nRF51 SDK - S120 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages

Functions

uint32_t sd_ble_gatts_service_add (uint8_t type, ble_uuid_t const *p_uuid, uint16_t *p_handle)
 Add a service declaration to the local server ATT table. More...
 
uint32_t sd_ble_gatts_include_add (uint16_t service_handle, uint16_t inc_srvc_handle, uint16_t *p_include_handle)
 Add an include declaration to the local server ATT table. More...
 
uint32_t sd_ble_gatts_characteristic_add (uint16_t service_handle, ble_gatts_char_md_t const *p_char_md, ble_gatts_attr_t const *p_attr_char_value, ble_gatts_char_handles_t *p_handles)
 Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table. More...
 
uint32_t sd_ble_gatts_descriptor_add (uint16_t char_handle, ble_gatts_attr_t const *p_attr, uint16_t *p_handle)
 Add a descriptor to the local server ATT table. More...
 
uint32_t sd_ble_gatts_value_set (uint16_t handle, uint16_t offset, uint16_t *p_len, uint8_t const *p_value)
 Set the value of a given attribute. More...
 
uint32_t sd_ble_gatts_value_get (uint16_t handle, uint16_t offset, uint16_t *p_len, uint8_t *p_data)
 Get the value of a given attribute. More...
 
uint32_t sd_ble_gatts_hvx (uint16_t conn_handle, ble_gatts_hvx_params_t const *p_hvx_params)
 Notify or Indicate an attribute value. More...
 
uint32_t sd_ble_gatts_service_changed (uint16_t conn_handle, uint16_t start_handle, uint16_t end_handle)
 Indicate the Service Changed attribute value. More...
 
uint32_t sd_ble_gatts_rw_authorize_reply (uint16_t conn_handle, ble_gatts_rw_authorize_reply_params_t const *p_rw_authorize_reply_params)
 Respond to a Read/Write authorization request. More...
 
uint32_t sd_ble_gatts_sys_attr_set (uint16_t conn_handle, uint8_t const *p_sys_attr_data, uint16_t len)
 Update persistent system attribute information. More...
 
uint32_t sd_ble_gatts_sys_attr_get (uint16_t conn_handle, uint8_t *p_sys_attr_data, uint16_t *p_len)
 Retrieve persistent system attribute information from the stack. More...
 

Detailed Description

Function Documentation

uint32_t sd_ble_gatts_characteristic_add ( uint16_t  service_handle,
ble_gatts_char_md_t const *  p_char_md,
ble_gatts_attr_t const *  p_attr_char_value,
ble_gatts_char_handles_t p_handles 
)

Add a characteristic declaration, a characteristic value declaration and optional characteristic descriptor declarations to the local server ATT table.

Note
It is currently only possible to add a characteristic to the last added service (i.e. only sequential addition is supported at this time).
Several restrictions apply to the parameters, such as matching permissions between the user description descriptor and the writeable auxiliaries bits, readable (no security) and writeable (selectable) CCCDs and SCCDs and valid presentation format values.
If no metadata is provided for the optional descriptors, their permissions will be derived from the characteristic permissions.
Parameters
[in]service_handleHandle of the service where the characteristic is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
[in]p_char_mdCharacteristic metadata.
[in]p_attr_char_valuePointer to the attribute structure corresponding to the characteristic value.
[out]p_handlesPointer to the structure where the assigned handles will be stored.
Return values
NRF_SUCCESSSuccessfully added a characteristic.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied, service handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
NRF_ERROR_INVALID_STATEInvalid state to perform operation, a service context is required.
NRF_ERROR_FORBIDDENForbidden value supplied, certain UUIDs are reserved for the stack.
NRF_ERROR_NO_MEMNot enough memory to complete operation.
NRF_ERROR_DATA_SIZEInvalid data size(s) supplied, attribute lengths are restricted by BLE_GATTS_ATTR_LENS_MAX.
uint32_t sd_ble_gatts_descriptor_add ( uint16_t  char_handle,
ble_gatts_attr_t const *  p_attr,
uint16_t *  p_handle 
)

Add a descriptor to the local server ATT table.

