility APIs offered by the device manager to get information about the peer if and when needed |
| Utility APIs | This section describes the utility APIs offered by the module |
 Device Manager Sequence Charts | |
 Security Set-Up & Status Related | |
| Fresh Bonding & Context Store | |
| GAP Central | |
| GAP Peripheral | |
| Link Encryption with Bonded Device | |
| GAP Central | |
| GAP Peripheral | |
| Device Manager Context Management MSCs | |
| Deleting one or all device context | |
| GAP Peripheral/GAP Central: Delete one bonded device | |
| GAP Peripheral/GAP Central: Delete all bonded devices | |
| Initialization and Setup | |
| Assert Handler for debug purposes. | Module for handling of assert during application development when debugging |
| DTM - Direct Test Mode | Module for testing RF/PHY using DTM commands |
| Error Log Module | Module for writing error and stack to flash memory |
| Record Access Control Point | Record Access Control Point library |
| Radio Notification Event Handler | Module for propagating Radio Notification events to the application |
| Advertising Data Encoder | Function for encoding the advertising data and/or scan response data, and passing them to the stack |
| Connection Parameters Negotiation | Module for initiating and executing a connection parameters negotiation procedure |
| BLE Date Time characteristic type | Definition of ble_date_time_t type |
| Sensor Data Simulator | Functions for simulating sensor data |
| Flash Manager | Module for accessing flash memory |
| SDK Common Libraries | |
| Persistent Storage Interface | Abstracted flash interface |
| Persistent Storage Access Operation Codes | Persistent Storage Access Operation Codes. These are used to report any error during a persistent storage access operation or any general error that may occur in the interface |
| Persistent Memory Interface Data Types | Data Types needed for interfacing with persistent memory |
| Persistent Storage Access Routines | Functions/Interface SDK modules use to persistently store data |
| UART module | UART module interface |
| Button Handler | Buttons handling module |
| FIFO implementation | FIFO implementation |
| GPIOTE Handler | GPIOTE handler module |
| Memory pool | Memory pool implementation |
| Memory Pool Internal | Memory pool internal definitions |
| SLIP module | SLIP layer for supporting packet framing in HCI transport |
| HCI Transport | HCI transport module implementation |
| CRC compute | This module implements the CRC-16 calculation in the blocks |
| Scheduler | The scheduler is used for transferring execution from the interrupt context to the main context |
| Application Timer | Application timer functionality |
| Debug Logger | Enables debug logs/ trace over UART |
| Common application error handler | Common application error handler and macros for utilizing a common error handler |
| Utility Functions and Definitions | Various types and definitions available to all applications |
| Utility Functions and Definitions (Platform) | Various types and definitions available to all applications when using SoftDevice |
| SDK Error codes | |
| Base defined for SDK Modules | |
| Codes reserved as identification for module where the error occurred. | |
| Codes reserved as identification for common errors. | |
| Error / status codes specific to device manager. | |
| Board Support Package | BSP module |
| SoftDevice Event Handler | API for initializing and disabling the SoftDevice |
| Types definitions for ANT support in SoftDevice handler. | This file contains the declarations of types required for ANT stack support. These types will be defined when the preprocessor define ANT_STACK_SUPPORT_REQD is defined |
| Types definitions for BLE support in SoftDevice handler. | This file contains the declarations of types required for BLE stack support. These types will be defined when the preprocessor define BLE_STACK_SUPPORT_REQD is defined |
| Bootloader/DFU API | |
| HCI Transport Layer Configuration | Definition of HCI Transport Layer configurable parameters |
| Bootloader API. | Bootloader module interface |
| Types and definitions. | Bootloader module type and definitions |
| Bootloader settings API. | Bootloader settings module interface |
| DFU BLE packet handling in Application | DFU BLE packet handling for application |
| Device Firmware Update API. | Device Firmware Update module interface |
| Types and definitions. | Device Firmware Update module type and definitions |
| Init packet handling in DFU. | Device Firmware Update module type and function declaration for init packet handling |
| DFU transport API. | DFU transport module interface |
| Bootloader util API. | Bootloader util module interface |
| Device Firmware Update internal header for bank handling in DFU. | Device Firmware Update Bank handling module interface |
| Ble_sdk_app_bootloader_main | |
| DFU BLE SVC | DFU BLE SVC in bootloader. The DFU BLE SuperVisor Calls allow an application to execute functions in the installed bootloader |
| DFU BLE SVC internal | DFU BLE SVC internal functions in bootloader. The DFU BLE SuperVisor Calls allow an application to execute functions in the installed bootloader. This interface provides internal Bootloader DFU functions for retrieving data exchanged through SuperVisor Calls |
| DFU BLE SVC internal | DFU BLE SVC internal functions in bootloader. The DFU BLE SuperVisor Calls allow an application to execute functions in the installed bootloader. This interface provides internal Bootloader DFU functions for retrieving data exchanged through SuperVisor Calls |
 S310 (ANT and BLE peripheral) | Application Programming Interface for S310 SoftDevice |
| ANT STACK | APIs for the ANT Stack |
| ANT Application Interface | ANT Stack Application Programming Interface (API) |
| ANT Error Return | |
| ANT Stack Parameters | |
