st,stm32-temp¶
Vendor: STMicroelectronics
Description¶
STM32 family TEMP node
Properties¶
Properties not inherited from the base binding file.
Name |
Type |
Details |
|---|---|---|
|
|
Temperature sensor voltage in millivolts
Default value: |
|
|
Average slope of T-V chart (in mV/C x10) according to
datasheet "Electrical characteristics/Operating conditions"
STM32F1 Table 5.3.19 (min 4 mV/C, max 4.6, default 4.3)
STM32F4 Table 6.3.21 default 2.5
Default value: |
|
|
Voltage of temperature sensor at 25C in mV according to
datasheet "Electrical characteristics/Operating conditions"
STM32F1 Table 5.3.19 (min 1340, max 1520, default 1430)
STM32F4 Table 6.3.21 default 760
Default value: |
|
|
Negative Temperature Coefficient. True if STM32F1
|
Deprecated properties not inherited from the base binding file.
(None)
Properties inherited from the base binding file, which defines common properties that may be set on many nodes. Not all of these may apply to the “st,stm32-temp” compatible.
Name |
Type |
Details |
|---|---|---|
|
|
Human readable string describing the device (used as device_get_binding() argument)
This property is required. See Important properties for more information. |
|
|
ADC channel for temperature sensor
This property is required. |
|
|
indicates the operational status of a device
Legal values: See Important properties for more information. |
|
|
compatible strings
This property is required. See Important properties for more information. |
|
|
register space
See Important properties for more information. |
|
|
name of each register space
|
|
|
interrupts for device
See Important properties for more information. |
|
|
extended interrupt specifier for device
|
|
|
name of each interrupt
|
|
|
phandle to interrupt controller node
|
|
|
Clock gate information
|
|
|
name of each clock
|
|
|
number of address cells in reg property
|
|
|
number of size cells in reg property
|
|
|
DMA channels specifiers
|
|
|
Provided names of DMA channel specifiers
|
|
|
Provided names of IO channel specifiers
|