Note
It is currently only possible to add a descriptor to the last added characteristic (i.e. only sequential addition is supported at this time).
Parameters
[in]char_handleHandle of the characteristic where the descriptor is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
[in]p_attrPointer to the attribute structure.
[out]p_handlePointer to a 16-bit word where the assigned handle will be stored.
Return values
NRF_SUCCESSSuccessfully added a descriptor.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied, characteristic handle, Vendor Specific UUIDs, lengths, and permissions need to adhere to the constraints.
NRF_ERROR_INVALID_STATEInvalid state to perform operation, a characteristic context is required.
NRF_ERROR_FORBIDDENForbidden value supplied, certain UUIDs are reserved for the stack.
NRF_ERROR_NO_MEMNot enough memory to complete operation.
NRF_ERROR_DATA_SIZEInvalid data size(s) supplied, attribute lengths are restricted by BLE_GATTS_ATTR_LENS_MAX.
uint32_t sd_ble_gatts_hvx ( uint16_t  conn_handle,
ble_gatts_hvx_params_t const *  p_hvx_params 
)

Notify or Indicate an attribute value.

This function checks for the relevant Client Characteristic Configuration descriptor value to verify that the relevant operation (notification or indication) has been enabled by the client. It is also able to update the attribute value before issuing the PDU, so that the application can atomically perform a value update and a server initiated transaction with a single API call. If the application chooses to indicate an attribute value, a BLE_GATTS_EVT_HVC will be sent up as soon as the confirmation arrives from the peer.

Note
The local attribute value may be updated even if an outgoing packet is not sent to the peer due to an error during execution. When receiveing the error codes NRF_ERROR_INVALID_STATE, NRF_ERROR_BUSY, BLE_ERROR_GATTS_SYS_ATTR_MISSING and BLE_ERROR_NO_TX_BUFFERS the ATT table has been updated. The caller can check whether the value has been updated by looking at the contents of *(p_hvx_params->p_len).
It is important to note that a notification will consume an application buffer, and will therefore generate a BLE_EVT_TX_COMPLETE event when the packet has been transmitted. An indication on the other hand will use the standard server internal buffer and thus will only generate a BLE_GATTS_EVT_HVC event as soon as the confirmation has been received from the peer. Please see the documentation of sd_ble_tx_buffer_count_get for more details.
Parameters
[in]conn_handleConnection handle.
[in]p_hvx_paramsPointer to an HVx parameters structure. If the p_data member contains a non-NULL pointer the attribute value will be updated with the contents pointed by it before sending the notification or indication.
Return values
NRF_SUCCESSSuccessfully queued a notification or indication for transmission, and optionally updated the attribute value.
BLE_ERROR_INVALID_CONN_HANDLEInvalid Connection Handle.
NRF_ERROR_INVALID_STATEInvalid Connection State or notifications and/or indications not enabled in the CCCD.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied.
BLE_ERROR_INVALID_ATTR_HANDLEInvalid attribute handle(s) supplied. Only attributes added directly by the application are available to notify and indicate.
BLE_ERROR_GATTS_INVALID_ATTR_TYPEInvalid attribute type(s) supplied, only characteristic values may be notified and indicated.
NRF_ERROR_NOT_FOUNDAttribute not found.
NRF_ERROR_DATA_SIZEInvalid data size(s) supplied.
NRF_ERROR_BUSYProcedure already in progress.
BLE_ERROR_GATTS_SYS_ATTR_MISSINGSystem attributes missing, use sd_ble_gatts_sys_attr_set to set them to a known value.
BLE_ERROR_NO_TX_BUFFERSThere are no available buffers to send the data, applies only to notifications.
uint32_t sd_ble_gatts_include_add ( uint16_t  service_handle,
uint16_t  inc_srvc_handle,
uint16_t *  p_include_handle 
)

Add an include declaration to the local server ATT table.

