ZCL IAS ACE cluster

Data Structures
struct	zb_zcl_ias_ace_zone_table_s
	Structure representsation of IAS ACE Zone Table see ZCL spec 8.3.2.3, table 8.11. More...
struct	zb_zcl_ias_ace_arm_s
	Structure representsation of Arm command, ZCL spec 8.3.2.4.1.1. More...
struct	zb_zcl_ias_ace_bypass_s
	Structure representsation of Bypass command, ZCL spec 8.3.2.4.2.1. More...
struct	zb_zcl_ias_ace_get_zone_info_s
	Structure representsation of Get Zone Information command, ZCL spec 8.3.2.4.5. More...
struct	zb_zcl_ias_ace_get_zone_status_s
	Structure representsation of Get Zone Status command, ZCL spec 8.3.2.3.8.1. More...
struct	zb_zcl_ias_ace_arm_resp_s
	Structure representation of Arm Response command, ZCL spec 8.3.2.5.1 More...
struct	zb_zcl_ias_ace_get_zone_id_map_resp_s
	Structure representsation of Get Zone ID Map Response command, ZCL spec 8.3.2.5.2.1 More...
struct	zb_zcl_ias_ace_get_zone_info_resp_s
	Structure representsation of Get Zone Information Response command, ZCL spec 8.3.2.5.3.1 see @ ref zb_zcl_ias_ace_zone_table_s. More...
struct	zb_zcl_ias_ace_zone_status_changed_s
	Structure representsation of Zone Status Changed command, ZCL spec 8.3.2.4.4. More...
struct	zb_zcl_ias_ace_panel_status_changed_s
	Structure representsation of Panel Status Changed command, ZCL spec 8.3.2.4.5. More...
struct	zb_zcl_ias_ace_get_panel_status_resp_s
	Structure representsation of Get Panel Status Response command, ZCL spec 8.3.2.4.6. More...
struct	zb_zcl_ias_ace_set_bypassed_zone_list_s
	Structure representsation of Set Bypassed Zone List command, ZCL spec 8.3.2.4.7. More...
struct	zb_zcl_ias_ace_bypass_resp_s
	Structure representsation of Bypass Response command, ZCL spec 8.3.2.4.8. More...
struct	zb_zcl_ias_ace_zone_status_s
	IAS ACE Zone Status structure. More...
struct	zb_zcl_ias_ace_get_zone_status_resp_s
	Structure representsation of Get Zone Status Response command, ZCL spec 8.3.2.4.9. More...

IAS Ace cluster attributes
enum	zb_zcl_ias_ace_attr_e { ZB_ZCL_ATTR_IAS_ACE_ZONE_TABLE_LENGTH_ID = 0xeffe, ZB_ZCL_ATTR_IAS_ACE_ZONE_TABLE_ID = 0xefff }
	IAS Ace cluster custom attribute identifiers. More...
typedef struct zb_zcl_ias_ace_zone_table_s	zb_zcl_ias_ace_zone_table_t
	Structure representsation of IAS ACE Zone Table see ZCL spec 8.3.2.3, table 8.11.
#define	ZB_ZCL_IAS_ACE_CLUSTER_REVISION_DEFAULT   ((zb_uint16_t)0x0001u)
	Default value for IAS ACE cluster revision global attribute.
#define	ZB_ZCL_IAS_ACE_ZONE_TABLE_LENGTH   255
	IAS ACE Zone Table maximum length.
#define	ZB_ZCL_IAS_ACE_ZONE_TYPE_MAX_VALUE   0xfffe
	IAS ACE ZoneType attribute maximum value.
#define	ZB_ZCL_IAS_ACE_ZONE_ID_MAX_VALUE   0xfe
	IAS ACE ZoneID attribute maximum value.
#define	ZB_ZCL_IAS_ACE_ZONE_ID_DEFAULT_VALUE   0
	IAS ACE ZoneID attribute default value.
#define	ZB_ZCL_IAS_ACE_SET_ZONE_ADDRESS_DEFAULT_VALUE(ptr)   (ZB_IEEE_ADDR_COPY(ptr, &g_unknown_ieee_addr))
	IAS ACE Set Zone Address default value.
#define	ZB_ZCL_DECLARE_IAS_ACE_ATTRIB_LIST(attr_list, length, table)
	Declare attribute list for IAS Ace cluster - server side. More...

