nRF51 SDK - S110 SoftDevice
 All Data Structures Functions Variables Typedefs Enumerations Enumerator Groups Pages
Blood Pressure Service

Blood Pressure Service module. More...

Data Structures

struct  ble_bps_evt_t
 Blood Pressure Service event. More...
 
struct  ieee_float16_t
 SFLOAT format (IEEE-11073 16-bit FLOAT, defined as a 16-bit vlue with 12-bit mantissa and 4-bit exponent. More...
 
struct  ble_bps_init_t
 Blood Pressure Service init structure. This contains all options and data needed for initialization of the service. More...
 
struct  ble_bps_s
 Blood Pressure Service structure. This contains various status information for the service. More...
 
struct  ble_bps_meas_s
 Blood Pressure Service measurement structure. This contains a Blood Pressure measurement. More...
 

Macros

#define BLE_BPS_FEATURE_BODY_MOVEMENT_BIT   (0x01 << 0)
 
#define BLE_BPS_FEATURE_CUFF_FIT_BIT   (0x01 << 1)
 
#define BLE_BPS_FEATURE_IRREGULAR_PULSE_BIT   (0x01 << 2)
 
#define BLE_BPS_FEATURE_PULSE_RATE_RANGE_BIT   (0x01 << 3)
 
#define BLE_BPS_FEATURE_MEASUREMENT_POSITION_BIT   (0x01 << 4)
 
#define BLE_BPS_FEATURE_MULTIPLE_BOND_BIT   (0x01 << 5)
 

Typedefs

typedef struct ble_bps_s ble_bps_t
 Blood Pressure Service structure. This contains various status information for the service.
 
typedef void(* ble_bps_evt_handler_t )(ble_bps_t *p_bps, ble_bps_evt_t *p_evt)
 Blood Pressure Service event handler type.
 
typedef struct ble_bps_meas_s ble_bps_meas_t
 Blood Pressure Service measurement structure. This contains a Blood Pressure measurement.
 

Enumerations

enum  ble_bps_evt_type_t {
  BLE_BPS_EVT_INDICATION_ENABLED,
  BLE_BPS_EVT_INDICATION_DISABLED,
  BLE_BPS_EVT_INDICATION_CONFIRMED
}
 Blood Pressure Service event type. More...
 

Functions

uint32_t ble_bps_init (ble_bps_t *p_bps, const ble_bps_init_t *p_bps_init)
 Function for initializing the Blood Pressure Service. More...
 
void ble_bps_on_ble_evt (ble_bps_t *p_bps, ble_evt_t *p_ble_evt)
 Function for handling the Application's BLE Stack events. More...
 
uint32_t ble_bps_measurement_send (ble_bps_t *p_bps, ble_bps_meas_t *p_bps_meas)
 Function for sending blood pressure measurement if indication has been enabled. More...
 
uint32_t ble_bps_is_indication_enabled (ble_bps_t *p_bps, bool *p_indication_enabled)
 Function for checking if indication of Blood Pressure Measurement is currently enabled. More...
 

Detailed Description

Blood Pressure Service module.

This module implements the Blood Pressure Service.

     If an event handler is supplied by the application, the Blood Pressure 
     Service will generate Blood Pressure Service events to the application.
Note
The application must propagate BLE stack events to the Blood Pressure Service module by calling ble_bps_on_ble_evt() from the from the ble_stack_handler function.
Attention! To maintain compliance with Nordic Semiconductor ASA Bluetooth profile qualification listings, this section of source code must not be modified.

Macro Definition Documentation

#define BLE_BPS_FEATURE_BODY_MOVEMENT_BIT   (0x01 << 0)

Body Movement Detection Support bit.

#define BLE_BPS_FEATURE_CUFF_FIT_BIT   (0x01 << 1)

Cuff Fit Detection Support bit.

#define BLE_BPS_FEATURE_IRREGULAR_PULSE_BIT   (0x01 << 2)

Irregular Pulse Detection Support bit.

#define BLE_BPS_FEATURE_MEASUREMENT_POSITION_BIT   (0x01 << 4)

Measurement Position Detection Support bit.

#define BLE_BPS_FEATURE_MULTIPLE_BOND_BIT   (0x01 << 5)

Multiple Bond Support bit.

#define BLE_BPS_FEATURE_PULSE_RATE_RANGE_BIT   (0x01 << 3)

Pulse Rate Range Detection Support bit.

Enumeration Type Documentation

Blood Pressure Service event type.

Enumerator
BLE_BPS_EVT_INDICATION_ENABLED 

Blood Pressure value indication enabled event.

BLE_BPS_EVT_INDICATION_DISABLED 

Blood Pressure value indication disabled event.

BLE_BPS_EVT_INDICATION_CONFIRMED 

Confirmation of a blood pressure measurement indication has been received.

Function Documentation

uint32_t ble_bps_init ( ble_bps_t p_bps,
const ble_bps_init_t p_bps_init 
)

Function for initializing the Blood Pressure Service.

Parameters
[out]p_bpsBlood Pressure Service structure. This structure will have to be supplied by the application. It will be initialized by this function, and will later be used to identify this particular service instance.
[in]p_bps_initInformation needed to initialize the service.
Returns
NRF_SUCCESS on successful initialization of service, otherwise an error code.
uint32_t ble_bps_is_indication_enabled ( ble_bps_t p_bps,
bool *  p_indication_enabled 
)

Function for checking if indication of Blood Pressure Measurement is currently enabled.

Parameters
[in]p_bpsBlood Pressure Service structure.
[out]p_indication_enabledTRUE if indication is enabled, FALSE otherwise.
Returns
NRF_SUCCESS on success, otherwise an error code.
uint32_t ble_bps_measurement_send ( ble_bps_t p_bps,
ble_bps_meas_t p_bps_meas 
)

Function for sending blood pressure measurement if indication has been enabled.

The application calls this function after having performed a Blood Pressure measurement. If indication has been enabled, the measurement data is encoded and sent to the client.

Parameters
[in]p_bpsBlood Pressure Service structure.
[in]p_bps_measPointer to new blood pressure measurement.
Returns
NRF_SUCCESS on success, otherwise an error code.
void ble_bps_on_ble_evt ( ble_bps_t p_bps,
ble_evt_t p_ble_evt 
)

Function for handling the Application's BLE Stack events.

Handles all events from the BLE stack of interest to the Blood Pressure Service.

Parameters
[in]p_bpsBlood Pressure Service structure.
[in]p_ble_evtEvent received from the BLE stack.