| BLE SoftDevice Common | Type definitions, macros, error codes, SVC and event number subranges etc. common to all S110 SoftDevice modules |
| Events, type definitions and API calls | Module independent events, type definitions and API calls for the S110 SoftDevice |
| Enumerations | |
| Defines | |
| User Memory Types | |
| BLE Connection Handles | |
| Assigned Values for BLE UUIDs | |
| Types of UUID | |
| Bluetooth Appearance values | |
| Structures | |
| Functions | |
| General error codes | General error code definitions for the BLE API |
| Module specific error code subranges | Assignment of subranges for module specific error codes |
| Bluetooth status codes | |
| Module specific SVC and event number subranges | Definition of SVC and event number subranges for each API module |
| Common types and macro definitions | Common types and macro definitions for the S110 SoftDevice |
| Defines | |
| User Memory Types | |
| BLE Connection Handles | |
| Assigned Values for BLE UUIDs | |
| Types of UUID | |
| Bluetooth Appearance values | |
| Structures | |
| Message Sequence Charts | |
| Interrupt-driven Event Retrieval | |
| Thread Mode Event Retrieval | |
| App Buffer Management | |
| SoftDevice Global Error Codes | Global Error definitions |
| Error Codes Base number definitions | |
| Generic Access Profile (GAP) | Definitions and prototypes for the GAP interface |
| Message Sequence Charts | |
| GAP Advertisement | |
| GAP Connection Establishment and Termination | |
| GAP Connection Parameter Update | |
| GAP RSSI | |
| GAP Pairing: Just Works | |
| GAP Bonding: Just Works | |
| GAP Bonding: Passkey Entry, Peripheral displays | |
| GAP Bonding: Passkey Entry (Central display) or OOB MSC | |
| GAP Security Establishment using stored keys | |
| GAP Peripheral Initiated Security Establishment | |
| Enumerations | |
| Defines | |
| SVC return values specific to GAP | |
| GAP Roles | |
| GAP Timeout sources | |
| GAP Address types | |
| GAP Address cycle modes | |
| GAP Advertising and Scan Response Data format | |
| GAP Advertisement Flags | |
| GAP Advertising interval max and min | |
| GAP Advertising types | |
| GAP Advertising filter policies | |
| GAP Advertising timeout values | |
| GAP Discovery modes | |
| GAP IO Capabilities | |
| GAP Authentication Key Types | |
| GAP Security status | |
| GAP Security status sources | |
| GAP Connection Parameters Limits | |
| GAP attribute security requirement setters | |
| GAP Security Modes | |
| Structures | |
| Functions | |
| Generic Attribute Profile (GATT) Client | Definitions and prototypes for the GATT Client interface |
| Message Sequence Charts | |
| GATTC Primary Service Discovery | |
| GATTC Relationship Discovery | |
| GATTC Characteristic Discovery | |
| GATTC Descriptor Discovery | |
| GATTC Read Characteristic Value by UUID | |
| GATTC Characteristic or Descriptor Value Read | |
| GATTC Read Multiple Characteristic Values | |
| GATTC Characteristic or Descriptor Value Write | |
| GATTC Handle Value Indication | |
| GATTC Handle Value Notification | |
| GATTC Timeout | |
| Enumerations | |
| Defines | |
| SVC return values specific to GATTC | |
| Structures | |
| Functions | |
| Generic Attribute Profile (GATT) Common | Common definitions and prototypes for the GATT interfaces |
| Defines | |
| GATT Timeout sources | |
| GATT Write operations | |
| GATT Execute Write flags | |
| GATT Handle Value operations | |
| GATT Status Codes | |
| Characteristic Presentation Formats | |
| GATT Bluetooth Namespaces | |
| Structures | |
| Generic Attribute Profile (GATT) Server | Definitions and prototypes for the GATTS interface |
| Message Sequence Charts | |
| GATTS ATT Table Population | |
| Read Request without Authorization | |
| GATTS Write Request without Authorization | |
| GATTS Write Command with or without Authorization | |
| GATTS Read Request with Authorization | |
| GATTS Write Request with Authorization | |
| GATTS Queued Writes: Stack handled, no attributes require authorization | |
| GATTS Queued Writes: Stack handled, one or more attributes require authorization | |
| GATTS Queued Writes: App handled, no attributes require authorization | |
| GATTS Queued Writes: App handled, one or more attributes require authorization | |
| GATTS Queued Writes: Prepare Queue Full | |
| GATTS Handle Value Indication | |
| GATTS Handle Value Notification | |
| GATTS Handle Value Indication or Notification disabled | |
| GATTS Handle Value Indication or Notification with System Attributes Missing | |
| GATTS Service Changed | |
| GATTS System Attributes Handling: Unknown Peer | |
| GATTS System Attributes Handling: Bonded Peer | |
| Enumerations | |
| Defines | |
| SVC return values specific to GATTS | |
| Maximum attribute lengths | |
| GATT Server Service Types | |
| GATT Server Attribute Types | |
| GATT Server Operations | |
| GATT Value Locations | |
| GATT Server Authorization Types | |
| Structures | |
| Functions | |
| User memory layout for Queued Writes | |
| Logical Link Control and Adaptation Protocol (L2CAP) | Definitions and prototypes for the L2CAP interface |
| Message Sequence Charts | |
| L2CAP API | |
| Enumerations | |
| Defines | |
| SVC return values specific to L2CAP | |
| Structures | |
| SoftDevice Manager API | APIs for SoftDevice management |
| SoftDevice Manager Error Codes | Error definitions for the SDM API |
| Defines | |
| Enumerations | |
| Types | |
| Functions | |
| SoftDevice Global Error Codes | Global Error definitions |
| Error Codes Base number definitions | |
| SoC Library API | APIs for the SoC library |
| SoC Library Error Codes | Error definitions for the SoC library |
| Defines | |
| Types | |
| Functions | |
| Master Boot Record API | APIs for updating SoftDevice and BootLoader |
| Defines | |
| Enumerations | |
| Types | |
| Functions | |
1.8.3.1 
