OpenAMP Sample Application using resource table¶
Overview¶
This application demonstrates how to use OpenAMP with Zephyr based on a resource table. It is designed to respond to the Linux rpmsg client sample. This sample implementation is compatible with platforms that embed a Linux kernel OS on the main processor and a Zephyr application on the co-processor.
Building the application¶
Zephyr¶
# From the root of the zephyr repository
west build -b None samples/subsys/ipc/openamp_rsc_table
west build -t test
Linux¶
Enable SAMPLE_RPMSG_CLIENT configuration to build and install the rpmsg_client_sample.ko module on the target.
Running the sample¶
Zephyr console¶
Open a serial terminal (minicom, putty, etc.) and connect the board with the following settings:
Speed: 115200
Data: 8 bits
Parity: None
Stop bits: 1
Reset the board.
Linux console¶
Open a Linux shell (minicom, ssh, etc.) and insert a module into the Linux Kernel
root@linuxshell: insmod rpmsg_client_sample.ko
Result on Zephyr console¶
The following message will appear on the corresponding Zephyr console:
***** Booting Zephyr OS v#.##.#-####-g########## *****
Starting application thread!
OpenAMP demo started
Remote core received message 1: hello world!
Remote core received message 2: hello world!
Remote core received message 3: hello world!
...
Remote core received message 100: hello world!
OpenAMP demo ended.