IAS Ace cluster commands
enum	zb_zcl_ias_ace_cmd_e {   ZB_ZCL_CMD_IAS_ACE_ARM_ID = 0x00, ZB_ZCL_CMD_IAS_ACE_BYPASS_ID = 0x01, ZB_ZCL_CMD_IAS_ACE_EMERGENCY_ID = 0x02, ZB_ZCL_CMD_IAS_ACE_FIRE_ID = 0x03,   ZB_ZCL_CMD_IAS_ACE_PANIC_ID = 0x04, ZB_ZCL_CMD_IAS_ACE_GET_ZONE_ID_MAP_ID = 0x05, ZB_ZCL_CMD_IAS_ACE_GET_ZONE_INFO_ID = 0x06, ZB_ZCL_CMD_IAS_ACE_GET_PANEL_STATUS_ID = 0x07,   ZB_ZCL_CMD_IAS_ACE_GET_BYPASSED_ZONE_LIST_ID = 0x08, ZB_ZCL_CMD_IAS_ACE_GET_ZONE_STATUS_ID = 0x09 }
	IAS Ace cluster command identifiers. More...
enum	zb_zcl_ias_ace_resp_cmd_e {   ZB_ZCL_CMD_IAS_ACE_ARM_RESP_ID = 0x00, ZB_ZCL_CMD_IAS_ACE_GET_ZONE_ID_MAP_RESP_ID = 0x01, ZB_ZCL_CMD_IAS_ACE_GET_ZONE_INFO_RESP_ID = 0x02, ZB_ZCL_CMD_IAS_ACE_ZONE_STATUS_CHANGED_ID = 0x03,   ZB_ZCL_CMD_IAS_ACE_PANEL_STATUS_CHANGED_ID = 0x04, ZB_ZCL_CMD_IAS_ACE_GET_PANEL_STATUS_RESPONSE_ID = 0x05, ZB_ZCL_CMD_IAS_ACE_SET_BYPASSED_ZONE_LIST_ID = 0x06, ZB_ZCL_CMD_IAS_ACE_BYPASS_RESPONSE_ID = 0x07,   ZB_ZCL_CMD_IAS_ACE_GET_ZONE_STATUS_RESPONSE_ID = 0x08 }
	IAS Ace cluster responce command identifiers. More...
enum	zb_zcl_ias_ace_arm_mode_e { ZB_ZCL_IAS_ACE_ARM_MODE_DISARM = 0x00, ZB_ZCL_IAS_ACE_ARM_MODE_DAY = 0x01, ZB_ZCL_IAS_ACE_ARM_MODE_NIGHT = 0x02, ZB_ZCL_IAS_ACE_ARM_MODE_ALL = 0x03 }
	Values of the Arm Mode see ZCL spec 8.3.2.4.1.2. More...
enum	zb_zcl_ias_ace_arm_not_e {   ZB_ZCL_IAS_ACE_ARM_NOT_DISARM = 0x00, ZB_ZCL_IAS_ACE_ARM_NOTIF_ALL_ZONES_DISARMED = 0x00, ZB_ZCL_IAS_ACE_ARM_NOT_DAY = 0x01, ZB_ZCL_IAS_ACE_ARM_NOTIF_ONLY_DAY_HOME_ZONES_ARMED = 0x01,   ZB_ZCL_IAS_ACE_ARM_NOT_NIGHT = 0x02, ZB_ZCL_IAS_ACE_ARM_NOTIF_ONLY_NIGHT_SLEEP_ZONES_ARMED = 0x02, ZB_ZCL_IAS_ACE_ARM_NOT_ALL = 0x03, ZB_ZCL_IAS_ACE_ARM_NOTIF_ALL_ZONES_ARMED = 0x03,   ZB_ZCL_IAS_ACE_ARM_NOTIF_INVALID_ARM_DISARM_CODE = 0x04, ZB_ZCL_IAS_ACE_ARM_NOTIF_NOT_READY_TO_ARM = 0x05, ZB_ZCL_IAS_ACE_ARM_NOTIF_ALREADY_DISARMED = 0x06 }
	Values of the Arm Notification see ZCL8 spec 8.3.2.4.1.2. More...
enum	zb_zcl_ias_ace_aud_notification_e { ZB_ZCL_IAS_ACE_AUD_NOTIFICATION_MUTE = 0x00, ZB_ZCL_IAS_ACE_AUD_NOTIFICATION_DEF_SOUND = 0x01, ZB_ZCL_IAS_ACE_AUD_NOTIFICATION_MANUF_SPECIFIC = 0x80 }
	IAS ACE Audible Notification Field. More...
enum	zb_zcl_ias_ace_panel_status_e {   ZB_ZCL_IAS_ACE_PANEL_STATUS_DISARMED = 0x00, ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMED_STAY = 0x01, ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMED_NIGHT = 0x02, ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMED_AWAY = 0x03,   ZB_ZCL_IAS_ACE_PANEL_STATUS_EXIT_DELAY = 0x04, ZB_ZCL_IAS_ACE_PANEL_STATUS_ENTRY_DELAY = 0x05, ZB_ZCL_IAS_ACE_PANEL_STATUS_NOT_READY = 0x06, ZB_ZCL_IAS_ACE_PANEL_STATUS_IN_ALARM = 0x07,   ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMING_STAY = 0x08, ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMING_NIGHT = 0x09, ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMING_AWAY = 0x0a }
	IAS ACE PanelStatus Parameter. More...
enum	zb_zcl_ias_ace_alarm_status_e {   ZB_ZCL_IAS_ACE_ALARM_STATUS_NO_ALARM = 0x00, ZB_ZCL_IAS_ACE_ALARM_STATUS_BURGLAR = 0x01, ZB_ZCL_IAS_ACE_ALARM_STATUS_FIRE = 0x02, ZB_ZCL_IAS_ACE_ALARM_STATUS_EMERGENCY = 0x03,   ZB_ZCL_IAS_ACE_ALARM_STATUS_POLICE_PANIC = 0x04, ZB_ZCL_IAS_ACE_ALARM_STATUS_FIRE_PANIC = 0x05, ZB_ZCL_IAS_ACE_ALARM_STATUS_EMERGENCY_PANIC = 0x06 }
	IAS ACE Alarm Status Field. More...
enum	zb_zcl_ias_ace_bypass_result_e {   ZB_ZCL_IAS_ACE_BYPASS_RESULT_BYPASSED = 0x00, ZB_ZCL_IAS_ACE_BYPASS_RESULT_NOT_BYPASSED = 0x01, ZB_ZCL_IAS_ACE_BYPASS_RESULT_NOT_ALLOWED = 0x02, ZB_ZCL_IAS_ACE_BYPASS_RESULT_INVALID_ZONE_ID = 0x03,   ZB_ZCL_IAS_ACE_BYPASS_RESULT_UNKNOWN_ZONE_ID = 0x04, ZB_ZCL_IAS_ACE_BYPASS_RESULT_INVALID_ARM_CODE = 0x05 }
	IAS ACE Bypass Result. More...
typedef struct zb_zcl_ias_ace_arm_s	zb_zcl_ias_ace_arm_t
	Structure representsation of Arm command, ZCL spec 8.3.2.4.1.1.
typedef struct zb_zcl_ias_ace_bypass_s	zb_zcl_ias_ace_bypass_t
	Structure representsation of Bypass command, ZCL spec 8.3.2.4.2.1.
typedef struct zb_zcl_ias_ace_get_zone_info_s	zb_zcl_ias_ace_get_zone_info_t
	Structure representsation of Get Zone Information command, ZCL spec 8.3.2.4.5.
typedef struct zb_zcl_ias_ace_get_zone_status_s	zb_zcl_ias_ace_get_zone_status_t
	Structure representsation of Get Zone Status command, ZCL spec 8.3.2.3.8.1.
typedef struct zb_zcl_ias_ace_arm_resp_s	zb_zcl_ias_ace_arm_resp_t
	Structure representation of Arm Response command, ZCL spec 8.3.2.5.1
typedef struct zb_zcl_ias_ace_get_zone_id_map_resp_s	zb_zcl_ias_ace_get_zone_id_map_resp_t
	Structure representsation of Get Zone ID Map Response command, ZCL spec 8.3.2.5.2.1
typedef struct zb_zcl_ias_ace_get_zone_info_resp_s	zb_zcl_ias_ace_get_zone_info_resp_t
	Structure representsation of Get Zone Information Response command, ZCL spec 8.3.2.5.3.1 see @ ref zb_zcl_ias_ace_zone_table_s.
typedef struct zb_zcl_ias_ace_zone_status_changed_s	zb_zcl_ias_ace_zone_status_changed_t
	Structure representsation of Zone Status Changed command, ZCL spec 8.3.2.4.4.
typedef struct zb_zcl_ias_ace_panel_status_changed_s	zb_zcl_ias_ace_panel_status_changed_t
	Structure representsation of Panel Status Changed command, ZCL spec 8.3.2.4.5.
typedef struct zb_zcl_ias_ace_get_panel_status_resp_s	zb_zcl_ias_ace_get_panel_status_resp_t
	Structure representsation of Get Panel Status Response command, ZCL spec 8.3.2.4.6.
typedef struct zb_zcl_ias_ace_set_bypassed_zone_list_s	zb_zcl_ias_ace_set_bypassed_zone_list_t
	Structure representsation of Set Bypassed Zone List command, ZCL spec 8.3.2.4.7.
typedef struct zb_zcl_ias_ace_bypass_resp_s	zb_zcl_ias_ace_bypass_resp_t
	Structure representsation of Bypass Response command, ZCL spec 8.3.2.4.8.
typedef struct zb_zcl_ias_ace_zone_status_s	zb_zcl_ias_ace_zone_status_t
	IAS ACE Zone Status structure.
typedef struct zb_zcl_ias_ace_get_zone_status_resp_s	zb_zcl_ias_ace_get_zone_status_resp_t
	Structure representsation of Get Zone Status Response command, ZCL spec 8.3.2.4.9.
#define	ZB_ZCL_IAS_ACE_ARM_REQ_PAYLOAD_SIZE(ptr)
#define	ZB_ZCL_IAS_ACE_SEND_ARM_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, arm_mode, arm_disarm_code, zone_id)
	Arm command, ZCL spec 8.3.2.4.1. More...
#define	ZB_ZCL_IAS_ACE_GET_ARM_REQ(data_ptr, buffer, status)
	Macro for getting Arm command, see ZCL spec 8.3.2.4.1. More...
#define	ZB_ZCL_IAS_ACE_BYPASS_PAYLOAD_SIZE(ptr)   (zb_uint_t)(1+(ptr)[0]+1+ZB_ZCL_GET_STRING_LENGTH((ptr)+1+(ptr)[0]))
#define	ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_START(buffer, def_resp, length, ptr)
	Start Bypass command, ZCL spec 8.3.2.4.1. More...
#define	ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_ADD(ptr, zone_id)
	Add Zone Id to Bypass command, ZCL spec 8.3.2.4.1. More...
#define	ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_END( ptr, buffer, arm_disarm_code, addr, dst_addr_mode, dst_ep, ep, prfl_id, cb)
	End form Bypass command and send it, ZCL spec 8.3.2.4.1. More...
