Synaptics Touchpad driver.

Synaptics Touchpad driver. More...

Macros
#define	TOUCHPAD_INT_STATUS   0x14
	Interrupt status register. More...
#define	TOUCHPAD_BUTTON_STATUS   0x41
	Button status register.
#define	TOUCHPAD_FINGER0_REL   0x30
	First register in finger delta block.
#define	TOUCHPAD_GESTURE_FLAGS   0x3A
	Gesture flags 0.
#define	TOUCHPAD_SCROLL   0x3F
	Scroll zone X / horizontal multifinger scroll.
#define	TOUCHPAD_CONTROL   0x42
	Device control register.
#define	TOUCHPAD_COMMAND   0x8F
	Device command register.
#define	TOUCHPAD_RESET   0x54
	Address of reset.
#define	TOUCHPAD_PAGESELECT   0xFF
	Address of page select (can be found in every page at the same address)
#define	TOUCHPAD_PRODUCT_ID   0xA2
	Address of product ID string.

Enumerations
enum	TouchpadSleepMode_t {   SleepmodeNormal = 0x00,   SleepmodeSensorSleep = 0x01 }

Functions
bool	touchpad_init (uint8_t device_address)
	Function for Touchpad initialization. More...
bool	touchpad_reset (void)
	Function for attempting to soft-reset the device. More...
bool	touchpad_interrupt_status_read (uint8_t *interrupt_status)
	Function for reading the interrupt status register of the device. This clears all interrupts. More...
bool	touchpad_set_sleep_mode (TouchpadSleepMode_t mode)
	Function for sleep mode configuration. More...
bool	touchpad_read_register (uint8_t register_address, uint8_t *value)
	Function for reading a touchpad register contents over TWI. More...
bool	touchpad_write_register (uint8_t register_address, uint8_t value)
	Function for writing a touchpad register contents over TWI. More...
bool	touchpad_product_id_read (uint8_t *product_id, uint8_t product_id_bytes)
	Function for writing touchpad register contents over TWI. Writes one or more consecutive registers. More...
bool	touchpad_product_id_verify (void)
	Function for reading and verifying touchpad's product ID. More...

Detailed Description

Synaptics Touchpad driver.

Macro Definition Documentation

#define TOUCHPAD_INT_STATUS   0x14

Interrupt status register.

Touchpad register addresses.

Enumeration Type Documentation

enum TouchpadSleepMode_t

Operational states

Enumerator
SleepmodeNormal	Normal operation.
SleepmodeSensorSleep	Low power operation.

Function Documentation

bool touchpad_init

(

uint8_t

device_address

)

Function for Touchpad initialization.

Parameters

device_address

TWI address of the device in bits [6:0]

Return values

true	Touchpad was successfully identified and initialized
false	Unexpected product ID or communication failure

bool touchpad_interrupt_status_read

(

uint8_t *

interrupt_status

)

Function for reading the interrupt status register of the device. This clears all interrupts.

Parameters

interrupt_status

Address to store interrupt status to.

Return values

true	Register contents read successfully to interrupt_status
false	Reading failed

bool touchpad_product_id_read	(	uint8_t *	product_id,
		uint8_t	product_id_bytes
	)

Function for writing touchpad register contents over TWI. Writes one or more consecutive registers.

Parameters

[out]	product_id	Pointer to a address to store product ID. Memory must be allocated for product_id_bytes number of bytes.
[in]	product_id_bytes	Number of bytes to read

Return values

true	Product ID read succeeded
false	Product ID read failed

bool touchpad_product_id_verify

(

void

)

Function for reading and verifying touchpad's product ID.

Return values

true	Product ID is what was expected
false	Product ID was not what was expected

bool touchpad_read_register	(	uint8_t	register_address,
		uint8_t *	value
	)

Function for reading a touchpad register contents over TWI.

Parameters

[in]	register_address	Register address
[out]	value	Pointer to a data buffer where read data will be stored

Return values

true	Register read succeeded
false	Register read failed

bool touchpad_reset

(

void

)

Function for attempting to soft-reset the device.

Return values

true	Reset succeeded
false	Reset failed

bool touchpad_set_sleep_mode

(

TouchpadSleepMode_t

mode

)

Function for sleep mode configuration.

Note

In low power mode the touchpad do not generate interrupts from touch sensing.

Parameters

[in]

mode

Operational mode

Return values

true	Sleep mode set successfully
false	Sleep mode setting failed

bool touchpad_write_register	(	uint8_t	register_address,
		uint8_t	value
	)

Function for writing a touchpad register contents over TWI.

Parameters

[in]	register_address	Register address
[in]	value	Value to write to register

Return values

true	Register write succeeded
false	Register write failed