Note
It is currently only possible to add an include declaration to the last added service (i.e. only sequential addition is supported at this time).
The included service must already be present in the ATT table prior to this call.
Parameters
[in]service_handleHandle of the service where the included service is to be placed, if BLE_GATT_HANDLE_INVALID is used, it will be placed sequentially.
[in]inc_srvc_handleHandle of the included service.
[out]p_include_handlePointer to a 16-bit word where the assigned handle will be stored.
Return values
NRF_SUCCESSSuccessfully added an include declaration.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied, handle values need to match previously added services.
NRF_ERROR_INVALID_STATEInvalid state to perform operation.
NRF_ERROR_FORBIDDENForbidden value supplied, self inclusions are not allowed.
NRF_ERROR_NO_MEMNot enough memory to complete operation.
NRF_ERROR_NOT_FOUNDAttribute not found.
uint32_t sd_ble_gatts_rw_authorize_reply ( uint16_t  conn_handle,
ble_gatts_rw_authorize_reply_params_t const *  p_rw_authorize_reply_params 
)

Respond to a Read/Write authorization request.

Note
This call should only be used as a response to a BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST event issued to the application.
Parameters
[in]conn_handleConnection handle.
[in]p_rw_authorize_reply_paramsPointer to a structure with the attribute provided by the application.
Return values
NRF_SUCCESSSuccessfully queued a response to the peer, and in the case of a write operation, ATT table updated.
BLE_ERROR_INVALID_CONN_HANDLEInvalid Connection Handle.
NRF_ERROR_INVALID_STATEInvalid Connection State or no authorization request pending.
NRF_ERROR_INVALID_PARAMAuthorization op invalid, or for Read Authorization reply: requested handles not replied with, or for Write Authorization reply: handle supplied does not match requested handle.
NRF_ERROR_BUSYThe stack is busy. Retry at later time.
uint32_t sd_ble_gatts_service_add ( uint8_t  type,
ble_uuid_t const *  p_uuid,
uint16_t *  p_handle 
)

Add a service declaration to the local server ATT table.

Parameters
[in]typeToggles between primary and secondary services, see BLE_GATTS_SRVC_TYPES.
[in]p_uuidPointer to service UUID.
[out]p_handlePointer to a 16-bit word where the assigned handle will be stored.
Note
Secondary Services are only relevant in the context of the entity that references them, it is therefore forbidden to add a secondary service declaration that is not referenced by another service later in the ATT table.
Return values
NRF_SUCCESSSuccessfully added a service declaration.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied, Vendor Specific UUIDs need to be present in the table.
NRF_ERROR_FORBIDDENForbidden value supplied, certain UUIDs are reserved for the stack.
NRF_ERROR_NO_MEMNot enough memory to complete operation.
uint32_t sd_ble_gatts_service_changed ( uint16_t  conn_handle,
uint16_t  start_handle,
uint16_t  end_handle 
)

Indicate the Service Changed attribute value.

This call will send a Handle Value Indication to one or more peers connected to inform them that the attribute table layout has changed. As soon as the peer has confirmed the indication, a BLE_GATTS_EVT_SC_CONFIRM event will be issued.

Note
Some of the restrictions and limitations that apply to sd_ble_gatts_hvx also apply here.
Parameters
[in]conn_handleConnection handle.
[in]start_handleStart of affected attribute handle range.
[in]end_handleEnd of affected attribute handle range.
Return values
NRF_SUCCESSSuccessfully queued the Service Changed indication for transmission.
BLE_ERROR_INVALID_CONN_HANDLEInvalid Connection Handle.
NRF_ERROR_INVALID_STATEInvalid Connection State or notifications and/or indications not enabled in the CCCD.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied.
BLE_ERROR_INVALID_ATTR_HANDLEInvalid attribute handle(s) supplied, handles must be in the range populated by the application.
NRF_ERROR_INVALID_STATEInvalid state to perform operation, notifications or indications must be enabled in the CCCD.
NRF_ERROR_BUSYProcedure already in progress.
BLE_ERROR_GATTS_SYS_ATTR_MISSINGSystem attributes missing, use sd_ble_gatts_sys_attr_set to set them to a known value.
uint32_t sd_ble_gatts_sys_attr_get ( uint16_t  conn_handle,
uint8_t *  p_sys_attr_data,
uint16_t *  p_len 
)

Retrieve persistent system attribute information from the stack.

This call is used to retrieve information about values to be stored perisistently by the application after a connection has been terminated. When a new connection is made to the same bond, the values should be restored using sd_ble_gatts_sys_attr_set. The data should be read before any new advertising is started, or any new connection established. The connection handle for the previous now defunct connection will remain valid until a new one is created to allow this API call to refer to it.