#define	ZB_ZCL_IAS_ACE_GET_BYPASS_REQ(data_ptr, buffer, status)
	Macro for getting Bypass command, see ZCL spec 8.3.2.4.1. More...
#define	ZB_ZCL_IAS_ACE_SEND_EMERGENCY_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb)
	Emergency command, ZCL spec 8.3.2.4.3. More...
#define	ZB_ZCL_IAS_ACE_SEND_FIRE_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb)
	Fire command, ZCL spec 8.3.2.4.3. More...
#define	ZB_ZCL_IAS_ACE_SEND_PANIC_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb)
	Panic command, ZCL spec 8.3.2.4.3. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_ID_MAP_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb)
	Get Zone ID Map command, ZCL spec 8.3.2.4.4. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_INFO_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, zone_id)
	Get Zone Information command, ZCL spec 8.3.2.4.5. More...
#define	ZB_ZCL_IAS_ACE_GET_GET_ZONE_INFO_REQ(data_ptr, buffer, status)
	Macro for getting Get Zone Information command, ZCL spec 8.3.2.4.5. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_PANEL_STATUS_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb)
	Get Panel Status command, ZCL spec 8.3.2.3.6. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_BYPASSED_ZONE_LIST_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb)
	Get Bypassed Zone List command, ZCL spec 8.3.2.3.7. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, starting_zone_id, max_num_zone_ids, zone_status_mask_flag, zone_status_mask)
	Get Zone Status command, ZCL spec 8.3.2.3.8. More...
#define	ZB_ZCL_IAS_ACE_GET_GET_ZONE_STATUS_REQ(data_ptr, buffer, status)
	Macro for getting Get Zone Status command, ZCL spec 8.3.2.3.8. More...
#define	ZB_ZCL_IAS_ACE_SEND_ARM_RESP( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, seq, arm_notification)
	Arm Response command, ZCL spec 8.3.2.5.1. More...
#define	ZB_ZCL_IAS_ACE_GET_ARM_RESP(data_ptr, buffer, status)
	Macro for getting Arm Response command, ZCL spec 8.3.2.5.1. More...
#define	ZB_ZCL_IAS_ACE_GET_ZONE_ID_MAP_LENGTH   16
	Length of array of Bitmap of Zone ID Map, ZCL spec 8.3.2.5.2.1
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_ID_MAP_RESP( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, seq, zone_id_map)
	Get Zone ID Map Response command, ZCL spec 8.3.2.5.2. More...
#define	ZB_ZCL_IAS_ACE_GET_GET_ZONE_ID_MAP_RESP(data_ptr, buffer, status)
	Macro for getting Get Zone ID Map Response command, ZCL spec 8.3.2.5.2. More...
#define	ZB_ZCL_IAS_ACE_GET_ZONE_INFO_TYPE_NONE   0xffff
	Zone Type is empty, ZCL spec 8.3.2.5.3.1
#define	ZB_ZCL_IAS_ACE_GET_ZONE_INFO_RESP_PAYLOAD_SIZE(ptr)
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_INFO_RESP( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, seq, zone_id, zone_type, address, zone_label)
	Get Zone Information Response command, ZCL spec 8.3.2.5.3. More...
#define	ZB_ZCL_IAS_ACE_GET_GET_ZONE_INFO_RESP(data_ptr, buffer, status)
	Macro for getting Get Zone Information Response command, ZCL spec 8.3.2.5.3. More...
#define	ZB_ZCL_IAS_ACE_ZONE_STATUS_CHANGED_PAYLOAD_SIZE(ptr)
#define	ZB_ZCL_IAS_ACE_SEND_ZONE_STATUS_CHANGED_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, zone_id, zone_status, aud_notification, zone_label)
	Zone Status Changed command, ZCL spec 8.3.2.4.4. More...
#define	ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_CHANGED_REQ(data_ptr, buffer, status)
	Macro for getting Zone Status Changed command, ZCL spec 8.3.2.4.4. More...
#define	ZB_ZCL_IAS_ACE_SEND_PANEL_STATUS_CHANGED_REQ( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, def_resp, cb, panel_status, seconds_remaining, aud_notification, alarm_status)
	Panel Status Changed command, ZCL spec 8.3.2.4.5. More...
#define	ZB_ZCL_IAS_ACE_GET_PANEL_STATUS_CHANGED_REQ(data_ptr, buffer, status)
	Macro for getting Panel Status Changed command, ZCL spec 8.3.2.4.5. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_PANEL_STATUS_RESP( buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, seq, panel_status, seconds_remaining, aud_notification, alarm_status)
	Get Panel Status Response command, ZCL spec 8.3.2.4.6. More...
#define	ZB_ZCL_IAS_ACE_GET_GET_PANEL_STATUS_RESP(data_ptr, buffer, status)
	Macro for getting Get Panel Status Response command, ZCL spec 8.3.2.4.6. More...
#define	ZB_ZCL_IAS_ACE_SET_BYPASSED_ZONE_LIST_PAYLOAD_SIZE(ptr)
#define	ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START( buffer, length, ptr)
	Start Set Bypassed Zone List command, ZCL spec 8.3.2.4.7. More...
#define	ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START_RESP( buffer, seq, length, ptr)
	Start Set Bypassed Zone List command, ZCL spec 8.3.2.4.7 (response to the Get Bypassed Zone List command) More...
#define	ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START_REQ( buffer, def_resp, length, ptr)
	Start Set Bypassed Zone List command, ZCL spec 8.3.2.4.7 (unsolicited request) More...
#define	ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_ADD(ptr, zone_id)
	Add Zone Id to Set Bypassed Zone List command, ZCL spec 8.3.2.4.7. More...
#define	ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_END( ptr, buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, cb)
	End form Set Bypassed Zone List command and send it, ZCL spec 8.3.2.4.7. More...
#define	ZB_ZCL_IAS_ACE_GET_SET_BYPASSED_ZONE_LIST(data_ptr, buffer, status)
	Macro for getting Set Bypassed Zone List command, ZCL spec 8.3.2.4.7. More...
#define	ZB_ZCL_IAS_ACE_BYPASS_RESP_PAYLOAD_SIZE(ptr)
#define	ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_START( buffer, seq, length, ptr)
	Start Bypass Response command, ZCL spec 8.3.2.4.8. More...
#define	ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_ADD(ptr, bypass_result)
	Add Bypass results to Bypass Response command, ZCL spec 8.3.2.4.8. More...
#define	ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_END( ptr, buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id)
	End form Bypass Response command and send it, ZCL spec 8.3.2.4.8. More...
#define	ZB_ZCL_IAS_ACE_GET_BYPASS_RESP(data_ptr, buffer, status)
	Macro for getting Bypass Response command, ZCL spec 8.3.2.4.8. More...
#define	ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_RESP_PAYLOAD_SIZE(ptr)
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_START( buffer, seq, zone_status_complete, length, ptr)
	Get Zone Status Response command, ZCL spec 8.3.2.4.9. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_ADD( ptr, zone_id, zone_status)
	Add Zone Id and Zone Status to Get Zone Status Response command, ZCL spec 8.3.2.4.9. More...
#define	ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_END( ptr, buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id)
	End form Get Zone Status Response command and send it, ZCL spec 8.3.2.4.9. More...
#define	ZB_ZCL_IAS_ACE_GET_GET_ZONE_STATUS_RESP(data_ptr, buffer, status)
	Macro for getting Get Zone Status Response command, ZCL spec 8.3.2.4.9. More...

