BQ274XX Sensor Sample

Overview

This sample application retrieves all the fuel gauge parameters, - Voltage, in volts - Average current, in amps - Standby current, in amps - Maximum load current, in amps - Gauge temperature - State of charge measurement in percentage - Full Charge Capacity in mAh - Remaining Charge Capacity in mAh - Nominal Available Capacity in mAh - Full Available Capacity in mAh - Average power in mW - State of health measurement in percentage

from BQ274XX sensor and prints this information to the UART console.

Requirements

Building and Running

Build this sample using the following commands:

# From the root of the zephyr repository
west build -b nrf9160_innblue22 samples/sensor/bq274xx
west flash

References