#include <zb_zcl_drlc.h>

Detailed Description

See also: SE spec, Figure D-5

Field Documentation

◆ average_load_adjustment_percentage_applied

zb_int8_t zb_zcl_drlc_report_event_status_payload_s::average_load_adjustment_percentage_applied

Defines Average Load Adjustment Percentage value applied by the device. The value 0x80 means that this field has not been used by the end device.

◆ cooling_temperature_set_point_applied

zb_uint16_t zb_zcl_drlc_report_event_status_payload_s::cooling_temperature_set_point_applied

Defines Cooling Temperature Set Point value applied by the device. The value 0x8000 means that this field has not been used by the end device.

◆ criticality_level_applied

zb_uint8_t zb_zcl_drlc_report_event_status_payload_s::criticality_level_applied

Criticality Level value applied by the device

◆ duty_cycle_applied

zb_uint8_t zb_zcl_drlc_report_event_status_payload_s::duty_cycle_applied

Defines the maximum on state duty cycle applied by the device. The value 0xFF means that this field has not been used by the end device.

◆ event_control

zb_uint8_t zb_zcl_drlc_report_event_status_payload_s::event_control

Identifies additional control options for the event.

◆ event_status

zb_uint8_t zb_zcl_drlc_report_event_status_payload_s::event_status

This field stores value from set of event statuses

◆ event_status_time

zb_uint32_t zb_zcl_drlc_report_event_status_payload_s::event_status_time

UTC Timestamp representing when the event status occurred. This field shall not use the value of 0x00000000.

◆ heating_temperature_set_point_applied

zb_uint16_t zb_zcl_drlc_report_event_status_payload_s::heating_temperature_set_point_applied

Defines Heating Temperature Set Point value applied by the device. The value 0x8000 means that this field has not been used by the end device.

◆ issuer_event_id

zb_uint32_t zb_zcl_drlc_report_event_status_payload_s::issuer_event_id

Unique identifier generated by the Energy provider. The value of this field allows matching of Event reports with a specific Demand Response and Load Control event.

◆ signature

zb_uint8_t zb_zcl_drlc_report_event_status_payload_s::signature[42]

A non-repudiation signature created by using the Matyas-Meyer-Oseas hash function used in conjunction with ECDSA.

◆ signature_type

zb_uint8_t zb_zcl_drlc_report_event_status_payload_s::signature_type

This field is used to enumerate the type of algorithm use to create the signature.

The documentation for this struct was generated from the following file:

/jenkins_workspace/workspace/_Zigbee_build-zboss-docs_release/modules/lib/zboss/include/zcl/zb_zcl_drlc.h

Data Fields
zb_uint32_t	issuer_event_id

zb_uint8_t	event_status

zb_uint32_t	event_status_time

zb_uint8_t	criticality_level_applied

zb_uint16_t	cooling_temperature_set_point_applied

zb_uint16_t	heating_temperature_set_point_applied

zb_int8_t	average_load_adjustment_percentage_applied

zb_uint8_t	duty_cycle_applied

zb_uint8_t	event_control

zb_uint8_t	signature_type

zb_uint8_t	signature [42]

Data Fields