Detailed Description

Macro Definition Documentation

ZB_ZCL_DECLARE_IAS_ACE_ATTRIB_LIST

#define ZB_ZCL_DECLARE_IAS_ACE_ATTRIB_LIST	(		attr_list,
			length,
			table
	)

Value:

 ZB_ZCL_START_DECLARE_ATTRIB_LIST_CLUSTER_REVISION(attr_list, ZB_ZCL_IAS_ACE) \
 ZB_ZCL_SET_ATTR_DESC(ZB_ZCL_ATTR_IAS_ACE_ZONE_TABLE_LENGTH_ID, (length)) \
 ZB_ZCL_SET_ATTR_DESC(ZB_ZCL_ATTR_IAS_ACE_ZONE_TABLE_ID, (table)) \
 ZB_ZCL_FINISH_DECLARE_ATTRIB_LIST

Declare attribute list for IAS Ace cluster - server side.

Parameters

attr_list	- attribute list name
length	- (zb_uint16_t*) pointer to variable to store Length of IAS ACE Zone Table attribute, see ZCL spec 8.3.2.3, table 8.11
table	- pointer to variable to store IAS ACE Zone Table attribute, see ZCL spec 8.3.2.3, table 8.11

ZB_ZCL_IAS_ACE_ARM_REQ_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_ARM_REQ_PAYLOAD_SIZE

(

ptr

)

Value:

 (sizeof(zb_zcl_ias_ace_arm_t)-sizeof(((zb_zcl_ias_ace_arm_t *)(ptr))->arm_disarm_code)+ \
 1+ZB_ZCL_GET_STRING_LENGTH(((zb_zcl_ias_ace_arm_t *)(ptr))->arm_disarm_code))

Arm request command payload size

ZB_ZCL_IAS_ACE_BYPASS_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_BYPASS_PAYLOAD_SIZE

(

ptr

)

(zb_uint_t)(1+(ptr)[0]+1+ZB_ZCL_GET_STRING_LENGTH((ptr)+1+(ptr)[0]))

Bypass command payload size

ZB_ZCL_IAS_ACE_BYPASS_RESP_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_BYPASS_RESP_PAYLOAD_SIZE

(

ptr

)

Value:

 (sizeof(zb_zcl_ias_ace_bypass_resp_t)-sizeof(((zb_zcl_ias_ace_bypass_resp_t *)(ptr))->bypass_result)+ \
 ((zb_zcl_ias_ace_bypass_resp_t *)(ptr))->length)

Bypass Response command payload size

ZB_ZCL_IAS_ACE_GET_ARM_REQ

#define ZB_ZCL_IAS_ACE_GET_ARM_REQ	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < \
 ZB_ZCL_IAS_ACE_ARM_REQ_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->arm_mode, data); \
 ZB_ZCL_PACKET_GET_STATIC_STRING((data_ptr)->arm_disarm_code, data); \
 if (!data) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->zone_id, data); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
 } \
}

Macro for getting Arm command, see ZCL spec 8.3.2.4.1.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_arm_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_ARM_RESP

#define ZB_ZCL_IAS_ACE_GET_ARM_RESP	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 if (zb_buf_len((buffer)) < sizeof(zb_zcl_ias_ace_arm_resp_t)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 zb_zcl_ias_ace_arm_resp_t *src_ptr = \
 (zb_zcl_ias_ace_arm_resp_t*)zb_buf_begin((buffer)); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 (data_ptr)->arm_notification = src_ptr->arm_notification; \
 } \
}

Macro for getting Arm Response command, ZCL spec 8.3.2.5.1.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_arm_resp_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_BYPASS_REQ

#define ZB_ZCL_IAS_ACE_GET_BYPASS_REQ	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < ZB_ZCL_IAS_ACE_BYPASS_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->length, data); \
 ZB_ZCL_PACKET_GET_DATA_N((data_ptr)->zone_id, data, (data_ptr)->length); \
 ZB_ZCL_PACKET_GET_STATIC_STRING((data_ptr)->arm_disarm_code, data); \
 if (!data) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
 } \
}

Macro for getting Bypass command, see ZCL spec 8.3.2.4.1.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_bypass_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_BYPASS_RESP

#define ZB_ZCL_IAS_ACE_GET_BYPASS_RESP	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < ZB_ZCL_IAS_ACE_BYPASS_RESP_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->length, data); \
 ZB_ZCL_PACKET_GET_DATA_N((data_ptr)->bypass_result, data, (data_ptr)->length); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
}

Macro for getting Bypass Response command, ZCL spec 8.3.2.4.8.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_bypass_resp_t.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_GET_PANEL_STATUS_RESP

#define ZB_ZCL_IAS_ACE_GET_GET_PANEL_STATUS_RESP	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < sizeof(zb_zcl_ias_ace_panel_status_changed_t)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->panel_status, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->seconds_remaining, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->aud_notification, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->alarm_status, data); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
}

Macro for getting Get Panel Status Response command, ZCL spec 8.3.2.4.6.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_get_panel_status_resp_t.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_GET_ZONE_ID_MAP_RESP

#define ZB_ZCL_IAS_ACE_GET_GET_ZONE_ID_MAP_RESP	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 if (zb_buf_len((buffer)) < sizeof(zb_zcl_ias_ace_get_zone_id_map_resp_t)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 zb_uint8_t i; \
 zb_zcl_ias_ace_get_zone_id_map_resp_t *src_ptr = \
 (zb_zcl_ias_ace_get_zone_id_map_resp_t*)zb_buf_begin((buffer)); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 for(i=0; i<ZB_ZCL_IAS_ACE_GET_ZONE_ID_MAP_LENGTH; i++) \
 { \
 ZB_HTOLE16(&((data_ptr)->zone_id_map[i]), &(src_ptr->zone_id_map[i])); \
 } \
 } \
}

Macro for getting Get Zone ID Map Response command, ZCL spec 8.3.2.5.2.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_get_zone_id_map_resp_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_GET_ZONE_INFO_REQ

#define ZB_ZCL_IAS_ACE_GET_GET_ZONE_INFO_REQ	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 if (zb_buf_len((buffer)) < sizeof(zb_zcl_ias_ace_get_zone_info_t)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 zb_zcl_ias_ace_get_zone_info_t *src_ptr = \
 (zb_zcl_ias_ace_get_zone_info_t*)zb_buf_begin((buffer)); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 (data_ptr)->zone_id = src_ptr->zone_id; \
 } \
}

Macro for getting Get Zone Information command, ZCL spec 8.3.2.4.5.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_get_zone_info_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_GET_ZONE_INFO_RESP

#define ZB_ZCL_IAS_ACE_GET_GET_ZONE_INFO_RESP	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < ZB_ZCL_IAS_ACE_GET_ZONE_INFO_RESP_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->zone_id, data); \
 ZB_ZCL_PACKET_GET_DATA16(&(data_ptr)->zone_type, data); \
 ZB_ZCL_PACKET_GET_DATA_IEEE(&(data_ptr)->address, data); \
 ZB_ZCL_PACKET_GET_STATIC_STRING((data_ptr)->zone_label, data); \
 if (!data) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
 } \
}

Macro for getting Get Zone Information Response command, ZCL spec 8.3.2.5.3.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_get_zone_info_resp_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_GET_ZONE_STATUS_REQ

#define ZB_ZCL_IAS_ACE_GET_GET_ZONE_STATUS_REQ	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 if (zb_buf_len((buffer)) < sizeof(zb_zcl_ias_ace_get_zone_status_t)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 zb_zcl_ias_ace_get_zone_status_t *src_ptr = \
 (zb_zcl_ias_ace_get_zone_status_t*)zb_buf_begin((buffer)); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 (data_ptr)->starting_zone_id = src_ptr->starting_zone_id; \
 (data_ptr)->max_num_zone_ids = src_ptr->max_num_zone_ids; \
 (data_ptr)->zone_status_mask_flag = src_ptr->zone_status_mask_flag; \
 ZB_HTOLE16(&((data_ptr)->zone_status_mask), &(src_ptr->zone_status_mask)); \
 } \
}

Macro for getting Get Zone Status command, ZCL spec 8.3.2.3.8.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_get_zone_status_s.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_GET_ZONE_STATUS_RESP

#define ZB_ZCL_IAS_ACE_GET_GET_ZONE_STATUS_RESP	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_RESP_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->zone_status_complete, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->length, data); \
 ZB_ZCL_PACKET_GET_DATA_N((data_ptr)->zone_id_status, data, \
 (data_ptr)->length * sizeof(zb_zcl_ias_ace_zone_status_t)); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
}

Macro for getting Get Zone Status Response command, ZCL spec 8.3.2.4.9.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_get_zone_status_resp_t.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_PANEL_STATUS_CHANGED_REQ