Parameters
[in]conn_handleConnection handle of the recently terminated connection.
[out]p_sys_attr_dataPointer to a buffer where updated information about system attributes will be filled in. NULL can be provided to obtain the length of the data
[in,out]p_lenSize of application buffer if p_sys_attr_data is not NULL. Unconditially updated to actual length of system attribute data.
Return values
NRF_SUCCESSSuccessfully retrieved the system attribute information.
BLE_ERROR_INVALID_CONN_HANDLEInvalid Connection Handle.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_DATA_SIZEThe system attribute information did not fit into the provided buffer.
uint32_t sd_ble_gatts_sys_attr_set ( uint16_t  conn_handle,
uint8_t const *  p_sys_attr_data,
uint16_t  len 
)

Update persistent system attribute information.

Supply to the stack information about persistent system attributes. This call is legal in the connected state only, and is usually made immediately after a connection is established and the bond identified. usually as a response to a BLE_GATTS_EVT_SYS_ATTR_MISSING.

p_sysattrs may point directly to the application's stored copy of the struct. If the pointer is NULL, the system attribute info is initialized, assuming that the application does not have any previously saved data for this bond.

Note
The state of persistent system attributes is reset upon connection and then remembered for its duration.
If this call returns with an error code different from NRF_SUCCESS, the storage of persistent system attributes may have been completed only partially. This means that the state of the attribute table is undefined, and the application should either provide a new set of attributes using this same call or reset the SoftDevice to return to a known state.
Parameters
[in]conn_handleConnection handle.
[in]p_sys_attr_dataPointer to a saved copy of system attributes supplied to the stack, or NULL.
[in]lenSize of data pointed by p_sys_attr_data, in octets.
Return values
NRF_SUCCESSSuccessfully set the system attribute information.
BLE_ERROR_INVALID_CONN_HANDLEInvalid Connection Handle.
NRF_ERROR_INVALID_STATEInvalid Connection State.
NRF_ERROR_INVALID_DATAInvalid data supplied, the data should be exactly the same as retrieved with sd_ble_gatts_sys_attr_get.
NRF_ERROR_NO_MEMNot enough memory to complete operation.
NRF_ERROR_BUSYThe stack is busy. Retry at later time.
uint32_t sd_ble_gatts_value_get ( uint16_t  handle,
uint16_t  offset,
uint16_t *  p_len,
uint8_t *  p_data 
)

Get the value of a given attribute.

Parameters
[in]handleAttribute handle.
[in]offsetOffset in bytes to read from.
[in,out]p_lenLength in bytes to be read, total length of attribute value (in bytes, starting from offset) after successful return.
[out]p_dataPointer to a buffer (at least len bytes long) where to store the attribute value. Set to NULL to obtain the complete length of the attribute value.
Note
If the attribute value is longer than the size of the supplied buffer, p_len will return the total attribute value length (excluding offset), and not the number of bytes actually returned in p_data. The application may use this information to allocate a suitable buffer size.
Return values
NRF_SUCCESSSuccessfully retrieved the value of the attribute.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_NOT_FOUNDAttribute not found.
uint32_t sd_ble_gatts_value_set ( uint16_t  handle,
uint16_t  offset,
uint16_t *  p_len,
uint8_t const *  p_value 
)

Set the value of a given attribute.

Parameters
[in]handleAttribute handle.
[in]offsetOffset in bytes to write from.
[in,out]p_lenLength in bytes to be written, length in bytes written after successful return.
[in]p_valuePointer to a buffer (at least len bytes long) containing the desired attribute value.
Return values
NRF_SUCCESSSuccessfully set the value of the attribute.
NRF_ERROR_INVALID_ADDRInvalid pointer supplied.
NRF_ERROR_INVALID_PARAMInvalid parameter(s) supplied.
NRF_ERROR_NOT_FOUNDAttribute not found.
NRF_ERROR_FORBIDDENForbidden handle supplied, certain attributes are not modifiable by the application.
NRF_ERROR_DATA_SIZEInvalid data size(s) supplied, attribute lengths are restricted by BLE_GATTS_ATTR_LENS_MAX.