#define ZB_ZCL_IAS_ACE_GET_PANEL_STATUS_CHANGED_REQ	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < sizeof(zb_zcl_ias_ace_panel_status_changed_t)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->panel_status, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->seconds_remaining, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->aud_notification, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->alarm_status, data); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
}

Macro for getting Panel Status Changed command, ZCL spec 8.3.2.4.5.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_panel_status_changed_t.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_SET_BYPASSED_ZONE_LIST

#define ZB_ZCL_IAS_ACE_GET_SET_BYPASSED_ZONE_LIST	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < ZB_ZCL_IAS_ACE_SET_BYPASSED_ZONE_LIST_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->length, data); \
 ZB_ZCL_PACKET_GET_DATA_N((data_ptr)->zone_id, data, (data_ptr)->length); \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
}

Macro for getting Set Bypassed Zone List command, ZCL spec 8.3.2.4.7.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_set_bypassed_zone_list_t.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_ZONE_INFO_RESP_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_GET_ZONE_INFO_RESP_PAYLOAD_SIZE

(

ptr

)

Value:

 (sizeof(zb_zcl_ias_ace_get_zone_info_resp_t)-sizeof(((zb_zcl_ias_ace_get_zone_info_resp_t *)(ptr))->zone_label)+ \
 1+ZB_ZCL_GET_STRING_LENGTH(((zb_zcl_ias_ace_get_zone_info_resp_t *)(ptr))->zone_label))

Get Zone Information Response command payload size

ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_CHANGED_REQ

#define ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_CHANGED_REQ	(		data_ptr,
			buffer,
			status
	)

Value:

{ \
 zb_uint8_t *data = zb_buf_begin(buffer); \
 if (zb_buf_len((buffer)) < ZB_ZCL_IAS_ACE_ZONE_STATUS_CHANGED_PAYLOAD_SIZE(data)) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->zone_id, data); \
 ZB_ZCL_PACKET_GET_DATA16(&(data_ptr)->zone_status, data); \
 ZB_ZCL_PACKET_GET_DATA8(&(data_ptr)->aud_notification, data); \
 ZB_ZCL_PACKET_GET_STATIC_STRING((data_ptr)->zone_label, data); \
 if (!data) \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_FAILURE; \
 } \
 else \
 { \
 (status) = ZB_ZCL_PARSE_STATUS_SUCCESS; \
 } \
 } \
}

Macro for getting Zone Status Changed command, ZCL spec 8.3.2.4.4.

Attention

Assumes that ZCL header already cut.

Parameters

data_ptr	- pointer to a variable of type zb_zcl_ias_ace_zone_status_changed_t.
buffer	containing the packet (by pointer).
status	- variable to put parse status to (see zb_zcl_parse_status_t).

ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_RESP_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_GET_ZONE_STATUS_RESP_PAYLOAD_SIZE

(

ptr

)

Value:

 ((sizeof(zb_zcl_ias_ace_get_zone_status_resp_t)-sizeof(((zb_zcl_ias_ace_get_zone_status_resp_t *)(ptr))->zone_id_status))+ \
 ((zb_zcl_ias_ace_get_zone_status_resp_t *)(ptr))->length * sizeof(zb_zcl_ias_ace_zone_status_t))

Get Zone Status Response command payload size

ZB_ZCL_IAS_ACE_SEND_ARM_REQ

#define ZB_ZCL_IAS_ACE_SEND_ARM_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			arm_mode,
			arm_disarm_code,
			zone_id
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_ARM_ID); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (arm_mode)); \
 ZB_ZCL_PACKET_PUT_STRING(ptr, (arm_disarm_code)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Arm command, ZCL spec 8.3.2.4.1.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
arm_mode	- Arm Mode, see zb_zcl_ias_ace_arm_mode_e
arm_disarm_code	- Arm/Disarm Code string
zone_id	- Zone ID

ZB_ZCL_IAS_ACE_SEND_ARM_RESP

#define ZB_ZCL_IAS_ACE_SEND_ARM_RESP	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			seq,
			arm_notification
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_ARM_RESP_ID); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (arm_notification)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, NULL); \
}

Arm Response command, ZCL spec 8.3.2.5.1.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
seq	- sequence
arm_notification	- Arm Notification, see zb_zcl_ias_ace_arm_not_e

ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_ADD

#define ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_ADD	(		ptr,
			zone_id
	)

Value:

{ \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
}

Add Zone Id to Bypass command, ZCL spec 8.3.2.4.1.

Parameters

ptr	- [in/out] (zb_uint8_t*) current position
zone_id	- Zone ID, see zb_zcl_ias_ace_zone_table_s

ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_END

#define ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_END	(		ptr,
			buffer,
			arm_disarm_code,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			cb
	)

Value:

{ \
 ZB_ZCL_PACKET_PUT_STRING(ptr, (arm_disarm_code)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

End form Bypass command and send it, ZCL spec 8.3.2.4.1.

Parameters

ptr	- (zb_uint8_t*) current position
buffer	- to put packet to
arm_disarm_code	- Arm/Disarm Code string
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_START

#define ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_START	(		buffer,
			def_resp,
			length,
			ptr
	)

Value:

{ \
 (ptr) = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_BYPASS_ID); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (length)); \
}

Start Bypass command, ZCL spec 8.3.2.4.1.

Parameters

buffer	- to put packet to
def_resp	- enable/disable default response
length	- Number of Zones
ptr	- [out] (zb_uint8_t*) current position for ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_ADD and ZB_ZCL_IAS_ACE_SEND_BYPASS_REQ_END

ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_ADD

#define ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_ADD	(		ptr,
			bypass_result
	)

Value:

{ \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (bypass_result)); \
}

Add Bypass results to Bypass Response command, ZCL spec 8.3.2.4.8.

Parameters

ptr	- [in/out] (zb_uint8_t*) current position
bypass_result	- Bypass Result for Zone IDs, see zb_zcl_ias_ace_bypass_result_e

ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_END

#define ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_END	(		ptr,
			buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id
	)

Value:

{ \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, NULL); \
}

End form Bypass Response command and send it, ZCL spec 8.3.2.4.8.

Parameters

ptr	- (zb_uint8_t*) current position
buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier

ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_START

#define ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_START	(		buffer,
			seq,
			length,
			ptr
	)

Value:

{ \
 (ptr) = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_BYPASS_RESPONSE_ID); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (length)); \
}

Start Bypass Response command, ZCL spec 8.3.2.4.8.

Parameters

buffer	- to put packet to
seq	- sequence
length	- Number of Zones
ptr	- [out] (zb_uint8_t*) current position for ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_ADD and ZB_ZCL_IAS_ACE_SEND_BYPASS_RESP_END

ZB_ZCL_IAS_ACE_SEND_EMERGENCY_REQ

#define ZB_ZCL_IAS_ACE_SEND_EMERGENCY_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_EMERGENCY_ID); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Emergency command, ZCL spec 8.3.2.4.3.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_FIRE_REQ

#define ZB_ZCL_IAS_ACE_SEND_FIRE_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_FIRE_ID); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Fire command, ZCL spec 8.3.2.4.3.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_GET_BYPASSED_ZONE_LIST_REQ

#define ZB_ZCL_IAS_ACE_SEND_GET_BYPASSED_ZONE_LIST_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_GET_BYPASSED_ZONE_LIST_ID); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Get Bypassed Zone List command, ZCL spec 8.3.2.3.7.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_GET_PANEL_STATUS_REQ

#define ZB_ZCL_IAS_ACE_SEND_GET_PANEL_STATUS_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_GET_PANEL_STATUS_ID); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Get Panel Status command, ZCL spec 8.3.2.3.6.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_GET_PANEL_STATUS_RESP

#define ZB_ZCL_IAS_ACE_SEND_GET_PANEL_STATUS_RESP	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			seq,
			panel_status,
			seconds_remaining,
			aud_notification,
			alarm_status
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_GET_PANEL_STATUS_RESPONSE_ID); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (panel_status)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (seconds_remaining)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (aud_notification)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (alarm_status)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, NULL); \
}

Get Panel Status Response command, ZCL spec 8.3.2.4.6.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
seq	- sequence
panel_status	- Panel Status, see zb_zcl_ias_ace_panel_status_e
seconds_remaining	- Seconds Remaining Parameter
aud_notification	- Audible Notification, see zb_zcl_ias_ace_aud_notification_e
alarm_status	- Alarm Status Field, see zb_zcl_ias_ace_alarm_status_e

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_ID_MAP_REQ

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_ID_MAP_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_GET_ZONE_ID_MAP_ID); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Get Zone ID Map command, ZCL spec 8.3.2.4.4.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_ID_MAP_RESP

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_ID_MAP_RESP	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			seq,
			zone_id_map
	)

Value:

{ \
 zb_uint8_t i; \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_GET_ZONE_ID_MAP_RESP_ID); \
 for(i=0; i<ZB_ZCL_IAS_ACE_GET_ZONE_ID_MAP_LENGTH; i++) \
 { \
 ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, (zone_id_map)[i]); \
 } \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, NULL); \
}

Get Zone ID Map Response command, ZCL spec 8.3.2.5.2.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
seq	- sequence
zone_id_map	- Zone ID Map, array[16] of zb_uint16_t

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_INFO_REQ

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_INFO_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			zone_id
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_GET_ZONE_INFO_ID); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Get Zone Information command, ZCL spec 8.3.2.4.5.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
zone_id	- Zone ID, see zb_zcl_ias_ace_zone_table_s

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_INFO_RESP

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_INFO_RESP	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			seq,
			zone_id,
			zone_type,
			address,
			zone_label
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_GET_ZONE_INFO_RESP_ID); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
 ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, (zone_type)); \
 ZB_ZCL_PACKET_PUT_DATA_IEEE(ptr, (address)); \
 ZB_ZCL_PACKET_PUT_STRING(ptr, (zone_label)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, NULL); \
}

Get Zone Information Response command, ZCL spec 8.3.2.5.3.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
seq	- sequence
zone_id	- Zone ID
zone_type	- Zone Type, see zb_zcl_ias_zone_zonetype_e
address	- Zone Address
zone_label	- Zone Label Field

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_REQ

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			starting_zone_id,
			max_num_zone_ids,
			zone_status_mask_flag,
			zone_status_mask
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_GET_ZONE_STATUS_ID); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (starting_zone_id)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (max_num_zone_ids)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_status_mask_flag)); \
 ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, (zone_status_mask)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Get Zone Status command, ZCL spec 8.3.2.3.8.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
starting_zone_id	- Starting Zone ID, see zb_zcl_ias_ace_zone_table_s
max_num_zone_ids	- Max Number of Zone IDs Requested Field
zone_status_mask_flag	- Zone Status Mask Flag Field
zone_status_mask	- Zone Status Mask Field

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_ADD

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_ADD	(		ptr,
			zone_id,
			zone_status
	)

Value:

{ \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_status)); \
}

Add Zone Id and Zone Status to Get Zone Status Response command, ZCL spec 8.3.2.4.9.

Parameters

ptr	- [in/out] (zb_uint8_t*) current position
zone_id	- Zone ID, see zb_zcl_ias_ace_zone_table_s
zone_status	- Zone Status, see zb_zcl_ias_zone_zonestatus_e

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_END

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_END	(		ptr,
			buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id
	)

Value:

{ \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, NULL); \
}

End form Get Zone Status Response command and send it, ZCL spec 8.3.2.4.9.

Parameters

ptr	- (zb_uint8_t*) current position
buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier

ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_START

#define ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_START	(		buffer,
			seq,
			zone_status_complete,
			length,
			ptr
	)

Value:

{ \
 (ptr) = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_GET_ZONE_STATUS_RESPONSE_ID); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (zone_status_complete)); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (length)); \
}

Get Zone Status Response command, ZCL spec 8.3.2.4.9.

Parameters

buffer	- to put packet to
seq	- sequence
zone_status_complete	- Zone Status Complete
length	- Number of Zones
ptr	- [out] (zb_uint8_t*) current position for ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_ADD and ZB_ZCL_IAS_ACE_SEND_GET_ZONE_STATUS_RESP_END

ZB_ZCL_IAS_ACE_SEND_PANEL_STATUS_CHANGED_REQ

#define ZB_ZCL_IAS_ACE_SEND_PANEL_STATUS_CHANGED_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			panel_status,
			seconds_remaining,
			aud_notification,
			alarm_status
	)

Value:

{ \
 zb_uint8_t* ptr = zb_zcl_start_command_header(buffer, \
 ZB_ZCL_CONSTRUCT_FRAME_CONTROL( \
 ZB_ZCL_FRAME_TYPE_CLUSTER_SPECIFIC, \
 ZB_ZCL_NOT_MANUFACTURER_SPECIFIC, \
 ZB_ZCL_FRAME_DIRECTION_TO_CLI, \
 (def_resp)), \
 0, /* No manuf_code */ \
 ZB_ZCL_CMD_IAS_ACE_PANEL_STATUS_CHANGED_ID, \
 NULL); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (panel_status)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (seconds_remaining)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (aud_notification)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (alarm_status)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Panel Status Changed command, ZCL spec 8.3.2.4.5.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
panel_status	- Panel Status, see zb_zcl_ias_ace_panel_status_e
seconds_remaining	- Seconds Remaining Parameter
aud_notification	- Audible Notification, see zb_zcl_ias_ace_aud_notification_e
alarm_status	- Alarm Status Field, see zb_zcl_ias_ace_alarm_status_e

ZB_ZCL_IAS_ACE_SEND_PANIC_REQ

#define ZB_ZCL_IAS_ACE_SEND_PANIC_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb
	)

Value:

{ \
 zb_uint8_t* ptr = ZB_ZCL_START_PACKET_REQ(buffer) \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_REQ_FRAME_CONTROL(ptr, (def_resp)) \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER_REQ(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_PANIC_ID); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Panic command, ZCL spec 8.3.2.4.3.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_ADD

#define ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_ADD	(		ptr,
			zone_id
	)

Value:

{ \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
}

Add Zone Id to Set Bypassed Zone List command, ZCL spec 8.3.2.4.7.

Parameters

ptr	- [in/out] (zb_uint8_t*) current position
zone_id	- Zone ID, see zb_zcl_ias_ace_zone_table_s

ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_END

#define ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_END	(		ptr,
			buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			cb
	)

Value:

{ \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

End form Set Bypassed Zone List command and send it, ZCL spec 8.3.2.4.7.

Parameters

ptr	- (zb_uint8_t*) current position
buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
cb	- callback for getting command send status

ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START

#define ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START	(		buffer,
			length,
			ptr
	)

Value:

{ \
 (ptr) = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, ZB_ZCL_GET_SEQ_NUM(), \
 ZB_ZCL_CMD_IAS_ACE_SET_BYPASSED_ZONE_LIST_ID); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (length)); \
}

Start Set Bypassed Zone List command, ZCL spec 8.3.2.4.7.

Parameters

buffer	- to put packet to
length	- Number of Zones
ptr	- [out] (zb_uint8_t*) current position for ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_ADD and ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_END

ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START_REQ

#define ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START_REQ	(		buffer,
			def_resp,
			length,
			ptr
	)

Value:

{ \
 (ptr) = zb_zcl_start_command_header(buffer, \
 ZB_ZCL_CONSTRUCT_FRAME_CONTROL( \
 ZB_ZCL_FRAME_TYPE_CLUSTER_SPECIFIC, \
 ZB_ZCL_NOT_MANUFACTURER_SPECIFIC, \
 ZB_ZCL_FRAME_DIRECTION_TO_CLI, \
 (def_resp)), \
 0, /* No manuf_code */ \
 ZB_ZCL_CMD_IAS_ACE_SET_BYPASSED_ZONE_LIST_ID, \
 NULL); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (length)); \
}

Start Set Bypassed Zone List command, ZCL spec 8.3.2.4.7 (unsolicited request)

Parameters

buffer	- to put packet to
def_resp	- enable/disable default response
length	- Number of Zones
ptr	- [out] (zb_uint8_t*) current position for ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_ADD and ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_END

ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START_RESP

#define ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_START_RESP	(		buffer,
			seq,
			length,
			ptr
	)

Value:

{ \
 (ptr) = ZB_ZCL_START_PACKET(buffer); \
 ZB_ZCL_CONSTRUCT_SPECIFIC_COMMAND_RES_FRAME_CONTROL(ptr); \
 ZB_ZCL_CONSTRUCT_COMMAND_HEADER(ptr, seq, \
 ZB_ZCL_CMD_IAS_ACE_SET_BYPASSED_ZONE_LIST_ID); \
 ZB_ZCL_PACKET_PUT_DATA8((ptr), (length)); \
}

Start Set Bypassed Zone List command, ZCL spec 8.3.2.4.7 (response to the Get Bypassed Zone List command)

Parameters

buffer	- to put packet to
seq	- sequence
length	- Number of Zones
ptr	- [out] (zb_uint8_t*) current position for ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_ADD and ZB_ZCL_IAS_ACE_SEND_SET_BYPASSED_ZONE_LIST_END

ZB_ZCL_IAS_ACE_SEND_ZONE_STATUS_CHANGED_REQ

#define ZB_ZCL_IAS_ACE_SEND_ZONE_STATUS_CHANGED_REQ	(		buffer,
			addr,
			dst_addr_mode,
			dst_ep,
			ep,
			prfl_id,
			def_resp,
			cb,
			zone_id,
			zone_status,
			aud_notification,
			zone_label
	)

Value:

{ \
 zb_uint8_t* ptr = zb_zcl_start_command_header(buffer, \
 ZB_ZCL_CONSTRUCT_FRAME_CONTROL( \
 ZB_ZCL_FRAME_TYPE_CLUSTER_SPECIFIC, \
 ZB_ZCL_NOT_MANUFACTURER_SPECIFIC, \
 ZB_ZCL_FRAME_DIRECTION_TO_CLI, \
 (def_resp)), \
 0, /* No manuf_code */ \
 ZB_ZCL_CMD_IAS_ACE_ZONE_STATUS_CHANGED_ID, \
 NULL); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (zone_id)); \
 ZB_ZCL_PACKET_PUT_DATA16_VAL(ptr, (zone_status)); \
 ZB_ZCL_PACKET_PUT_DATA8(ptr, (aud_notification)); \
 ZB_ZCL_PACKET_PUT_STRING(ptr, (zone_label)); \
 ZB_ZCL_FINISH_PACKET((buffer), ptr) \
 ZB_ZCL_SEND_COMMAND_SHORT( \
 buffer, addr, dst_addr_mode, dst_ep, ep, prfl_id, \
 ZB_ZCL_CLUSTER_ID_IAS_ACE, cb); \
}

Zone Status Changed command, ZCL spec 8.3.2.4.4.

Parameters

buffer	- to put packet to
addr	- address to send packet to
dst_addr_mode	- addressing mode
dst_ep	- destination endpoint
ep	- sending endpoint
prfl_id	- profile identifier
def_resp	- enable/disable default response
cb	- callback for getting command send status
zone_id	- Zone ID
zone_status	- Zone Status, see zb_zcl_ias_zone_zonestatus_e
aud_notification	- Audible Notification, see zb_zcl_ias_ace_aud_notification_e
zone_label	- Zone Label Field

ZB_ZCL_IAS_ACE_SET_BYPASSED_ZONE_LIST_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_SET_BYPASSED_ZONE_LIST_PAYLOAD_SIZE

(

ptr

)

Value:

 (sizeof(zb_zcl_ias_ace_set_bypassed_zone_list_t)-sizeof(((zb_zcl_ias_ace_set_bypassed_zone_list_t *)(ptr))->zone_id)+ \
 ((zb_zcl_ias_ace_set_bypassed_zone_list_t *)(ptr))->length)

Set Bypassed Zone List command payload size

ZB_ZCL_IAS_ACE_ZONE_STATUS_CHANGED_PAYLOAD_SIZE

#define ZB_ZCL_IAS_ACE_ZONE_STATUS_CHANGED_PAYLOAD_SIZE

(

ptr

)

Value:

 (sizeof(zb_zcl_ias_ace_zone_status_changed_t)-sizeof(((zb_zcl_ias_ace_zone_status_changed_t *)(ptr))->zone_label)+ \
 1+ZB_ZCL_GET_STRING_LENGTH(((zb_zcl_ias_ace_zone_status_changed_t *)(ptr))->zone_label))

Zone Status Changed command payload size

Enumeration Type Documentation

zb_zcl_ias_ace_alarm_status_e

enum zb_zcl_ias_ace_alarm_status_e

IAS ACE Alarm Status Field.

See also

ZCL spec 8.3.2.4.5.4

Enumerator
ZB_ZCL_IAS_ACE_ALARM_STATUS_NO_ALARM	No alarm
ZB_ZCL_IAS_ACE_ALARM_STATUS_BURGLAR	Burglar
ZB_ZCL_IAS_ACE_ALARM_STATUS_FIRE	Fire
ZB_ZCL_IAS_ACE_ALARM_STATUS_EMERGENCY	Emergency
ZB_ZCL_IAS_ACE_ALARM_STATUS_POLICE_PANIC	Police Panic
ZB_ZCL_IAS_ACE_ALARM_STATUS_FIRE_PANIC	Fire Panic
ZB_ZCL_IAS_ACE_ALARM_STATUS_EMERGENCY_PANIC	Emergency Panic

zb_zcl_ias_ace_arm_mode_e

enum zb_zcl_ias_ace_arm_mode_e

Values of the Arm Mode see ZCL spec 8.3.2.4.1.2.

Enumerator
ZB_ZCL_IAS_ACE_ARM_MODE_DISARM	Disarm
ZB_ZCL_IAS_ACE_ARM_MODE_DAY	Arm Day/Home Zones Only
ZB_ZCL_IAS_ACE_ARM_MODE_NIGHT	Arm Night/Sleep Zones Only
ZB_ZCL_IAS_ACE_ARM_MODE_ALL	Arm All Zones

zb_zcl_ias_ace_arm_not_e

enum zb_zcl_ias_ace_arm_not_e

Values of the Arm Notification see ZCL8 spec 8.3.2.4.1.2.

Enumerator
ZB_ZCL_IAS_ACE_ARM_NOT_DISARM	All Zones Disarmed. Deprecated: Enumerator is deprecated. It will be removed after February 2023. Use ZB_ZCL_IAS_ACE_ARM_NOTIF_ALL_ZONES_DISARMED instead.
ZB_ZCL_IAS_ACE_ARM_NOTIF_ALL_ZONES_DISARMED	All Zones Disarmed.
ZB_ZCL_IAS_ACE_ARM_NOT_DAY	Only Day/Home Zones Armed. Deprecated: Enumerator is deprecated. It will be removed after February 2023. Use ZB_ZCL_IAS_ACE_ARM_NOTIF_ONLY_DAY_HOME_ZONES_ARMED instead.
ZB_ZCL_IAS_ACE_ARM_NOTIF_ONLY_DAY_HOME_ZONES_ARMED	Only Day/Home Zones Armed.
ZB_ZCL_IAS_ACE_ARM_NOT_NIGHT	Only Night/Sleep Zones Armed. Deprecated: Enumerator is deprecated. It will be removed after February 2023. Use ZB_ZCL_IAS_ACE_ARM_NOTIF_ONLY_NIGHT_SLEEP_ZONES_ARMED instead.
ZB_ZCL_IAS_ACE_ARM_NOTIF_ONLY_NIGHT_SLEEP_ZONES_ARMED	Only Night/Sleep Zones Armed.
ZB_ZCL_IAS_ACE_ARM_NOT_ALL	All Zones Armed. Deprecated: Enumerator is deprecated. It will be removed after February 2023. Use ZB_ZCL_IAS_ACE_ARM_NOTIF_ALL_ZONES_ARMED instead.
ZB_ZCL_IAS_ACE_ARM_NOTIF_ALL_ZONES_ARMED	All Zones Armed.
ZB_ZCL_IAS_ACE_ARM_NOTIF_INVALID_ARM_DISARM_CODE	Invalid Arm/Disarm Code.
ZB_ZCL_IAS_ACE_ARM_NOTIF_NOT_READY_TO_ARM	Not ready to arm.
ZB_ZCL_IAS_ACE_ARM_NOTIF_ALREADY_DISARMED	Already disarmed.

zb_zcl_ias_ace_attr_e

enum zb_zcl_ias_ace_attr_e

IAS Ace cluster custom attribute identifiers.

Enumerator
ZB_ZCL_ATTR_IAS_ACE_ZONE_TABLE_LENGTH_ID	Ace table length, ZCL spec 8.3.2.3.
ZB_ZCL_ATTR_IAS_ACE_ZONE_TABLE_ID	Ace table ZCL spec 8.3.2.3.

zb_zcl_ias_ace_aud_notification_e

enum zb_zcl_ias_ace_aud_notification_e

IAS ACE Audible Notification Field.

See also

ZCL spec 8.3.2.4.4.4

Enumerator
ZB_ZCL_IAS_ACE_AUD_NOTIFICATION_MUTE	Mute (i.e., no audible notification)
ZB_ZCL_IAS_ACE_AUD_NOTIFICATION_DEF_SOUND	Default sound
ZB_ZCL_IAS_ACE_AUD_NOTIFICATION_MANUF_SPECIFIC	Manufacturer specific

zb_zcl_ias_ace_bypass_result_e

enum zb_zcl_ias_ace_bypass_result_e

IAS ACE Bypass Result.

See also

ZCL spec 8.3.2.4.8.3

Enumerator
ZB_ZCL_IAS_ACE_BYPASS_RESULT_BYPASSED	The Zone ID requested to be bypassed is successful. Zone is bypassed.
ZB_ZCL_IAS_ACE_BYPASS_RESULT_NOT_BYPASSED	The Zone ID requested to be bypassed is unsuccessful. Zone is not bypassed.
ZB_ZCL_IAS_ACE_BYPASS_RESULT_NOT_ALLOWED	The Zone ID requested to be bypassed is not eligible to be bypassed per the policy or user configurations on the IAS ACE server. Zone is not bypassed.
ZB_ZCL_IAS_ACE_BYPASS_RESULT_INVALID_ZONE_ID	The Zone ID requested to be bypassed is not in the valid range of Zone IDs.
ZB_ZCL_IAS_ACE_BYPASS_RESULT_UNKNOWN_ZONE_ID	The Zone ID requested to be bypassed is in the valid range of Zone IDs, but the IAS ACE server does not have a record of the Zone ID requested.
ZB_ZCL_IAS_ACE_BYPASS_RESULT_INVALID_ARM_CODE	A value returned indicating that the Arm/Disarm Code was entered incorrectly.

zb_zcl_ias_ace_cmd_e

enum zb_zcl_ias_ace_cmd_e

IAS Ace cluster command identifiers.

See also

ZCL spec, IAS Ace Cluster, 8.3.2.4

Enumerator
ZB_ZCL_CMD_IAS_ACE_ARM_ID	Arm command, ZCL spec 8.3.2.4.1
ZB_ZCL_CMD_IAS_ACE_BYPASS_ID	Bypass command, ZCL spec 8.3.2.4.2
ZB_ZCL_CMD_IAS_ACE_EMERGENCY_ID	Emergency command, ZCL spec 8.3.2.4.3
ZB_ZCL_CMD_IAS_ACE_FIRE_ID	Fire command, ZCL spec 8.3.2.4.3
ZB_ZCL_CMD_IAS_ACE_PANIC_ID	Panic command, ZCL spec 8.3.2.4.3
ZB_ZCL_CMD_IAS_ACE_GET_ZONE_ID_MAP_ID	Get Zone ID Map command, ZCL spec 8.3.2.4.4
ZB_ZCL_CMD_IAS_ACE_GET_ZONE_INFO_ID	Get Zone Information command, ZCL spec 8.3.2.4.5
ZB_ZCL_CMD_IAS_ACE_GET_PANEL_STATUS_ID	This command is used by ACE clients to request an update to the status (e.g. security system arm state) of the ACE server (i.e. the IAS CIE)
ZB_ZCL_CMD_IAS_ACE_GET_BYPASSED_ZONE_LIST_ID	Provides IAS ACE clients with a way to retrieve the list of zones to be bypassed.
ZB_ZCL_CMD_IAS_ACE_GET_ZONE_STATUS_ID	This command is used by ACE clients to request an update of the status of the IAS Zone devices managed by the ACE server (i.e. the IAS CIE).

zb_zcl_ias_ace_panel_status_e

enum zb_zcl_ias_ace_panel_status_e

IAS ACE PanelStatus Parameter.

See also

ZCL spec 8.3.2.4.5.2

Enumerator
ZB_ZCL_IAS_ACE_PANEL_STATUS_DISARMED	Panel disarmed (all zones disarmed) and ready to arm
ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMED_STAY	Armed stay
ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMED_NIGHT	Armed night
ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMED_AWAY	Armed away
ZB_ZCL_IAS_ACE_PANEL_STATUS_EXIT_DELAY	Exit delay
ZB_ZCL_IAS_ACE_PANEL_STATUS_ENTRY_DELAY	Entry delay
ZB_ZCL_IAS_ACE_PANEL_STATUS_NOT_READY	Not ready to arm
ZB_ZCL_IAS_ACE_PANEL_STATUS_IN_ALARM	In alarm
ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMING_STAY	Arming Stay
ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMING_NIGHT	Arming Night
ZB_ZCL_IAS_ACE_PANEL_STATUS_ARMING_AWAY	Arming Away

zb_zcl_ias_ace_resp_cmd_e

enum zb_zcl_ias_ace_resp_cmd_e

IAS Ace cluster responce command identifiers.

See also

ZCL spec, IAS Ace Cluster, 8.3.2.5

Enumerator
ZB_ZCL_CMD_IAS_ACE_ARM_RESP_ID	Arm Response command, ZCL spec 8.3.2.5.1
ZB_ZCL_CMD_IAS_ACE_GET_ZONE_ID_MAP_RESP_ID	Get Zone ID Map Response command, ZCL spec 8.3.2.5.2
ZB_ZCL_CMD_IAS_ACE_GET_ZONE_INFO_RESP_ID	Get Zone Information Response command, ZCL spec 8.3.2.5.3
ZB_ZCL_CMD_IAS_ACE_ZONE_STATUS_CHANGED_ID	This command updates ACE clients in the system of changes to zone status recorded by the ACE server (e.g., IAS CIE device).
ZB_ZCL_CMD_IAS_ACE_PANEL_STATUS_CHANGED_ID	This command updates ACE clients in the system of changes to zone status recorded by the ACE server (e.g., IAS CIE device).
ZB_ZCL_CMD_IAS_ACE_GET_PANEL_STATUS_RESPONSE_ID	This command updates ACE clients in the system of changes to panel status recorded by the ACE server (e.g., IAS CIE device).
ZB_ZCL_CMD_IAS_ACE_SET_BYPASSED_ZONE_LIST_ID	Sets the list of bypassed zones on the IAS ACE client.
ZB_ZCL_CMD_IAS_ACE_BYPASS_RESPONSE_ID	Provides the response of the security panel to the request from the IAS ACE client to bypass zones via a Bypass command.
ZB_ZCL_CMD_IAS_ACE_GET_ZONE_STATUS_RESPONSE_ID	Get Zone Status Response Command.